[U-Boot] [PATCH v4 05/10] arm: mvebu: turris_mox: Update defconfig

[Marek Behún]

Add gpio command to defconfig - this can be used to detect whether the
button is pressed or light LEDs.
Add DS1307 RTC driver and the date command.
Add CONFIG_WATCHDOG, so that U-Boot calls watchdog_reset.
Add CONFIG_MISC_INIT_R so that ethernet addresses are read from OTP
before network controller is initialized.

Signed-off-by: Marek Behún <marek.behun at nic.cz>
Reviewed-by: Stefan Roese <sr at denx.de>
---
 configs/turris_mox_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
index 749ed31acd..e89e6617ca 100644
--- a/configs/turris_mox_defconfig
+++ b/configs/turris_mox_defconfig
@@ -13,7 +13,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_MISC_INIT_R=y
 CONFIG_CMD_CLK=y
+CONFIG_CMD_GPIO=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -24,6 +26,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_DATE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_MVEBU_BUBT=y
 CONFIG_CMD_BTRFS=y
@@ -63,6 +66,8 @@ CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_MVEBU_A3700_UART=y
 CONFIG_MVEBU_A3700_SPI=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -73,6 +78,7 @@ CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_WATCHDOG=y
 CONFIG_WDT=y
 CONFIG_WDT_ARMADA_37XX=y
 CONFIG_SHA1=y
-- 
2.18.1