[U-Boot] [RESEND PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device

[Jean-Jacques Hiblot]

This allows the driver to be used without OF_CONTROL.
AM335x support DM_SPL but does not use SPL_OF_CONTROL. Enabling DM_I2C in
SPL thus requires that the omap I2C can be passed platdata.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---

Changes in v3: None
Changes in v2: None

 arch/arm/include/asm/arch-am33xx/i2c.h |  2 ++
 arch/arm/include/asm/omap_i2c.h        | 24 ++++++++++++++++++++++++
 drivers/i2c/omap24xx_i2c.c             | 21 +++++++++++----------
 3 files changed, 37 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/include/asm/omap_i2c.h

diff --git a/arch/arm/include/asm/arch-am33xx/i2c.h b/arch/arm/include/asm/arch-am33xx/i2c.h
index b3cc3df..c2a9850 100644
--- a/arch/arm/include/asm/arch-am33xx/i2c.h
+++ b/arch/arm/include/asm/arch-am33xx/i2c.h
@@ -6,6 +6,8 @@
 #ifndef _I2C_AM33XX_H_
 #define _I2C_AM33XX_H_
 
+#include <asm/omap_i2c.h>
+
 #define  I2C_BASE1		0x44E0B000
 #define  I2C_BASE2		0x4802A000
 #define  I2C_BASE3		0x4819C000
diff --git a/arch/arm/include/asm/omap_i2c.h b/arch/arm/include/asm/omap_i2c.h
new file mode 100644
index 0000000..c1695cb
--- /dev/null
+++ b/arch/arm/include/asm/omap_i2c.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _OMAP_I2C_H
+#define _OMAP_I2C_H
+
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_DM_I2C
+
+/* Information about a GPIO bank */
+struct omap_i2c_platdata {
+	ulong base;	/* address of registers in physical memory */
+	int speed;
+	int ip_rev;
+};
+
+#endif
+
+enum {
+	OMAP_I2C_REV_V1 = 0,
+	OMAP_I2C_REV_V2 = 1,
+};
+
+#endif /* _OMAP_I2C_H */
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 9f71639..4b93e02 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -43,6 +43,7 @@
 #include <i2c.h>
 
 #include <asm/io.h>
+#include <asm/omap_i2c.h>
 
 /*
  * Provide access to architecture-specific I2C header files for platforms
@@ -62,11 +63,6 @@
 #define I2C_WAIT	200
 
 enum {
-	OMAP_I2C_REV_V1 = 0,
-	OMAP_I2C_REV_V2 = 1,
-};
-
-enum {
 	OMAP_I2C_REV_REG = 0,		/* Only on IP V1 (OMAP34XX) */
 	OMAP_I2C_IE_REG,		/* Only on IP V1 (OMAP34XX) */
 	OMAP_I2C_STAT_REG,
@@ -1051,8 +1047,12 @@ static int omap_i2c_probe_chip(struct udevice *bus, uint chip_addr,
 static int omap_i2c_probe(struct udevice *bus)
 {
 	struct omap_i2c *priv = dev_get_priv(bus);
+	struct omap_i2c_platdata *plat = dev_get_platdata(bus);
 
-	priv->ip_rev = dev_get_driver_data(bus);
+	priv->speed = plat->speed;
+	priv->regs = map_physmem(plat->base, sizeof(void *),
+				 MAP_NOCACHE);
+	priv->ip_rev = plat->ip_rev;
 
 	__omap24_i2c_init(priv->regs, priv->ip_rev, priv->speed, 0,
 			  &priv->waitdelay);
@@ -1063,11 +1063,11 @@ static int omap_i2c_probe(struct udevice *bus)
 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 static int omap_i2c_ofdata_to_platdata(struct udevice *bus)
 {
-	struct omap_i2c *priv = dev_get_priv(bus);
+	struct omap_i2c_platdata *plat = dev_get_platdata(bus);
 
-	priv->regs = map_physmem(devfdt_get_addr(bus), sizeof(void *),
-				 MAP_NOCACHE);
-	priv->speed = CONFIG_SYS_OMAP24_I2C_SPEED;
+	plat->base = devfdt_get_addr(bus);
+	plat->speed = dev_read_u32_default(bus, "clock-frequency", 100000);
+	plat->ip_rev = dev_get_driver_data(bus);
 
 	return 0;
 }
@@ -1091,6 +1091,7 @@ U_BOOT_DRIVER(i2c_omap) = {
 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 	.of_match = omap_i2c_ids,
 	.ofdata_to_platdata = omap_i2c_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct omap_i2c_platdata),
 #endif
 	.probe	= omap_i2c_probe,
 	.priv_auto_alloc_size = sizeof(struct omap_i2c),
-- 
2.7.4