[U-Boot] [PATCH V2 06/13] ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCB
Marek Vasut
marek.vasut at gmail.com
Mon Dec 3 23:10:06 UTC 2018
The CPLD node is missing in Linux 4.17 DTs on H3/M3W ULCB, pull the
node into U-Boot specific DT until it hits mainline Linux, to make
syncing of DTs easier.
Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
V2: Rebase on u-boot/master
---
arch/arm/dts/r8a7795-h3ulcb-u-boot.dts | 11 +++++++++++
arch/arm/dts/r8a7796-m3ulcb-u-boot.dts | 11 +++++++++++
arch/arm/dts/ulcb.dtsi | 9 ---------
3 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
index 06bd4f24ca..5cb5e9c6fb 100644
--- a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
+++ b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
@@ -7,3 +7,14 @@
#include "r8a7795-h3ulcb.dts"
#include "r8a7795-u-boot.dtsi"
+
+/ {
+ cpld {
+ compatible = "renesas,ulcb-cpld";
+ status = "okay";
+ gpio-sck = <&gpio6 8 0>;
+ gpio-mosi = <&gpio6 7 0>;
+ gpio-miso = <&gpio6 10 0>;
+ gpio-sstbz = <&gpio2 3 0>;
+ };
+};
diff --git a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
index a1d13ccf28..78bd4f26bd 100644
--- a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
+++ b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
@@ -7,3 +7,14 @@
#include "r8a7796-m3ulcb.dts"
#include "r8a7796-u-boot.dtsi"
+
+/ {
+ cpld {
+ compatible = "renesas,ulcb-cpld";
+ status = "okay";
+ gpio-sck = <&gpio6 8 0>;
+ gpio-mosi = <&gpio6 7 0>;
+ gpio-miso = <&gpio6 10 0>;
+ gpio-sstbz = <&gpio2 3 0>;
+ };
+};
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index e16c7f245e..c805265343 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -24,15 +24,6 @@
stdout-path = "serial0:115200n8";
};
- cpld {
- compatible = "renesas,ulcb-cpld";
- status = "okay";
- gpio-sck = <&gpio6 8 0>;
- gpio-mosi = <&gpio6 7 0>;
- gpio-miso = <&gpio6 10 0>;
- gpio-sstbz = <&gpio2 3 0>;
- };
-
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
--
2.18.0
More information about the U-Boot
mailing list