[U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx High Security EVM with UART/USB Boot support

[Lokesh Vutla]

On 30/11/18 10:41 PM, Andrew F. Davis wrote:
> Add a new defconfig file for the AM57xx High Security EVM. This config
> is specific for the case of UART/USB booting.

Can you share the steps on how you verified uart boot?

Thanks and regards,
Lokesh

> 
> Signed-off-by: Andrew F. Davis <afd at ti.com>
> ---
>   MAINTAINERS                          |  1 +
>   configs/am57xx_hs_evm_uart_defconfig | 92 ++++++++++++++++++++++++++++
>   2 files changed, 93 insertions(+)
>   create mode 100644 configs/am57xx_hs_evm_uart_defconfig
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d0c208b93d..b7366cfc0a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -647,6 +647,7 @@ F:	configs/am335x_hs_evm_defconfig
>   F:	configs/am335x_hs_evm_uart_defconfig
>   F:	configs/am43xx_hs_evm_defconfig
>   F:	configs/am57xx_hs_evm_defconfig
> +F:	configs/am57xx_hs_evm_uart_defconfig
>   F:	configs/dra7xx_hs_evm_defconfig
>   F:	configs/dra7xx_hs_evm_uart_defconfig
>   F:	configs/k2hk_hs_evm_defconfig
> diff --git a/configs/am57xx_hs_evm_uart_defconfig b/configs/am57xx_hs_evm_uart_defconfig
> new file mode 100644
> index 0000000000..a0c42387ec
> --- /dev/null
> +++ b/configs/am57xx_hs_evm_uart_defconfig
> @@ -0,0 +1,92 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_OMAP2PLUS=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TI_COMMON_CMD_OPTIONS=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_OMAP54XX=y
> +CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
> +CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
> +CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
> +CONFIG_ISW_ENTRY_ADDR=0x40306d50
> +CONFIG_TARGET_AM57XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI_SUPPORT=y
> +CONFIG_ARMV7_LPAE=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_FIT_IMAGE_POST_PROCESS=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +# CONFIG_MISC_INIT_R is not set
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SPL_DMA_SUPPORT=y
> +# CONFIG_SPL_NAND_SUPPORT is not set
> +CONFIG_SPL_RAM_SUPPORT=y
> +CONFIG_SPL_SPI_LOAD=y
> +CONFIG_SPL_USB_GADGET_SUPPORT=y
> +CONFIG_SPL_DFU=y
> +CONFIG_SPL_YMODEM_SUPPORT=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
> +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_DM=y
> +CONFIG_SPL_DM=y
> +CONFIG_SCSI_AHCI=y
> +# CONFIG_BLK is not set
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_USB_FUNCTION_FASTBOOT=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x82000000
> +CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
> +CONFIG_FASTBOOT_USB_DEV=1
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_OMAP_HS=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_DM_ETH=y
> +CONFIG_MII=y
> +CONFIG_DRIVER_TI_CPSW=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_PALMAS=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_PALMAS=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_TI_QSPI=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GADGET=y
> +CONFIG_USB_DWC3_OMAP=y
> +CONFIG_USB_DWC3_PHY_OMAP=y
> +CONFIG_OMAP_USB_PHY=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
>