[U-Boot] [PATCH v2 0/7] Add USB boot to HS DRA7xx/AM57xx
Andrew F. Davis
afd at ti.com
Wed Dec 5 17:51:29 UTC 2018
Hello all,
This series adds USB boot support to HS DRA7xx/AM57xx platforms.
We start by cleaning up DFU boot in SPL support. What is done in the
first patch for DFU, if acceptable, should be done to the other boot
modes.
The 4th patch is needed as on HS devices a header is added to the
boot image that tells the ROM where to load this image. This only
works for block device booting as the ROM can read the header and
move the image into memory in steps. For streaming boot modes USB/
UART/NET the image is placed in memory as it is received from the
media live. This means the header is ignored and the image has
a fixed offset in memory.
For AM47xx we align the boot modes by making the offset for block
device booting the same as the fixed offset for streaming boot modes,
in this way only one defconfig is needed. For DRA7xx/AM57xx the signing
tools will need to be updated to support specifying this address, when
this is done the offset in the base HS defconfig can be moved to match
the new offset and the defconfigs added here in patch 5 and 6 can be
unified back into the base HS defconfig.
The last patch updates the docs for the same above.
Thanks,
Andrew
Changes from v1:
- Drop explicit UART boot support from DRA7xx as this cannot be tested
Andrew F. Davis (7):
spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
dfu: Make DFU support more SPL friendly
dfu: Remove dependency on HUSH parser in SPL
ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
defconfigs: Add config for DRA7xx High Security EVM with USB Boot
support
defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot
support
doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
MAINTAINERS | 2 +
arch/arm/cpu/armv8/zynqmp/spl.c | 2 +-
arch/arm/mach-omap2/Kconfig | 13 ++++
arch/arm/mach-omap2/am33xx/Kconfig | 15 ----
arch/arm/mach-omap2/boot-common.c | 2 +-
common/Makefile | 3 +-
common/cli.c | 2 +-
common/spl/Kconfig | 6 +-
common/spl/Makefile | 2 +-
common/spl/spl_ram.c | 4 +-
configs/am57xx_hs_evm_usb_defconfig | 92 ++++++++++++++++++++++++
configs/dra7xx_hs_evm_usb_defconfig | 106 ++++++++++++++++++++++++++++
doc/README.ti-secure | 8 ++-
drivers/Makefile | 3 +-
drivers/dfu/Makefile | 12 ++--
drivers/usb/gadget/Makefile | 2 +-
include/configs/dra7xx_evm.h | 2 +-
include/configs/ti_omap5_common.h | 2 +-
include/configs/xilinx_zynqmp.h | 4 +-
include/dfu.h | 10 +--
20 files changed, 246 insertions(+), 46 deletions(-)
create mode 100644 configs/am57xx_hs_evm_usb_defconfig
create mode 100644 configs/dra7xx_hs_evm_usb_defconfig
--
2.19.1
More information about the U-Boot
mailing list