[U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"

[Jagan Teki]

On Tue, Dec 18, 2018 at 6:02 PM Karl Palsson <karlp at tweak.net.au> wrote:
>
>
> Jagan Teki <jagan at amarulasolutions.com> wrote:
> > On Tue, Dec 18, 2018 at 4:09 PM <karlp at tweak.net.au> wrote:
> > >
> > > From: Karl Palsson <karlp at tweak.net.au>
> > >
> > > This reverts commit a8011eb84dfac5187cebf00ed8bc981bdb5c1fa1
> > >
> > > This causes DRAM init failures on (at least)
> > > * allwinner h3 nanopi-duo2
> > > * allwinner h2+ orangepi zero v1.1
> > >
> > > Signed-off-by: Karl Palsson <karlp at tweak.net.au>
> > > ---
> > >
> > > Ideally, this should get into 2019.01, so that this release is not
> > > broken on those targets.
> >
> > Better to understand the issue here, since I have BPI-M2+ which
> > boots fine w/o this revert.
>
> Fine with me, I posted about it as a "please look into this" a
> week ago, but sending a revert draws more attention it seems :) I

It's 4 days before, "U-Boot] sunxi: regression in dram init for h3 board"

7 days is not 4-days :)

I would expect some debugging on this during these days and find the
real root cause.

> only have a duo2 to test with for h3/h2+ devices, (plaes
> confirmed on the orangepi zero) but it's 100% works/doesn't work
> before/after this commit for me, not a question of reliability or
> "fails sometimes"

BPI-M2+ is H3 board.