[U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass

Michal Simek michal.simek at xilinx.com
Wed Dec 5 14:17:48 UTC 2018


On 05. 12. 18 14:26, Marek Vasut wrote:
> On 12/05/2018 09:05 AM, Michal Simek wrote:
>> Generic wrapper requires MISC uclass but dependency is not covered in
>> Kconfig.
>>
>>  misc        0  [ + ]   dwc3-generic-wrapper  |   |-- usb0 at ff9d0000
>>  usb_dev_ge  0  [ + ]   dwc3-generic-periphe  |   |   `-- dwc3 at fe200000
>>  misc        1  [   ]   dwc3-generic-wrapper  |   |-- usb1 at ff9e0000
>>  usb         0  [   ]   dwc3-generic-host     |   |   `-- dwc3 at fe300000
>>  watchdog    0  [ + ]   cdns_wdt              |   `-- watchdog at fd4d0000
>>
>> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>> ---
>>
>>  drivers/usb/dwc3/Kconfig | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>> index 943b7630eba4..9f0b8a2d0b4f 100644
>> --- a/drivers/usb/dwc3/Kconfig
>> +++ b/drivers/usb/dwc3/Kconfig
>> @@ -39,7 +39,7 @@ config USB_DWC3_OMAP
>>  
>>  config USB_DWC3_GENERIC
>>  	bool "Xilinx ZynqMP and similar Platforms"
>> -	depends on DM_USB && USB_DWC3
>> +	depends on DM_USB && USB_DWC3 && MISC
> 
> Platforms which do not select MISC will lose DWC3 now, did you verify
> that no platform is affected ?

This is what it is going to happen when MISC is not enabled.

Model: ZynqMP ZCU100 RevC
Board: Xilinx ZynqMP
I2C:   ready
DRAM:  2 GiB
Cannot find uclass for id 39: please add the UCLASS_DRIVER() declaration
for this UCLASS_... id
Error binding driver 'dwc3-generic-wrapper': -96
Cannot find uclass for id 39: please add the UCLASS_DRIVER() declaration
for this UCLASS_... id
Error binding driver 'dwc3-generic-wrapper': -96
Some drivers failed to bind
Error binding driver 'generic_simple_bus': -96
Some drivers failed to bind
initcall sequence 000000007ff9c3c8 failed at call 0000000008015728 (err=-96)
### ERROR ### Please RESET the board ###

It means if any platform is not enabling MISC then they have bigger
problem then just missing DWC3.

Anyway only ZynqMP board enables it and all of them have MISC enabled.

[u-boot](wd)$ git log -n 1 --oneline
d452f27b3ea8 Prepare v2019.01-rc1
[u-boot](wd)$ git grep DWC3_GENERIC
configs/avnet_ultra96_rev1_defconfig:83:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig:89:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig:82:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig:80:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu100_revC_defconfig:83:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig:108:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu102_revA_defconfig:105:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu102_revB_defconfig:105:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu104_revA_defconfig:88:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu104_revC_defconfig:89:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu106_revA_defconfig:97:CONFIG_USB_DWC3_GENERIC=y
configs/xilinx_zynqmp_zcu111_revA_defconfig:90:CONFIG_USB_DWC3_GENERIC=y
drivers/usb/dwc3/Kconfig:40:config USB_DWC3_GENERIC
drivers/usb/dwc3/Makefile:10:obj-$(CONFIG_USB_DWC3_GENERIC)
+= dwc3-generic.o

Thanks,
Michal


More information about the U-Boot mailing list