[U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
frank-w at public-files.de
Thu Dec 20 17:43:02 UTC 2018
Hi,
fixed now this way (maybe not the best way...because now stringlists (multiple strings divided by \0) cannot displayed):
index 41b1665926..780c3d67b0 100644
--- a/cmd/strings.c
+++ b/cmd/strings.c
@@ -20,18 +20,28 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if ((flag & CMD_FLAG_REPEAT) == 0) {
start_addr = (char *)simple_strtoul(argv[1], NULL, 16);
if (argc > 2)
- last_addr = (char *)simple_strtoul(argv[2], NULL, 16);
+ last_addr = (char *)(start_addr + simple_strtoul(argv[2], NULL, 16)-1);
else
last_addr = (char *)-1;
+ printf("%p - %p",start_addr,last_addr);
}
char *addr = start_addr;
- do {
- puts(addr);
- puts("\n");
- addr += strlen(addr) + 1;
- } while (addr[0] && addr < last_addr);
+ if (argc>2)
+ {
+ do {
+ putc((int)addr[0]);
+ addr++;
+ } while (addr[0] && addr < last_addr);
+ }else {
+ do {
+ puts(addr);
+ puts("\n");
+ addr += strlen(addr) + 1;
+ } while (addr[0] && addr < last_addr);
+ }
+ puts("\n");
last_addr = addr + (last_addr - start_addr);
start_addr = addr;
results in:
U-Boot> tftp ${loadaddr} 192.168.0.10:files.lst
Using ethernet at 1b100000 device
TFTP from server 192.168.0.10; our IP address is 192.168.0.11
Filename 'files.lst'.
Load address: 0x80200000
Loading: #
86.9 KiB/s
done
Bytes transferred = 89 (59 hex)
U-Boot> strings ${loadaddr} ${filesize}
80200000 - 80200058uImage_4.14.73
uImage_4.14-rd
uImage_4.18.11
uImage_4.19.0-main
uImage_4.19.0-rc1-hdmiv5
U-Boot>
maybe you have a better idea
regards Frank
> Gesendet: Donnerstag, 20. Dezember 2018 um 17:33 Uhr
> Von: "Frank Wunderlich" <frank-w at public-files.de>
> An: "Simon Goldschmidt" <simon.k.r.goldschmidt at gmail.com>
> Cc: u-boot at lists.denx.de
> Betreff: Re: [U-Boot] list files on tftp / large kernel-image
>
> Hi,
>
> after mt7623 ethernet-driver is available for uboot-upstream i tested this again with it and this happens:
>
> U-Boot> tftp ${loadaddr} 192.168.0.10:files.lst
> Using ethernet at 1b100000 device
> TFTP from server 192.168.0.10; our IP address is 192.168.0.11
> Filename 'files.lst'.
> Load address: 0x80200000
> Loading: #
> 43 KiB/s
> done
> Bytes transferred = 89 (59 hex)
> U-Boot> echo ${filesize}
> 59
> U-Boot> strings ${loadaddr} ${filesize}
> uImage_4.14.73
> uImage_4.14-rd
> uImage_4.18.11
> uImage_4.19.0-main
> uImage_4.19.0-rc1-hdmiv5
> ����������������o�������W���������������~�����移�����e����9�w���������߿���������ںmr����m�\��������������������鯿��ϯV��������������������������������c��_����������....
>
> [16:58] frank at bpi-r2-e:/var/lib/tftp$ cat files.lst
> uImage_4.14.73
> uImage_4.14-rd
> uImage_4.18.11
> uImage_4.19.0-main
> uImage_4.19.0-rc1-hdmiv5
> [16:58] frank at bpi-r2-e:/var/lib/tftp$ ls -lh files.lst
> -rw-r--r-- 1 frank frank 89 Dez 2 16:18 files.lst
>
> so it seems strings does not stop after bytes-parameter
>
> U-Boot> help strings
> strings - display strings
>
> Usage:
> strings <addr> [byte count]
> - display strings at <addr> for at least [byte count] or first double NUL
> U-Boot>
>
> so it should stop after 0x59 bytes...but it does not :( looks like a bug for me.
>
> i do not fully understand cmd/strings.c
>
> http://git.denx.de/?p=u-boot.git;a=blob;f=cmd/strings.c
>
> especially flag CMD_FLAG_REPEAT
> last_addr is treated as hex of argv[2] this seems correct, but it is used as address and not as count
>
> tried to fix it this way:
>
> last_addr = (char *)(start_addr + simple_strtoul(argv[2], NULL, 16)-1);
>
> but same
>
> added a printf for checking calculation:
>
> printf("%p - %p",start_addr,last_addr);
>
> prints correctly
> 80200000 - 80200058
>
> so it looks like the bug is inside the loop...
>
> http://www.cplusplus.com/reference/cstdio/puts/
>
> says puts waits prints till \0 so i guess this is missing in my case so i did a memory display:
>
> U-Boot> md 0x80200000
> 80200000: 616d4975 345f6567 2e34312e 750a3337 uImage_4.14.73.u
> 80200010: 67616d49 2e345f65 722d3431 49750a64 Image_4.14-rd.uI
> 80200020: 6567616d 312e345f 31312e38 6d49750a mage_4.18.11.uIm
> 80200030: 5f656761 39312e34 6d2d302e 0a6e6961 age_4.19.0-main.
> 80200040: 616d4975 345f6567 2e39312e 63722d30 uImage_4.19.0-rc
> 80200050: 64682d31 3576696d ffffff0a fcffbff7 1-hdmiv5........
>
> memory at "fileend" is ff instead of 00
>
> i tried setting this to 0
>
> U-Boot> mw 0x80200059 00
>
> but this resets my board...any idea?
>
> regards Frank
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
More information about the U-Boot
mailing list