[U-Boot] [PATCH 1/2] Kconfig: Add entry for VF610 NAND NFC device tree aware driver

[Stefan Agner]

On 03.12.2018 10:24, Lukasz Majewski wrote:
> This commit provides code to add proper entry to Kconfig to enable
> support for VF610 device tree aware driver.

Looks like a start, but ideally we should also move all the board/system
specific properties to device-tree (e.g.
CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES).

--
Stefan

> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> 
> ---
> 
>  drivers/mtd/nand/raw/Kconfig | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 008f7b4b4b..fd1723feda 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -88,6 +88,15 @@ config NAND_VF610_NFC
>  	  The driver supports a maximum 2k page size. The driver
>  	  currently does not support hardware ECC.
>  
> +if NAND_VF610_NFC
> +
> +config NAND_VF610_NFC_DT
> +        bool "Support Vybrid's vf610 NAND controller as a DT device"
> +        depends on OF_CONTROL && MTD
> +        help
> +          Enable the driver for Vybrid's vf610 NAND flash on platforms
> +	  using device tree.
> +
>  choice
>  	prompt "Hardware ECC strength"
>  	depends on NAND_VF610_NFC
> @@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES
>  
>  endchoice
>  
> +endif
> +
>  config NAND_PXA3XX
>  	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
>  	select SYS_NAND_SELF_INIT