[U-Boot] [PATCH v4 0/7] Add support for the SoCs found in Microsemi switches
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Mon Dec 17 23:43:11 UTC 2018
Am 14.12.18 um 16:16 schrieb Gregory CLEMENT:
> Hello,
>
> For the record this the fourth version of the series adding the
> support of 2 SoCs: Ocelot and Luton from Microsemi. Both of them
> belongs to the same family Vcore III.
>
> We found them on various advanced switches product.
>
> The support for Ocelot already have been submit to Linux, but not yet
> the Luton support.
>
> The comments on v3 were fewer and quite easy to address, so I am able
> to send a new version right one (hopping it will be the final one :)
> ).
>
> Gregory
>
> Changelog:
>
> v3 -> v4:
>
> - add the support for the legacy kernel more generic and more related
> to the old bootloader: redboot
> - removed useless test on CONFIG_ARCH_MSCC in
> arch/mips/mach-mscc/include/ioremap.h
> - add an explanation about the cache instruction lock in
> hal_vcoreiii_ddr_failed()
> - use __raw_read/write instead of directly use pointer dereferencing
> - use rmb instead of asm volatile("" : : : "memory");
> - remove remaining C++ style comment
> - use __maybe_unused instead of __attribute__ ((unused))
> - indent by an extra space the instructions in the delay slot
>
>
> v2 -> v3:
> - Added n entry in the MAINTAINER file for the SoCs
> - Fixup the last errors from checkpatch, the remaining ones are only
> about volatile, long line and Kconfig, but each ones have good
> reason to be here.
> - Add SPI NAND flash support in device tree and configuration files,
> the driver are already be merged in U-Boot.
> - In order to improve boot time, setup the TLB to allow using cache
> in the memory mapped to the SPI NOR.
> - Removed all the macro REG_CFG to only keep direct access to memory.
> - Put back the setting of the interrupt map as it is needed by
> mainline kernel (without it the kernel doesn't finish to boot)
> - During DDR training, prevent the compiler reordering the
> instruction.
> - Add early debug support to Ocelot (it was already done for Luton)
>
> v1 -> v2:
> - a big clean-up for indentation and some style issue
> - usage of the clrsetbits family functions where it was possible
> - split the patches for Ocelot and Luton
> - add a new patch to introduce the icache_lock function which was in
> the mscc directory in the first version
> - remove more unused define in the platform header files
> - use the automatic cache size detection instead of hard coding it
> - reduce the tlb init to only two entries for the IO as needed by the
> kernel
> - remove the interrupt disabling
> - fix the ddr init for luton
>
> Gregory CLEMENT (7):
> MIPS: move create_tlb() in an proper header: mipsregs.h
> MIPS: Allow to prefetch and lock instructions into cache
> MSCC: add support for Ocelot SoCs
> MSCC: add support for Luton SoCs
> MSCC: add board support for the Ocelots based evaluation boards
> MSCC: add board support for the Luton based evaluation board
> MIPS: bootm: Add support for compatibility with redboot
>
> MAINTAINERS | 13 +
> arch/mips/Kconfig | 10 +
> arch/mips/Makefile | 1 +
> arch/mips/cpu/cpu.c | 10 -
> arch/mips/dts/luton_pcb091.dts | 36 +
> arch/mips/dts/mscc,luton.dtsi | 87 ++
> arch/mips/dts/mscc,ocelot.dtsi | 152 ++++
> arch/mips/dts/mscc,ocelot_pcb.dtsi | 42 +
> arch/mips/dts/ocelot_pcb120.dts | 12 +
> arch/mips/dts/ocelot_pcb123.dts | 12 +
> arch/mips/include/asm/cacheops.h | 19 +
> arch/mips/include/asm/mipsregs.h | 11 +
> arch/mips/lib/bootm.c | 76 +-
> arch/mips/mach-mscc/Kconfig | 86 ++
> arch/mips/mach-mscc/Makefile | 6 +
> arch/mips/mach-mscc/cpu.c | 102 +++
> arch/mips/mach-mscc/dram.c | 73 ++
> arch/mips/mach-mscc/include/ioremap.h | 49 ++
> arch/mips/mach-mscc/include/mach/common.h | 28 +
> arch/mips/mach-mscc/include/mach/ddr.h | 814 ++++++++++++++++++
> .../mips/mach-mscc/include/mach/luton/luton.h | 24 +
> .../include/mach/luton/luton_devcpu_gcb.h | 14 +
> .../include/mach/luton/luton_icpu_cfg.h | 245 ++++++
> .../mach-mscc/include/mach/ocelot/ocelot.h | 24 +
> .../include/mach/ocelot/ocelot_devcpu_gcb.h | 21 +
> .../include/mach/ocelot/ocelot_icpu_cfg.h | 274 ++++++
> arch/mips/mach-mscc/include/mach/tlb.h | 55 ++
> arch/mips/mach-mscc/lowlevel_init.S | 30 +
> arch/mips/mach-mscc/lowlevel_init_luton.S | 62 ++
> arch/mips/mach-mscc/reset.c | 30 +
> board/mscc/luton/Kconfig | 14 +
> board/mscc/luton/Makefile | 3 +
> board/mscc/luton/luton.c | 28 +
> board/mscc/ocelot/Kconfig | 14 +
> board/mscc/ocelot/Makefile | 4 +
> board/mscc/ocelot/ocelot.c | 58 ++
> configs/mscc_luton_defconfig | 66 ++
> configs/mscc_ocelot_defconfig | 73 ++
> configs/mscc_ocelot_pcb120_defconfig | 66 ++
> include/configs/vcoreiii.h | 82 ++
> 40 files changed, 2796 insertions(+), 30 deletions(-)
> create mode 100644 arch/mips/dts/luton_pcb091.dts
> create mode 100644 arch/mips/dts/mscc,luton.dtsi
> create mode 100644 arch/mips/dts/mscc,ocelot.dtsi
> create mode 100644 arch/mips/dts/mscc,ocelot_pcb.dtsi
> create mode 100644 arch/mips/dts/ocelot_pcb120.dts
> create mode 100644 arch/mips/dts/ocelot_pcb123.dts
> create mode 100644 arch/mips/mach-mscc/Kconfig
> create mode 100644 arch/mips/mach-mscc/Makefile
> create mode 100644 arch/mips/mach-mscc/cpu.c
> create mode 100644 arch/mips/mach-mscc/dram.c
> create mode 100644 arch/mips/mach-mscc/include/ioremap.h
> create mode 100644 arch/mips/mach-mscc/include/mach/common.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ddr.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_devcpu_gcb.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_icpu_cfg.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h
> create mode 100644 arch/mips/mach-mscc/include/mach/tlb.h
> create mode 100644 arch/mips/mach-mscc/lowlevel_init.S
> create mode 100644 arch/mips/mach-mscc/lowlevel_init_luton.S
> create mode 100644 arch/mips/mach-mscc/reset.c
> create mode 100644 board/mscc/luton/Kconfig
> create mode 100644 board/mscc/luton/Makefile
> create mode 100644 board/mscc/luton/luton.c
> create mode 100644 board/mscc/ocelot/Kconfig
> create mode 100644 board/mscc/ocelot/Makefile
> create mode 100644 board/mscc/ocelot/ocelot.c
> create mode 100644 configs/mscc_luton_defconfig
> create mode 100644 configs/mscc_ocelot_defconfig
> create mode 100644 configs/mscc_ocelot_pcb120_defconfig
> create mode 100644 include/configs/vcoreiii.h
>
series applied to u-boot-mips, thanks.
I left out the last patch to avoid patching generic code at this point
of the 2019.01 release cycle. Also I'm still not happy with it, some
further comments will follow.
As discussed I did a resync of the defconfig files and removed
CONFIG_OF_EMBED.
--
- Daniel
More information about the U-Boot
mailing list