[U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board

[Daniel Schwierzeck]

Am 14.12.18 um 16:16 schrieb Gregory CLEMENT:
> Adding the support for the Luton boards PCB91 which share common code with
> the Ocelots boards, including board code, device tree and configuration.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
> ---
>  MAINTAINERS                    |  1 +
>  arch/mips/dts/luton_pcb091.dts | 36 ++++++++++++++
>  arch/mips/dts/mscc,luton.dtsi  | 87 ++++++++++++++++++++++++++++++++++
>  arch/mips/mach-mscc/Kconfig    |  2 +
>  board/mscc/luton/Kconfig       | 14 ++++++
>  board/mscc/luton/Makefile      |  3 ++
>  board/mscc/luton/luton.c       | 28 +++++++++++
>  configs/mscc_luton_defconfig   | 66 ++++++++++++++++++++++++++
>  8 files changed, 237 insertions(+)
>  create mode 100644 arch/mips/dts/luton_pcb091.dts
>  create mode 100644 arch/mips/dts/mscc,luton.dtsi
>  create mode 100644 board/mscc/luton/Kconfig
>  create mode 100644 board/mscc/luton/Makefile
>  create mode 100644 board/mscc/luton/luton.c
>  create mode 100644 configs/mscc_luton_defconfig
> 

> diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig
> new file mode 100644
> index 0000000000..47fe12b6ee
> --- /dev/null
> +++ b/configs/mscc_luton_defconfig
> @@ -0,0 +1,66 @@
> +CONFIG_MIPS=y
> +CONFIG_SYS_TEXT_BASE=0x40000000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_DEBUG_UART_BOARD_INIT=y
> +CONFIG_DEBUG_UART_BASE=0x70100000
> +CONFIG_DEBUG_UART_CLOCK=208333333
> +CONFIG_ARCH_MSCC=y
> +CONFIG_TARGET_LUTON_PCB091=y
> +CONFIG_DDRTYPE_MT47H128M8HQ=y
> +CONFIG_SYS_LITTLE_ENDIAN=y
> +CONFIG_MIPS_BOOT_FDT=y
> +CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091"
> +CONFIG_DEBUG_UART=y
> +CONFIG_FIT=y
> +CONFIG_BOOTDELAY=3
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS0,115200"
> +CONFIG_LOGLEVEL=7
> +CONFIG_DISPLAY_CPUINFO=y
> +CONFIG_SYS_PROMPT="pcb091 # "
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_CONSOLE is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_CRC32 is not set
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_DHCP=y
> +# CONFIG_NET_TFTP_VARS is not set
> +# CONFIG_CMD_NFS is not set
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m at 1m(linux)"
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_OF_EMBED=y

this gives now a build warning

===================== WARNING ======================
CONFIG_OF_EMBED is enabled. This option should only
be used for debugging purposes. Please use
CONFIG_OF_SEPARATE for boards in mainline.
See doc/README.fdt-control for more info.
====================================================


Shall I change it when applying or do you want to test it first and send
a follow-up patch?

> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_CLK=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_SPI_FLASH_MTD=y
> +CONFIG_DM_ETH=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCONF=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_SOFT_SPI=y
> +CONFIG_LZMA=y
> +CONFIG_XZ=y
> 

-- 
- Daniel