[U-Boot] [PATCH v1] rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'.

[Christoph Muellner]

vcc5v0_host and usbhub_enable share gpio4 RK_PA3,
which is a problem during probing (the second probe
will trigger a -EBUSY, when trying to get the gpio handle).

An analysis of the situation shows, that both regulators
are actually describing the same supply.

This patch removes the (currenlty not successful probing)
regulator vcc5v0_host from the DTS and adds the pinctrl-*
setting to usbhub_enable.

Signed-off-by: Christoph Muellner <christoph.muellner at theobroma-systems.com>

---

 arch/arm/dts/rk3399-puma.dtsi | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index ba9bb4c5994..9a61fbb4536 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -95,6 +95,8 @@
 		regulator-name = "usbhub_enable";
 		enable-active-low;
 		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -146,16 +148,6 @@
 		regulator-always-on;
 	};
 
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-low;
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-	};
-
 	vcc5v0_sys: vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
-- 
2.11.0