[U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK

Marek Vasut marex at denx.de
Sun Dec 30 15:54:05 UTC 2018


On 12/30/18 9:13 AM, tien.fong.chee at intel.com wrote:
> From: Marek Vasut <marex at denx.de>
> 
> Update the default configuration file to enable the necessary functionality
> the get the kit working. That includes SPL SD/MMC support, USB, and I2C.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>

Is this patch needed ? Why ? This enables a whole lot of stuff ....

> ---
>  configs/socfpga_arria10_defconfig |   38 +++++++++++++++++++++++++++++++-----
>  1 files changed, 32 insertions(+), 6 deletions(-)
> 
> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
> index 8158dbb..4b93321 100644
> --- a/configs/socfpga_arria10_defconfig
> +++ b/configs/socfpga_arria10_defconfig
> @@ -1,7 +1,7 @@
>  CONFIG_ARM=y
>  CONFIG_ARCH_SOCFPGA=y
>  CONFIG_SYS_TEXT_BASE=0x01000040
> -CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_MALLOC_F_LEN=0x8000
>  CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
>  CONFIG_SPL=y
>  CONFIG_IDENT_STRING="socfpga_arria10"
> @@ -10,26 +10,35 @@ CONFIG_NR_DRAM_BANKS=1
>  CONFIG_USE_BOOTARGS=y
>  CONFIG_BOOTARGS="console=ttyS0,115200"
>  # CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
>  CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
> +CONFIG_VERSION_VARIABLE=y
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
>  CONFIG_SPL_FPGA_SUPPORT=y
> -CONFIG_SPL_SPI_LOAD=y
>  CONFIG_CMD_ASKENV=y
>  CONFIG_CMD_GREPENV=y
> +CONFIG_CMD_DFU=y
>  # CONFIG_CMD_FLASH is not set
>  CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_EXT4_WRITE=y
>  CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
> -# CONFIG_SPL_DOS_PARTITION is not set
> -# CONFIG_ISO_PARTITION is not set
> -# CONFIG_EFI_PARTITION is not set
> +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
>  CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
>  CONFIG_ENV_IS_IN_MMC=y
>  CONFIG_SPL_ENV_SUPPORT=y
>  CONFIG_SPL_DM=y
>  CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_DFU_MMC=y
>  CONFIG_SPL_DM_MMC=y
>  CONFIG_SPL_MMC_SUPPORT=y
>  CONFIG_SPL_EXT_SUPPORT=y
> @@ -40,13 +49,30 @@ CONFIG_FS_LOADER=y
>  CONFIG_FPGA_SOCFPGA=y
>  CONFIG_DM_GPIO=y
>  CONFIG_DWAPB_GPIO=y
> +CONFIG_SYS_I2C_DW=y
>  CONFIG_DM_MMC=y
>  CONFIG_MTD_DEVICE=y
> +CONFIG_MTD_PARTITIONS=y
> +CONFIG_MMC_DW=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
>  CONFIG_DM_ETH=y
>  CONFIG_ETH_DESIGNWARE=y
>  CONFIG_MII=y
> +CONFIG_SYS_NS16550=y
>  CONFIG_SPI=y
>  CONFIG_TIMER=y
>  CONFIG_SPL_TIMER=y
>  CONFIG_DESIGNWARE_APB_TIMER=y
> -CONFIG_USE_TINY_PRINTF=y
> +CONFIG_DESIGNWARE_SPI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list