[U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board

[Gregory CLEMENT]

Hi Daniel,
 
 On sam., déc. 15 2018, Daniel Schwierzeck <daniel.schwierzeck at gmail.com> wrote:

> Am 14.12.18 um 16:16 schrieb Gregory CLEMENT:
>> Adding the support for the Luton boards PCB91 which share common code with
>> the Ocelots boards, including board code, device tree and configuration.
>> 
>> Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
>> ---
>>  MAINTAINERS                    |  1 +
>>  arch/mips/dts/luton_pcb091.dts | 36 ++++++++++++++
>>  arch/mips/dts/mscc,luton.dtsi  | 87 ++++++++++++++++++++++++++++++++++
>>  arch/mips/mach-mscc/Kconfig    |  2 +
>>  board/mscc/luton/Kconfig       | 14 ++++++
>>  board/mscc/luton/Makefile      |  3 ++
>>  board/mscc/luton/luton.c       | 28 +++++++++++
>>  configs/mscc_luton_defconfig   | 66 ++++++++++++++++++++++++++
>>  8 files changed, 237 insertions(+)
>>  create mode 100644 arch/mips/dts/luton_pcb091.dts
>>  create mode 100644 arch/mips/dts/mscc,luton.dtsi
>>  create mode 100644 board/mscc/luton/Kconfig
>>  create mode 100644 board/mscc/luton/Makefile
>>  create mode 100644 board/mscc/luton/luton.c
>>  create mode 100644 configs/mscc_luton_defconfig
>> 
>
>> diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig
>> new file mode 100644
>> index 0000000000..47fe12b6ee
>> --- /dev/null
>> +++ b/configs/mscc_luton_defconfig
>> @@ -0,0 +1,66 @@
>> +CONFIG_MIPS=y
>> +CONFIG_SYS_TEXT_BASE=0x40000000
>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>> +CONFIG_DEBUG_UART_BOARD_INIT=y
>> +CONFIG_DEBUG_UART_BASE=0x70100000
>> +CONFIG_DEBUG_UART_CLOCK=208333333
>> +CONFIG_ARCH_MSCC=y
>> +CONFIG_TARGET_LUTON_PCB091=y
>> +CONFIG_DDRTYPE_MT47H128M8HQ=y
>> +CONFIG_SYS_LITTLE_ENDIAN=y
>> +CONFIG_MIPS_BOOT_FDT=y
>> +CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091"
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_FIT=y
>> +CONFIG_BOOTDELAY=3
>> +CONFIG_USE_BOOTARGS=y
>> +CONFIG_BOOTARGS="console=ttyS0,115200"
>> +CONFIG_LOGLEVEL=7
>> +CONFIG_DISPLAY_CPUINFO=y
>> +CONFIG_SYS_PROMPT="pcb091 # "
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_CONSOLE is not set
>> +# CONFIG_CMD_ELF is not set
>> +# CONFIG_CMD_EXPORTENV is not set
>> +# CONFIG_CMD_IMPORTENV is not set
>> +# CONFIG_CMD_CRC32 is not set
>> +CONFIG_CMD_MD5SUM=y
>> +CONFIG_CMD_MEMINFO=y
>> +CONFIG_CMD_MEMTEST=y
>> +# CONFIG_CMD_FLASH is not set
>> +CONFIG_CMD_GPIO=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_SPI=y
>> +CONFIG_CMD_DHCP=y
>> +# CONFIG_NET_TFTP_VARS is not set
>> +# CONFIG_CMD_NFS is not set
>> +CONFIG_CMD_PING=y
>> +CONFIG_CMD_MTDPARTS=y
>> +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
>> +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m at 1m(linux)"
>> +# CONFIG_ISO_PARTITION is not set
>> +CONFIG_OF_EMBED=y
>
> this gives now a build warning
>
> ===================== WARNING ======================
> CONFIG_OF_EMBED is enabled. This option should only
> be used for debugging purposes. Please use
> CONFIG_OF_SEPARATE for boards in mainline.
> See doc/README.fdt-control for more info.
> ====================================================

I did not get this warning. For now I base my series on v2018.11,
should I base it on v2019.01-rc1 (i didn't realized it was already
released) ?

>
>
> Shall I change it when applying or do you want to test it first and send
> a follow-up patch?

I'd like to test it to be sure it continue to work.

Thanks,

Gregory

>
>> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>> +CONFIG_NET_RANDOM_ETHADDR=y
>> +CONFIG_CLK=y
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DM_SPI_FLASH=y
>> +CONFIG_SPI_FLASH=y
>> +CONFIG_SPI_FLASH_BAR=y
>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>> +CONFIG_SPI_FLASH_MACRONIX=y
>> +CONFIG_SPI_FLASH_SPANSION=y
>> +CONFIG_SPI_FLASH_STMICRO=y
>> +CONFIG_SPI_FLASH_WINBOND=y
>> +CONFIG_SPI_FLASH_MTD=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_PINCONF=y
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_DEBUG_UART_SHIFT=2
>> +CONFIG_SYS_NS16550=y
>> +CONFIG_SPI=y
>> +CONFIG_DM_SPI=y
>> +CONFIG_SOFT_SPI=y
>> +CONFIG_LZMA=y
>> +CONFIG_XZ=y
>> 
>
> -- 
> - Daniel

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com