[U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH

[Jagan Teki]

Sopine has Winbond SPI flash, so enable the same to use
flash on Sopine board.

Cc: TL Lim <tllim at pine64.org>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 .../dts/sun50i-a64-sopine-baseboard-u-boot.dtsi  | 16 ++++++++++++++++
 configs/sopine_baseboard_defconfig               |  7 +++++++
 2 files changed, 23 insertions(+)
 create mode 100644 arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi

diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi b/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
new file mode 100644
index 0000000000..9661b95d15
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan at amarulasolutions.com>
+ */
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
+
+&spi0  {
+	flash at 0 {
+		compatible = "spi-flash";
+	};
+};
diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig
index 0a189fc03d..5e6dc33d4d 100644
--- a/configs/sopine_baseboard_defconfig
+++ b/configs/sopine_baseboard_defconfig
@@ -12,9 +12,16 @@ CONFIG_SPL_SPI_SUNXI=y
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_SUN6I_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-- 
2.18.0.321.gffc6fa0e3