[U-Boot] [PATCH v2 5/6] usb: host: replace xhci-keystone driver by the generic dwc3 driver

Jean-Jacques Hiblot jjhiblot at ti.com
Tue Dec 4 10:13:00 UTC 2018


The keystone platforms can use the generic DC3 driver. Removing the
keystone-spcecific xchi driver and add the configuration options to enable
the generic DWC3 driver on all K2 platforms.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

Changes in v2: None

 configs/k2e_evm_defconfig            |   7 +
 configs/k2e_hs_evm_defconfig         |   7 +
 configs/k2g_evm_defconfig            |   6 +
 configs/k2g_hs_evm_defconfig         |   6 +
 configs/k2hk_evm_defconfig           |   7 +
 configs/k2hk_hs_evm_defconfig        |   7 +
 configs/k2l_evm_defconfig            |   7 +
 configs/k2l_hs_evm_defconfig         |   7 +
 drivers/usb/host/Makefile            |   1 -
 drivers/usb/host/xhci-keystone.c     | 240 -----------------------------------
 include/configs/ti_armv7_keystone2.h |   7 -
 11 files changed, 54 insertions(+), 248 deletions(-)
 delete mode 100644 drivers/usb/host/xhci-keystone.c

diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index 67b1f30..03a1ceb 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -37,6 +37,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
+CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
@@ -47,13 +48,19 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
index 1abda84..bb7b314 100644
--- a/configs/k2e_hs_evm_defconfig
+++ b/configs/k2e_hs_evm_defconfig
@@ -30,6 +30,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
+CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
@@ -40,13 +41,19 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
index bc4b92b..95c835a 100644
--- a/configs/k2g_evm_defconfig
+++ b/configs/k2g_evm_defconfig
@@ -36,6 +36,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM=y
 # CONFIG_BLK is not set
 CONFIG_SYS_I2C_DAVINCI=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
@@ -50,6 +51,8 @@ CONFIG_PHY_MARVELL=y
 CONFIG_PHY_MICREL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
 CONFIG_REMOTEPROC_TI_POWER=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
@@ -57,7 +60,10 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig
index 66d8220..47c30a6 100644
--- a/configs/k2g_hs_evm_defconfig
+++ b/configs/k2g_hs_evm_defconfig
@@ -29,6 +29,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM=y
 # CONFIG_BLK is not set
 CONFIG_SYS_I2C_DAVINCI=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
@@ -43,6 +44,8 @@ CONFIG_PHY_MARVELL=y
 CONFIG_PHY_MICREL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
 CONFIG_REMOTEPROC_TI_POWER=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
@@ -50,7 +53,10 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index f66d922..700fafd 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -37,6 +37,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
+CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
@@ -47,13 +48,19 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig
index dd91a51..a6caccc 100644
--- a/configs/k2hk_hs_evm_defconfig
+++ b/configs/k2hk_hs_evm_defconfig
@@ -30,6 +30,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
+CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
@@ -40,13 +41,19 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index 4f04caa..cb63808 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -37,6 +37,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
+CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
@@ -47,13 +48,19 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig
index 9ce23de..4ce7801 100644
--- a/configs/k2l_hs_evm_defconfig
+++ b/configs/k2l_hs_evm_defconfig
@@ -29,6 +29,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
+CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
@@ -39,13 +40,19 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_DRIVER_TI_KEYSTONE_NET=y
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 285c20a..948683a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
 obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
 obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
 obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o
-obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
 obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
diff --git a/drivers/usb/host/xhci-keystone.c b/drivers/usb/host/xhci-keystone.c
deleted file mode 100644
index 200b3f0..0000000
--- a/drivers/usb/host/xhci-keystone.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * USB 3.0 DRD Controller
- *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <usb.h>
-#include <asm/arch/psc_defs.h>
-#include <asm/io.h>
-#include <linux/usb/dwc3.h>
-#include <asm/arch/xhci-keystone.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include "xhci.h"
-
-struct kdwc3_irq_regs {
-	u32 revision;	/* 0x000 */
-	u32 rsvd0[3];
-	u32 sysconfig;	/* 0x010 */
-	u32 rsvd1[1];
-	u32 irq_eoi;
-	u32 rsvd2[1];
-	struct {
-		u32 raw_status;
-		u32 status;
-		u32 enable_set;
-		u32 enable_clr;
-	} irqs[16];
-};
-
-struct keystone_xhci {
-	struct xhci_hccr *hcd;
-	struct dwc3 *dwc3_reg;
-	struct xhci_hcor *hcor;
-	struct kdwc3_irq_regs *usbss;
-	struct keystone_xhci_phy *phy;
-};
-
-struct keystone_xhci keystone;
-
-static void keystone_xhci_phy_set(struct keystone_xhci_phy *phy)
-{
-	u32 val;
-
-	/*
-	 * VBUSVLDEXTSEL has a default value of 1 in BootCfg but shouldn't.
-	 * It should always be cleared because our USB PHY has an onchip VBUS
-	 * analog comparator.
-	 */
-	val = readl(&phy->phy_clock);
-	/* quit selecting the vbusvldextsel by default! */
-	val &= ~USB3_PHY_OTG_VBUSVLDECTSEL;
-	writel(val, &phy->phy_clock);
-}
-
-static void keystone_xhci_phy_unset(struct keystone_xhci_phy *phy)
-{
-	u32 val;
-
-	/* Disable the PHY REFCLK clock gate */
-	val = readl(&phy->phy_clock);
-	val &= ~USB3_PHY_REF_SSP_EN;
-	writel(val, &phy->phy_clock);
-}
-
-static int keystone_xhci_core_init(struct dwc3 *dwc3_reg)
-{
-	int ret;
-
-	ret = dwc3_core_init(dwc3_reg);
-	if (ret) {
-		debug("failed to initialize core\n");
-		return -EINVAL;
-	}
-
-	/* We are hard-coding DWC3 core to Host Mode */
-	dwc3_set_mode(dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
-
-	return 0;
-}
-
-int xhci_hcd_init(int index,
-		  struct xhci_hccr **ret_hccr, struct xhci_hcor **ret_hcor)
-{
-	u32 val;
-	int ret;
-	struct xhci_hccr *hcd;
-	struct xhci_hcor *hcor;
-	struct kdwc3_irq_regs *usbss;
-	struct keystone_xhci_phy *phy;
-
-	usbss = (struct kdwc3_irq_regs *)CONFIG_USB_SS_BASE;
-	phy = (struct keystone_xhci_phy *)CONFIG_DEV_USB_PHY_BASE;
-
-	/* Enable the PHY REFCLK clock gate with phy_ref_ssp_en = 1 */
-	val = readl(&(phy->phy_clock));
-	val |= USB3_PHY_REF_SSP_EN;
-	writel(val, &phy->phy_clock);
-
-	mdelay(100);
-
-	/* Release USB from reset */
-	ret = psc_enable_module(KS2_LPSC_USB);
-	if (ret) {
-		puts("Cannot enable USB module");
-		return -1;
-	}
-
-	mdelay(100);
-
-	/* Initialize usb phy */
-	keystone_xhci_phy_set(phy);
-
-	/* soft reset usbss */
-	writel(1, &usbss->sysconfig);
-	while (readl(&usbss->sysconfig) & 1)
-		;
-
-	val = readl(&usbss->revision);
-	debug("usbss revision %x\n", val);
-
-	/* Initialize usb core */
-	hcd = (struct xhci_hccr *)CONFIG_USB_HOST_XHCI_BASE;
-	keystone.dwc3_reg = (struct dwc3 *)(CONFIG_USB_HOST_XHCI_BASE +
-					    DWC3_REG_OFFSET);
-
-	keystone_xhci_core_init(keystone.dwc3_reg);
-
-	/* set register addresses */
-	hcor = (struct xhci_hcor *)((uint32_t)hcd +
-		HC_LENGTH(readl(&hcd->cr_capbase)));
-
-	debug("Keystone2-xhci: init hccr %08x and hcor %08x hc_length %d\n",
-	      (u32)hcd, (u32)hcor,
-	      (u32)HC_LENGTH(xhci_readl(&hcd->cr_capbase)));
-
-	keystone.usbss = usbss;
-	keystone.phy = phy;
-	keystone.hcd = hcd;
-	keystone.hcor = hcor;
-
-	*ret_hccr = hcd;
-	*ret_hcor = hcor;
-
-	return 0;
-}
-
-static int keystone_xhci_phy_suspend(void)
-{
-	int loop_cnt = 0;
-	struct xhci_hcor *hcor;
-	uint32_t *portsc_1 = NULL;
-	uint32_t *portsc_2 = NULL;
-	u32 val, usb2_pls, usb3_pls, event_q;
-	struct dwc3 *dwc3_reg = keystone.dwc3_reg;
-
-	/* set register addresses */
-	hcor = keystone.hcor;
-
-	/* Bypass Scrambling and Set Shorter Training sequence for simulation */
-	val = DWC3_GCTL_PWRDNSCALE(0x4b0) | DWC3_GCTL_PRTCAPDIR(0x2);
-	writel(val, &dwc3_reg->g_ctl);
-
-	/* GUSB2PHYCFG */
-	val = readl(&dwc3_reg->g_usb2phycfg[0]);
-
-	/* assert bit 6 (SusPhy) */
-	val |= DWC3_GUSB2PHYCFG_SUSPHY;
-	writel(val, &dwc3_reg->g_usb2phycfg[0]);
-
-	/* GUSB3PIPECTL */
-	val = readl(&dwc3_reg->g_usb3pipectl[0]);
-
-	/*
-	 * assert bit 29 to allow PHY to go to suspend when idle
-	 * and cause the USB3 SS PHY to enter suspend mode
-	 */
-	val |= (BIT(29) | DWC3_GUSB3PIPECTL_SUSPHY);
-	writel(val, &dwc3_reg->g_usb3pipectl[0]);
-
-	/*
-	 * Steps necessary to allow controller to suspend even when
-	 * VBUS is HIGH:
-	 * - Init DCFG[2:0] (DevSpd) to: 1=FS
-	 * - Init GEVNTADR0 to point to an eventQ
-	 * - Init GEVNTSIZ0 to 0x0100 to specify the size of the eventQ
-	 * - Init DCTL::Run_nStop = 1
-	 */
-	writel(0x00020001, &dwc3_reg->d_cfg);
-	/* TODO: local2global( (Uint32) eventQ )? */
-	writel((u32)&event_q, &dwc3_reg->g_evnt_buf[0].g_evntadrlo);
-	writel(0, &dwc3_reg->g_evnt_buf[0].g_evntadrhi);
-	writel(0x4, &dwc3_reg->g_evnt_buf[0].g_evntsiz);
-	/* Run */
-	writel(DWC3_DCTL_RUN_STOP, &dwc3_reg->d_ctl);
-
-	mdelay(100);
-
-	/* Wait for USB2 & USB3 PORTSC::PortLinkState to indicate suspend */
-	portsc_1 = (uint32_t *)(&hcor->portregs[0].or_portsc);
-	portsc_2 = (uint32_t *)(&hcor->portregs[1].or_portsc);
-	usb2_pls = 0;
-	usb3_pls = 0;
-	do {
-		++loop_cnt;
-		usb2_pls = (readl(portsc_1) & PORT_PLS_MASK) >> 5;
-		usb3_pls = (readl(portsc_2) & PORT_PLS_MASK) >> 5;
-	} while (((usb2_pls != 0x4) || (usb3_pls != 0x4)) && loop_cnt < 1000);
-
-	if (usb2_pls != 0x4 || usb3_pls != 0x4) {
-		debug("USB suspend failed - PLS USB2=%02x, USB3=%02x\n",
-		      usb2_pls, usb3_pls);
-		return -1;
-	}
-
-	debug("USB2 and USB3 PLS - Disabled, loop_cnt=%d\n", loop_cnt);
-	return 0;
-}
-
-void xhci_hcd_stop(int index)
-{
-	/* Disable USB */
-	if (keystone_xhci_phy_suspend())
-		return;
-
-	if (psc_disable_module(KS2_LPSC_USB)) {
-		debug("PSC disable module USB failed!\n");
-		return;
-	}
-
-	/* Disable PHY */
-	keystone_xhci_phy_unset(keystone.phy);
-
-/*	memset(&keystone, 0, sizeof(struct keystone_xhci)); */
-	debug("xhci_hcd_stop OK.\n");
-}
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 5e504f6..fae72e7 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -169,13 +169,6 @@
 #define CONFIG_SYS_NAND_MAX_CHIPS		1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 
-/* USB Configuration */
-#define CONFIG_USB_XHCI_KEYSTONE
-#define CONFIG_USB_SS_BASE			KS2_USB_SS_BASE
-#define CONFIG_USB_HOST_XHCI_BASE		KS2_USB_HOST_XHCI_BASE
-#define CONFIG_DEV_USB_PHY_BASE			KS2_DEV_USB_PHY_BASE
-#define CONFIG_USB_PHY_CFG_BASE			KS2_USB_PHY_CFG_BASE
-
 /* U-Boot general configuration */
 #define CONFIG_MX_CYCLIC
 #define CONFIG_TIMESTAMP
-- 
2.7.4



More information about the U-Boot mailing list