[U-Boot] [PATCH v2 0/6] Add support for DM_USB and DM_USB_DEV to TI's K2G platforms

[Jean-Jacques Hiblot]

The K2G platforms can use the generic DWC3 driver instead of relying on the
keystone-xhci driver.
Benefits are:
- moving toward DM
- brings USB gadget for free
- allows us to remove some code

Tested on:
- K2G EVM


Changes in v2:
- rebased on latest version of u-boot-usb/master
- use DM_USB_GADGET instead of DM_USB_DEV

Jean-Jacques Hiblot (6):
  usb: dwc3-generic: make it compatible with "ti,keystone-dwc3"
  board: ks2_evm: Enable the USB clocks if DM_USB is used
  ARM: dts: k2g-evm: enable USB0 and USB1
  PHY: Add phy driver for the keystone USB PHY
  usb: host: replace xhci-keystone driver by the generic dwc3 driver
  configs: k2g_evm: Enable DFU on K2G EVM

 arch/arm/dts/keystone-k2g-evm.dts    |  28 ++++
 arch/arm/dts/keystone-k2g.dtsi       |  56 ++++++++
 board/ti/ks2_evm/board.c             |  12 ++
 configs/k2e_evm_defconfig            |   7 +
 configs/k2e_hs_evm_defconfig         |   7 +
 configs/k2g_evm_defconfig            |  12 ++
 configs/k2g_hs_evm_defconfig         |  12 ++
 configs/k2hk_evm_defconfig           |   7 +
 configs/k2hk_hs_evm_defconfig        |   7 +
 configs/k2l_evm_defconfig            |   7 +
 configs/k2l_hs_evm_defconfig         |   7 +
 drivers/phy/Kconfig                  |  10 ++
 drivers/phy/Makefile                 |   1 +
 drivers/phy/keystone-usb-phy.c       | 109 ++++++++++++++++
 drivers/usb/dwc3/dwc3-generic.c      |   1 +
 drivers/usb/host/Makefile            |   1 -
 drivers/usb/host/xhci-keystone.c     | 240 -----------------------------------
 include/configs/ti_armv7_keystone2.h |  17 ++-
 18 files changed, 294 insertions(+), 247 deletions(-)
 create mode 100644 drivers/phy/keystone-usb-phy.c
 delete mode 100644 drivers/usb/host/xhci-keystone.c

-- 
2.7.4