[U-Boot] [PATCH v3 2/5] mmc: Add JZ47xx SD/MMC controller driver

Ezequiel Garcia ezequiel at collabora.com
Sun Dec 16 22:25:20 UTC 2018


From: Paul Burton <paul.burton at imgtec.com>

Add driver for the JZ47xx MSC controller.

Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
Signed-off-by: Paul Burton <paul.burton at imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
---
 drivers/mmc/Kconfig  |   6 +
 drivers/mmc/Makefile |   1 +
 drivers/mmc/jz_mmc.  |   0
 drivers/mmc/jz_mmc.c | 489 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 496 insertions(+)
 create mode 100644 drivers/mmc/jz_mmc.
 create mode 100644 drivers/mmc/jz_mmc.c

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index fbd13964a084..496b2cba6405 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -332,6 +332,12 @@ config MMC_BCM2835
 
 	  If unsure, say N.
 
+config JZ47XX_MMC
+	bool "Ingenic JZ47xx SD/MMC Host Controller support"
+	depends on ARCH_JZ47XX
+	help
+	  This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
+
 config MMC_SANDBOX
 	bool "Sandbox MMC support"
 	depends on SANDBOX
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 801a26d82192..7892c468f05c 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_MMC_SANDBOX)		+= sandbox_mmc.o
 obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 obj-$(CONFIG_SH_SDHI) += sh_sdhi.o
 obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o
+obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
 
 # SDHCI
 obj-$(CONFIG_MMC_SDHCI)			+= sdhci.o
diff --git a/drivers/mmc/jz_mmc. b/drivers/mmc/jz_mmc.
new file mode 100644
index 000000000000..e69de29bb2d1
diff --git a/drivers/mmc/jz_mmc.c b/drivers/mmc/jz_mmc.c
new file mode 100644
index 000000000000..2e92fa16e6c8
--- /dev/null
+++ b/drivers/mmc/jz_mmc.c
@@ -0,0 +1,489 @@
+/*
+ * Ingenic JZ MMC driver
+ *
+ * Copyright (c) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton at imgtec.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+#include <errno.h>
+#include <mach/jz4780.h>
+#include <wait_bit.h>
+
+/* Registers */
+#define MSC_STRPCL			0x000
+#define MSC_STAT			0x004
+#define MSC_CLKRT			0x008
+#define MSC_CMDAT			0x00c
+#define MSC_RESTO			0x010
+#define MSC_RDTO			0x014
+#define MSC_BLKLEN			0x018
+#define MSC_NOB				0x01c
+#define MSC_SNOB			0x020
+#define MSC_IMASK			0x024
+#define MSC_IREG			0x028
+#define MSC_CMD				0x02c
+#define MSC_ARG				0x030
+#define MSC_RES				0x034
+#define MSC_RXFIFO			0x038
+#define MSC_TXFIFO			0x03c
+#define MSC_LPM				0x040
+#define MSC_DMAC			0x044
+#define MSC_DMANDA			0x048
+#define MSC_DMADA			0x04c
+#define MSC_DMALEN			0x050
+#define MSC_DMACMD			0x054
+#define MSC_CTRL2			0x058
+#define MSC_RTCNT			0x05c
+#define MSC_DBG				0x0fc
+
+/* MSC Clock and Control Register (MSC_STRPCL) */
+#define MSC_STRPCL_EXIT_MULTIPLE	BIT(7)
+#define MSC_STRPCL_EXIT_TRANSFER	BIT(6)
+#define MSC_STRPCL_START_READWAIT	BIT(5)
+#define MSC_STRPCL_STOP_READWAIT	BIT(4)
+#define MSC_STRPCL_RESET		BIT(3)
+#define MSC_STRPCL_START_OP		BIT(2)
+#define MSC_STRPCL_CLOCK_CONTROL_STOP	BIT(0)
+#define MSC_STRPCL_CLOCK_CONTROL_START	BIT(1)
+
+/* MSC Status Register (MSC_STAT) */
+#define MSC_STAT_AUTO_CMD_DONE		BIT(31)
+#define MSC_STAT_IS_RESETTING		BIT(15)
+#define MSC_STAT_SDIO_INT_ACTIVE	BIT(14)
+#define MSC_STAT_PRG_DONE		BIT(13)
+#define MSC_STAT_DATA_TRAN_DONE		BIT(12)
+#define MSC_STAT_END_CMD_RES		BIT(11)
+#define MSC_STAT_DATA_FIFO_AFULL	BIT(10)
+#define MSC_STAT_IS_READWAIT		BIT(9)
+#define MSC_STAT_CLK_EN			BIT(8)
+#define MSC_STAT_DATA_FIFO_FULL		BIT(7)
+#define MSC_STAT_DATA_FIFO_EMPTY	BIT(6)
+#define MSC_STAT_CRC_RES_ERR		BIT(5)
+#define MSC_STAT_CRC_READ_ERROR		BIT(4)
+#define MSC_STAT_CRC_WRITE_ERROR	BIT(2)
+#define MSC_STAT_CRC_WRITE_ERROR_NOSTS	BIT(4)
+#define MSC_STAT_TIME_OUT_RES		BIT(1)
+#define MSC_STAT_TIME_OUT_READ		BIT(0)
+
+/* MSC Bus Clock Control Register (MSC_CLKRT) */
+#define MSC_CLKRT_CLK_RATE_MASK		0x7
+
+/* MSC Command Sequence Control Register (MSC_CMDAT) */
+#define MSC_CMDAT_IO_ABORT		BIT(11)
+#define MSC_CMDAT_BUS_WIDTH_1BIT	(0x0 << 9)
+#define MSC_CMDAT_BUS_WIDTH_4BIT	(0x2 << 9)
+#define MSC_CMDAT_DMA_EN		BIT(8)
+#define MSC_CMDAT_INIT			BIT(7)
+#define MSC_CMDAT_BUSY			BIT(6)
+#define MSC_CMDAT_STREAM_BLOCK		BIT(5)
+#define MSC_CMDAT_WRITE			BIT(4)
+#define MSC_CMDAT_DATA_EN		BIT(3)
+#define MSC_CMDAT_RESPONSE_MASK		(0x7 << 0)
+#define MSC_CMDAT_RESPONSE_NONE		(0x0 << 0) /* No response */
+#define MSC_CMDAT_RESPONSE_R1		(0x1 << 0) /* Format R1 and R1b */
+#define MSC_CMDAT_RESPONSE_R2		(0x2 << 0) /* Format R2 */
+#define MSC_CMDAT_RESPONSE_R3		(0x3 << 0) /* Format R3 */
+#define MSC_CMDAT_RESPONSE_R4		(0x4 << 0) /* Format R4 */
+#define MSC_CMDAT_RESPONSE_R5		(0x5 << 0) /* Format R5 */
+#define MSC_CMDAT_RESPONSE_R6		(0x6 << 0) /* Format R6 */
+
+/* MSC Interrupts Mask Register (MSC_IMASK) */
+#define MSC_IMASK_TIME_OUT_RES		BIT(9)
+#define MSC_IMASK_TIME_OUT_READ		BIT(8)
+#define MSC_IMASK_SDIO			BIT(7)
+#define MSC_IMASK_TXFIFO_WR_REQ		BIT(6)
+#define MSC_IMASK_RXFIFO_RD_REQ		BIT(5)
+#define MSC_IMASK_END_CMD_RES		BIT(2)
+#define MSC_IMASK_PRG_DONE		BIT(1)
+#define MSC_IMASK_DATA_TRAN_DONE	BIT(0)
+
+/* MSC Interrupts Status Register (MSC_IREG) */
+#define MSC_IREG_TIME_OUT_RES		BIT(9)
+#define MSC_IREG_TIME_OUT_READ		BIT(8)
+#define MSC_IREG_SDIO			BIT(7)
+#define MSC_IREG_TXFIFO_WR_REQ		BIT(6)
+#define MSC_IREG_RXFIFO_RD_REQ		BIT(5)
+#define MSC_IREG_END_CMD_RES		BIT(2)
+#define MSC_IREG_PRG_DONE		BIT(1)
+#define MSC_IREG_DATA_TRAN_DONE		BIT(0)
+
+struct jz_mmc_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
+};
+
+struct jz_mmc_priv {
+	void __iomem		*regs;
+	u32			flags;
+/* priv flags */
+#define JZ_MMC_BUS_WIDTH_MASK	0x3
+#define JZ_MMC_BUS_WIDTH_1	0x0
+#define JZ_MMC_BUS_WIDTH_4	0x2
+#define JZ_MMC_BUS_WIDTH_8	0x3
+#define JZ_MMC_SENT_INIT	BIT(2)
+};
+
+static int jz_mmc_clock_rate(void)
+{
+	return 24000000;
+}
+
+static int jz_mmc_send_cmd(struct mmc *mmc, struct jz_mmc_priv *priv,
+			   struct mmc_cmd *cmd, struct mmc_data *data)
+{
+	u32 stat, mask, cmdat = 0;
+	int i, ret;
+
+	/* stop the clock */
+	writel(MSC_STRPCL_CLOCK_CONTROL_STOP, priv->regs + MSC_STRPCL);
+	ret = wait_for_bit_le32(priv->regs + MSC_STAT,
+				MSC_STAT_CLK_EN, false, 10000, false);
+	if (ret)
+		return ret;
+
+	writel(0, priv->regs + MSC_DMAC);
+
+	/* setup command */
+	writel(cmd->cmdidx, priv->regs + MSC_CMD);
+	writel(cmd->cmdarg, priv->regs + MSC_ARG);
+
+	if (data) {
+		/* setup data */
+		cmdat |= MSC_CMDAT_DATA_EN;
+		if (data->flags & MMC_DATA_WRITE)
+			cmdat |= MSC_CMDAT_WRITE;
+
+		writel(data->blocks, priv->regs + MSC_NOB);
+		writel(data->blocksize, priv->regs + MSC_BLKLEN);
+	} else {
+		writel(0, priv->regs + MSC_NOB);
+		writel(0, priv->regs + MSC_BLKLEN);
+	}
+
+	/* setup response */
+	switch (cmd->resp_type) {
+	case MMC_RSP_NONE:
+		break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R1b:
+		cmdat |= MSC_CMDAT_RESPONSE_R1;
+		break;
+	case MMC_RSP_R2:
+		cmdat |= MSC_CMDAT_RESPONSE_R2;
+		break;
+	case MMC_RSP_R3:
+		cmdat |= MSC_CMDAT_RESPONSE_R3;
+		break;
+	default:
+		break;
+	}
+
+	if (cmd->resp_type & MMC_RSP_BUSY)
+		cmdat |= MSC_CMDAT_BUSY;
+
+	/* set init for the first command only */
+	if (!(priv->flags & JZ_MMC_SENT_INIT)) {
+		cmdat |= MSC_CMDAT_INIT;
+		priv->flags |= JZ_MMC_SENT_INIT;
+	}
+
+	cmdat |= (priv->flags & JZ_MMC_BUS_WIDTH_MASK) << 9;
+
+	/* write the data setup */
+	writel(cmdat, priv->regs + MSC_CMDAT);
+
+	/* unmask interrupts */
+	mask = 0xffffffff & ~(MSC_IMASK_END_CMD_RES | MSC_IMASK_TIME_OUT_RES);
+	if (data) {
+		mask &= ~MSC_IMASK_DATA_TRAN_DONE;
+		if (data->flags & MMC_DATA_WRITE) {
+			mask &= ~MSC_IMASK_TXFIFO_WR_REQ;
+		} else {
+			mask &= ~(MSC_IMASK_RXFIFO_RD_REQ |
+				  MSC_IMASK_TIME_OUT_READ);
+		}
+	}
+	writel(mask, priv->regs + MSC_IMASK);
+
+	/* clear interrupts */
+	writel(0xffffffff, priv->regs + MSC_IREG);
+
+	/* start the command (& the clock) */
+	writel(MSC_STRPCL_START_OP | MSC_STRPCL_CLOCK_CONTROL_START,
+	       priv->regs + MSC_STRPCL);
+
+	/* wait for completion */
+	for (i = 0; i < 100; i++) {
+		stat = readl(priv->regs + MSC_IREG);
+		stat &= MSC_IREG_END_CMD_RES | MSC_IREG_TIME_OUT_RES;
+		if (stat)
+			break;
+		mdelay(1);
+	}
+	writel(stat, priv->regs + MSC_IREG);
+	if (stat & MSC_IREG_TIME_OUT_RES)
+		return -ETIMEDOUT;
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		/* read the response */
+		if (cmd->resp_type & MMC_RSP_136) {
+			u16 a, b, c, i;
+
+			a = readw(priv->regs + MSC_RES);
+			for (i = 0; i < 4; i++) {
+				b = readw(priv->regs + MSC_RES);
+				c = readw(priv->regs + MSC_RES);
+				cmd->response[i] =
+					(a << 24) | (b << 8) | (c >> 8);
+				a = c;
+			}
+		} else {
+			cmd->response[0] = readw(priv->regs + MSC_RES) << 24;
+			cmd->response[0] |= readw(priv->regs + MSC_RES) << 8;
+			cmd->response[0] |= readw(priv->regs + MSC_RES) & 0xff;
+		}
+	}
+
+	if (data && (data->flags & MMC_DATA_WRITE)) {
+		/* write the data */
+		int sz = DIV_ROUND_UP(data->blocks * data->blocksize, 4);
+		const void *buf = data->src;
+
+		while (sz--) {
+			u32 val = get_unaligned_le32(buf);
+
+			wait_for_bit_le32(priv->regs + MSC_IREG,
+					  MSC_IREG_TXFIFO_WR_REQ,
+					  true, 10000, false);
+			writel(val, priv->regs + MSC_TXFIFO);
+			buf += 4;
+		}
+	} else if (data && (data->flags & MMC_DATA_READ)) {
+		/* read the data */
+		int sz = data->blocks * data->blocksize;
+		void *buf = data->dest;
+
+		do {
+			stat = readl(priv->regs + MSC_STAT);
+
+			if (stat & MSC_STAT_TIME_OUT_READ)
+				return -ETIMEDOUT;
+			if (stat & MSC_STAT_CRC_READ_ERROR)
+				return -EINVAL;
+			if (stat & MSC_STAT_DATA_FIFO_EMPTY) {
+				udelay(10);
+				continue;
+			}
+			do {
+				u32 val = readl(priv->regs + MSC_RXFIFO);
+
+				if (sz == 1)
+					*(u8 *)buf = (u8)val;
+				else if (sz == 2)
+					put_unaligned_le16(val, buf);
+				else if (sz >= 4)
+					put_unaligned_le32(val, buf);
+				buf += 4;
+				sz -= 4;
+				stat = readl(priv->regs + MSC_STAT);
+			} while (!(stat & MSC_STAT_DATA_FIFO_EMPTY));
+		} while (!(stat & MSC_STAT_DATA_TRAN_DONE));
+	}
+
+	return 0;
+}
+
+static int jz_mmc_set_ios(struct mmc *mmc, struct jz_mmc_priv *priv)
+{
+	u32 real_rate = jz_mmc_clock_rate();
+	u8 clk_div = 0;
+
+	/* calculate clock divide */
+	while ((real_rate > mmc->clock) && (clk_div < 7)) {
+		real_rate >>= 1;
+		clk_div++;
+	}
+	writel(clk_div & MSC_CLKRT_CLK_RATE_MASK, priv->regs + MSC_CLKRT);
+
+	/* set the bus width for the next command */
+	priv->flags &= ~JZ_MMC_BUS_WIDTH_MASK;
+	if (mmc->bus_width == 8)
+		priv->flags |= JZ_MMC_BUS_WIDTH_8;
+	else if (mmc->bus_width == 4)
+		priv->flags |= JZ_MMC_BUS_WIDTH_4;
+	else
+		priv->flags |= JZ_MMC_BUS_WIDTH_1;
+
+	return 0;
+}
+
+static int jz_mmc_core_init(struct mmc *mmc)
+{
+	struct jz_mmc_priv *priv = mmc->priv;
+	int ret;
+
+	/* Reset */
+	writel(MSC_STRPCL_RESET, priv->regs + MSC_STRPCL);
+	ret = wait_for_bit_le32(priv->regs + MSC_STAT,
+				MSC_STAT_IS_RESETTING, false, 10000, false);
+	if (ret)
+		return ret;
+
+	/* Maximum timeouts */
+	writel(0xffff, priv->regs + MSC_RESTO);
+	writel(0xffffffff, priv->regs + MSC_RDTO);
+
+	/* Enable low power mode */
+	writel(0x1, priv->regs + MSC_LPM);
+
+	return 0;
+}
+
+#if !CONFIG_IS_ENABLED(DM_MMC)
+
+static int jz_mmc_legacy_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+				  struct mmc_data *data)
+{
+	struct jz_mmc_priv *priv = mmc->priv;
+
+	return jz_mmc_send_cmd(mmc, priv, cmd, data);
+}
+
+static int jz_mmc_legacy_set_ios(struct mmc *mmc)
+{
+	struct jz_mmc_priv *priv = mmc->priv;
+
+	return jz_mmc_set_ios(mmc, priv);
+};
+
+static const struct mmc_ops jz_msc_ops = {
+	.send_cmd	= jz_mmc_legacy_send_cmd,
+	.set_ios	= jz_mmc_legacy_set_ios,
+	.init		= jz_mmc_core_init,
+};
+
+static struct jz_mmc_priv jz_mmc_priv_static;
+static struct jz_mmc_plat jz_mmc_plat_static = {
+	.cfg = {
+		.name = "MSC",
+		.ops = &jz_msc_ops,
+
+		.voltages = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 |
+			    MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+			    MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36,
+		.host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS,
+
+		.f_min = 375000,
+		.f_max = 48000000,
+		.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
+	},
+};
+
+int jz_mmc_init(void __iomem *base)
+{
+	struct mmc *mmc;
+
+	jz_mmc_priv_static.regs = base;
+
+	mmc = mmc_create(&jz_mmc_plat_static.cfg, &jz_mmc_priv_static);
+
+	return mmc ? 0 : -ENODEV;
+}
+
+#else /* CONFIG_DM_MMC */
+
+#include <dm.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+static int jz_mmc_dm_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
+			      struct mmc_data *data)
+{
+	struct jz_mmc_priv *priv = dev_get_priv(dev);
+	struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+	return jz_mmc_send_cmd(mmc, priv, cmd, data);
+}
+
+static int jz_mmc_dm_set_ios(struct udevice *dev)
+{
+	struct jz_mmc_priv *priv = dev_get_priv(dev);
+	struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+	return jz_mmc_set_ios(mmc, priv);
+};
+
+static const struct dm_mmc_ops jz_msc_ops = {
+	.send_cmd	= jz_mmc_dm_send_cmd,
+	.set_ios	= jz_mmc_dm_set_ios,
+};
+
+static int jz_mmc_ofdata_to_platdata(struct udevice *dev)
+{
+	struct jz_mmc_priv *priv = dev_get_priv(dev);
+	struct jz_mmc_plat *plat = dev_get_platdata(dev);
+	struct mmc_config *cfg;
+	int ret;
+
+	priv->regs = map_physmem(devfdt_get_addr(dev), 0x100, MAP_NOCACHE);
+	cfg = &plat->cfg;
+
+	cfg->name = "MSC";
+	cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	ret = mmc_of_parse(dev, cfg);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse host caps\n");
+		return ret;
+	}
+
+	cfg->f_min = 400000;
+	cfg->f_max = 52000000;
+
+	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+	return 0;
+}
+
+static int jz_mmc_bind(struct udevice *dev)
+{
+	struct jz_mmc_plat *plat = dev_get_platdata(dev);
+
+	return mmc_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static int jz_mmc_probe(struct udevice *dev)
+{
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct jz_mmc_priv *priv = dev_get_priv(dev);
+	struct jz_mmc_plat *plat = dev_get_platdata(dev);
+
+	plat->mmc.priv = priv;
+	upriv->mmc = &plat->mmc;
+	return jz_mmc_core_init(&plat->mmc);
+}
+
+static const struct udevice_id jz_mmc_ids[] = {
+	{ .compatible = "ingenic,jz4780-mmc" },
+	{ }
+};
+
+U_BOOT_DRIVER(jz_mmc_drv) = {
+	.name			= "jz_mmc",
+	.id			= UCLASS_MMC,
+	.of_match		= jz_mmc_ids,
+	.ofdata_to_platdata	= jz_mmc_ofdata_to_platdata,
+	.bind			= jz_mmc_bind,
+	.probe			= jz_mmc_probe,
+	.priv_auto_alloc_size	= sizeof(struct jz_mmc_priv),
+	.platdata_auto_alloc_size = sizeof(struct jz_mmc_plat),
+	.ops			= &jz_msc_ops,
+};
+#endif /* CONFIG_DM_MMC */
-- 
2.20.0



More information about the U-Boot mailing list