[U-Boot] [Patch] Enable I2C0 of NanoPiNeo2
Ronny Lubke
ronny.lubke at metirionic.com
Fri Dec 7 09:15:51 UTC 2018
For getting the I2C0 bus working in u-boot, the used PINS had to be
enabled in the board.c.
In the nanopi_neo2_defconfig you have to set the CONFIG_I2C0_ENABLE=y.
Best regards
Ronny Lubke
-------------------------------------
Engineer
Metirionic GmbH
Strehlener Straße 12 - 14
01069 Dresden
phone: +49-351-873229-26
http://www.metirionic.com/
Geschaeftsfuehrung: Dr. Attila Roemer
Gesellschaftssitz: Dresden
Amtsgericht: Dresden
HRB 32209
-------------- next part --------------
A non-text attachment was scrubbed...
Name: i2c_neo2.patch
Type: text/x-patch
Size: 1703 bytes
Desc: i2c_neo2.patch
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181207/22a3858b/attachment.bin>
More information about the U-Boot
mailing list