[U-Boot] [PATCH 5/7] defconfigs: Add config for DRA7xx High Security EVM with UART/USB Boot support
Lokesh Vutla
lokeshvutla at ti.com
Mon Dec 3 05:22:40 UTC 2018
On 30/11/18 10:41 PM, Andrew F. Davis wrote:
> Add a new defconfig file for the DRA7xx High Security EVM. This config
> is specific for the case of UART/USB booting.
How did you test UART boot on dra7 hs evm? IIRC, UART1 is routed out on the
board. But ROM uses UART3 for loading uart images.
Thanks and reagrds,
Lokesh
>
> Signed-off-by: Andrew F. Davis <afd at ti.com>
> ---
> MAINTAINERS | 1 +
> configs/dra7xx_hs_evm_uart_defconfig | 106 +++++++++++++++++++++++++++
> 2 files changed, 107 insertions(+)
> create mode 100644 configs/dra7xx_hs_evm_uart_defconfig
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 214629e283..d0c208b93d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -648,6 +648,7 @@ F: configs/am335x_hs_evm_uart_defconfig
> F: configs/am43xx_hs_evm_defconfig
> F: configs/am57xx_hs_evm_defconfig
> F: configs/dra7xx_hs_evm_defconfig
> +F: configs/dra7xx_hs_evm_uart_defconfig
> F: configs/k2hk_hs_evm_defconfig
> F: configs/k2e_hs_evm_defconfig
> F: configs/k2g_hs_evm_defconfig
> diff --git a/configs/dra7xx_hs_evm_uart_defconfig b/configs/dra7xx_hs_evm_uart_defconfig
> new file mode 100644
> index 0000000000..7842851491
> --- /dev/null
> +++ b/configs/dra7xx_hs_evm_uart_defconfig
> @@ -0,0 +1,106 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_OMAP2PLUS=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TI_COMMON_CMD_OPTIONS=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_OMAP54XX=y
> +CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
> +CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
> +CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
> +CONFIG_ISW_ENTRY_ADDR=0x40306d50
> +CONFIG_TARGET_DRA7XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI_SUPPORT=y
> +CONFIG_ARMV7_LPAE=y
> +CONFIG_AHCI=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_FIT_IMAGE_POST_PROCESS=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +# CONFIG_MISC_INIT_R is not set
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SPL_DMA_SUPPORT=y
> +# CONFIG_SPL_NAND_SUPPORT is not set
> +CONFIG_SPL_RAM_SUPPORT=y
> +CONFIG_SPL_SPI_LOAD=y
> +CONFIG_SPL_USB_GADGET_SUPPORT=y
> +CONFIG_SPL_DFU=y
> +CONFIG_SPL_YMODEM_SUPPORT=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
> +CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm dra76-evm"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_DM=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_DWC_AHCI=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_DFU_SF=y
> +CONFIG_USB_FUNCTION_FASTBOOT=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x82000000
> +CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_DM_GPIO=y
> +CONFIG_PCF8575_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS200_SUPPORT=y
> +CONFIG_MMC_OMAP_HS=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_DM_ETH=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_MII=y
> +CONFIG_DRIVER_TI_CPSW=y
> +CONFIG_SPL_PHY=y
> +CONFIG_PIPE3_PHY=y
> +CONFIG_PMIC_PALMAS=y
> +CONFIG_PMIC_LP873X=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_REGULATOR_PALMAS=y
> +CONFIG_DM_REGULATOR_LP873X=y
> +CONFIG_DM_SCSI=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_TI_QSPI=y
> +CONFIG_TIMER=y
> +CONFIG_OMAP_TIMER=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_XHCI_DRA7XX_INDEX=1
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GADGET=y
> +CONFIG_USB_DWC3_OMAP=y
> +CONFIG_USB_DWC3_PHY_OMAP=y
> +CONFIG_OMAP_USB_PHY=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
>
More information about the U-Boot
mailing list