[U-Boot] [PATCH] cmd: i2c: Fix help output of i2c command.

[Christoph Muellner]

In case SYS_I2C or DM_I2C are defined, then the "i2c " prefix
of the "i2c crc32" command is missing.
This patch addresses this, so that users can't get confused
by the "crc32" command.

Without the patch we get

    => i2c help
    i2c - I2C sub-system

    Usage:
    i2c bus [muxtype:muxaddr:muxchannel] - show I2C bus info
    crc32 chip address[.0, .1, .2] count - compute CRC32 checksum
    i2c dev [dev] - show or set current I2C bus
    [...]

With the patch we get

    => i2c help
    i2c - I2C sub-system

    Usage:
    i2c bus [muxtype:muxaddr:muxchannel] - show I2C bus info
    i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum
    i2c dev [dev] - show or set current I2C bus
    ...

Signed-off-by: Christoph Muellner <christoph.muellner at theobroma-systems.com>
---
 cmd/i2c.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/cmd/i2c.c b/cmd/i2c.c
index 56df8eb3bca..09c4ba9a1c7 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -2023,6 +2023,7 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 static char i2c_help_text[] =
 #if defined(CONFIG_SYS_I2C) || defined(CONFIG_DM_I2C)
 	"bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
+	"i2c " /* That's the prefix for the crc32 command below. */
 #endif
 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
 #if defined(CONFIG_SYS_I2C) || \
-- 
2.11.0