[U-Boot] [RFC PATCH v1 2/7] ARM: kirkwood: add db-88f6281-bp board

Chris Packham judge.packham at gmail.com
Mon Dec 17 08:35:24 UTC 2018 

This is Marvell's Kirkwood development board. It has the following
features

 - 512M DDR2
 - 2 PCI connectors
 - 1 x1 PCI-e interface
 - 1 Gigabit Ethernet Port
 - 2 SATA Ports
 - USB 2.0 Interface
 - SDIO
 - 128M NAND Flash
 - 16M SPI Flash

It can be strapped to boot from SPI or NAND.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 arch/arm/dts/kirkwood-db-88f6281-spi.dts    |  48 +++++++++
 arch/arm/dts/kirkwood-db-88f6281.dts        |  26 +++++
 arch/arm/dts/kirkwood-db.dtsi               |  94 +++++++++++++++++
 arch/arm/mach-kirkwood/Kconfig              |   4 +
 board/Marvell/db-88f6281-bp/Kconfig         |  12 +++
 board/Marvell/db-88f6281-bp/MAINTAINERS     |  10 ++
 board/Marvell/db-88f6281-bp/Makefile        |   3 +
 board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 103 +++++++++++++++++++
 board/Marvell/db-88f6281-bp/kwbimage.cfg    |  36 +++++++
 configs/db-88f6281-bp-spi_defconfig         |  54 ++++++++++
 configs/db-88f6281-bp_defconfig             |  53 ++++++++++
 include/configs/db-88f6281-bp.h             | 107 ++++++++++++++++++++
 12 files changed, 550 insertions(+)
 create mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts
 create mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts
 create mode 100644 arch/arm/dts/kirkwood-db.dtsi
 create mode 100644 board/Marvell/db-88f6281-bp/Kconfig
 create mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS
 create mode 100644 board/Marvell/db-88f6281-bp/Makefile
 create mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c
 create mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg
 create mode 100644 configs/db-88f6281-bp-spi_defconfig
 create mode 100644 configs/db-88f6281-bp_defconfig
 create mode 100644 include/configs/db-88f6281-bp.h

diff --git a/arch/arm/dts/kirkwood-db-88f6281-spi.dts b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
new file mode 100644
index 000000000000..50b1b0d4a535
--- /dev/null
+++ b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed at marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db-88f6281.dts"
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		mode = <0>;
+
+		partition at u-boot {
+			reg = <0x00000000 0x00c00000>;
+			label = "u-boot";
+		};
+		partition at u-boot-env {
+			reg = <0x00c00000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition at unused {
+			reg = <0x00100000 0x00f00000>;
+			label = "unused";
+		};
+	};
+};
+
+&nand {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/kirkwood-db-88f6281.dts b/arch/arm/dts/kirkwood-db-88f6281.dts
new file mode 100644
index 000000000000..2adb17c955aa
--- /dev/null
+++ b/arch/arm/dts/kirkwood-db-88f6281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed at marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/kirkwood-db.dtsi b/arch/arm/dts/kirkwood-db.dtsi
new file mode 100644
index 000000000000..b81d8e8298a3
--- /dev/null
+++ b/arch/arm/dts/kirkwood-db.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed at marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		spi0 = &spi0;
+	};
+
+	ocp at f1000000 {
+		pin-controller at 10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial at 12000 {
+			status = "okay";
+		};
+
+		sata at 80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci at 50000 {
+			status = "okay";
+		};
+
+		mvsdio at 90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition at 0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition at 100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition at 500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port at 0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3b860c4f55fe..7c4170399afb 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -65,6 +65,9 @@ config TARGET_SBx81LIFKW
 config TARGET_SBx81LIFXCAT
 	bool "Allied Telesis SBx81GP24/SBx81GT24"
 
+config TARGET_DB_88F6281_BP
+	bool "Marvell DB-88F6281-BP"
+
 endchoice
 
 config SYS_SOC
@@ -89,5 +92,6 @@ source "board/Seagate/nas220/Kconfig"
 source "board/zyxel/nsa310s/Kconfig"
 source "board/alliedtelesis/SBx81LIFKW/Kconfig"
 source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
+source "board/Marvell/db-88f6281-bp/Kconfig"
 
 endif
diff --git a/board/Marvell/db-88f6281-bp/Kconfig b/board/Marvell/db-88f6281-bp/Kconfig
new file mode 100644
index 000000000000..38467399e688
--- /dev/null
+++ b/board/Marvell/db-88f6281-bp/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_DB_88F6281_BP
+
+config SYS_BOARD
+	default "db-88f6281-bp"
+
+config SYS_VENDOR
+	default "Marvell"
+
+config SYS_CONFIG_NAME
+	default "db-88f6281-bp"
+
+endif
diff --git a/board/Marvell/db-88f6281-bp/MAINTAINERS b/board/Marvell/db-88f6281-bp/MAINTAINERS
new file mode 100644
index 000000000000..f31d3be70bae
--- /dev/null
+++ b/board/Marvell/db-88f6281-bp/MAINTAINERS
@@ -0,0 +1,10 @@
+DB_88F6820_AMC BOARD
+M:	Chris Packham <judge.packham at gmail.com>
+S:	Maintained
+F:	arch/arm/dts/kirkwood-db-88f6281.dts
+F:	arch/arm/dts/kirkwood-db-88f6281-spi.dts
+F:	arch/arm/dts/kirkwood-db.dtsi
+F:	board/Marvell/db-88f6281-bp/
+F:	include/configs/db-88f6281-bp.h
+F:	configs/db-88f6281-bp_defconfig
+F:	configs/db-88f6281-bp-spi_defconfig
diff --git a/board/Marvell/db-88f6281-bp/Makefile b/board/Marvell/db-88f6281-bp/Makefile
new file mode 100644
index 000000000000..38ff522ca1c8
--- /dev/null
+++ b/board/Marvell/db-88f6281-bp/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y	:= db-88f6281-bp.o
diff --git a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c b/board/Marvell/db-88f6281-bp/db-88f6281-bp.c
new file mode 100644
index 000000000000..b68f2f3c895b
--- /dev/null
+++ b/board/Marvell/db-88f6281-bp/db-88f6281-bp.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <linux/io.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+
+#define DB_88F6281_OE_LOW	~(BIT(7))
+#define DB_88F6281_OE_HIGH	~(BIT(15) | BIT(14) | BIT(13) | BIT(4))
+#define DB_88F6281_OE_VAL_LOW	BIT(7)
+#define DB_88F6281_OE_VAL_HIGH	0
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	mvebu_config_gpio(DB_88F6281_OE_VAL_LOW,
+			  DB_88F6281_OE_VAL_HIGH,
+			  DB_88F6281_OE_LOW, DB_88F6281_OE_HIGH);
+
+	/* Multi-Purpose Pins Functionality configuration */
+	static const u32 kwmpp_config[] = {
+#ifdef CONFIG_CMD_NAND
+		MPP0_NF_IO2,
+		MPP1_NF_IO3,
+		MPP2_NF_IO4,
+		MPP3_NF_IO5,
+#else
+		MPP0_SPI_SCn,
+		MPP1_SPI_MOSI,
+		MPP2_SPI_SCK,
+		MPP3_SPI_MISO,
+#endif
+		MPP4_NF_IO6,
+		MPP5_NF_IO7,
+		MPP6_SYSRST_OUTn,
+		MPP7_GPO,
+		MPP8_TW_SDA,
+		MPP9_TW_SCK,
+		MPP10_UART0_TXD,
+		MPP11_UART0_RXD,
+		MPP12_SD_CLK,
+		MPP13_SD_CMD,
+		MPP14_SD_D0,
+		MPP15_SD_D1,
+		MPP16_SD_D2,
+		MPP17_SD_D3,
+		MPP18_NF_IO0,
+		MPP19_NF_IO1,
+		MPP20_SATA1_ACTn,
+		MPP21_SATA0_ACTn,
+		MPP22_GPIO,
+		MPP23_GPIO,
+		MPP24_GPIO,
+		MPP25_GPIO,
+		MPP26_GPIO,
+		MPP27_GPIO,
+		MPP28_GPIO,
+		MPP29_GPIO,
+		MPP30_GPIO,
+		MPP31_GPIO,
+		MPP32_GPIO,
+		MPP33_GPIO,
+		MPP34_GPIO,
+		MPP35_GPIO,
+		MPP36_GPIO,
+		MPP37_GPIO,
+		MPP38_GPIO,
+		MPP39_GPIO,
+		MPP40_GPIO,
+		MPP41_GPIO,
+		MPP42_GPIO,
+		MPP43_GPIO,
+		MPP44_GPIO,
+		MPP45_GPIO,
+		MPP46_GPIO,
+		MPP47_GPIO,
+		MPP48_GPIO,
+		MPP49_GPIO,
+		0
+	};
+	kirkwood_mpp_conf(kwmpp_config, NULL);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* automatically defined by kirkwood config.h */
+void reset_phy(void)
+{
+}
+#endif
diff --git a/board/Marvell/db-88f6281-bp/kwbimage.cfg b/board/Marvell/db-88f6281-bp/kwbimage.cfg
new file mode 100644
index 000000000000..49a637078682
--- /dev/null
+++ b/board/Marvell/db-88f6281-bp/kwbimage.cfg
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+DATA 0xd00100e0 0x1b1b1b9b
+DATA 0xd0020134 0xbbbbbbbb
+DATA 0xd0020138 0x00bbbbbb
+DATA 0xd0020154 0x00000200
+DATA 0xd002014c 0x00001c00
+DATA 0xd0020148 0x00000001
+
+DATA 0xd0001400 0x43000c30
+DATA 0xd0001404 0x39543000
+DATA 0xd0001408 0x22125451
+DATA 0xd000140c 0x00000833
+DATA 0xd0001410 0x000000cc
+DATA 0xd0001414 0x00000000
+DATA 0xd0001418 0x00000000
+DATA 0xd000141c 0x00000c52
+DATA 0xd0001420 0x00000044
+DATA 0xd0001424 0x0000f1ff
+DATA 0xd0001428 0x00085520
+DATA 0xd000147c 0x00008552
+DATA 0xd0001504 0x0ffffff1
+DATA 0xd0001508 0x10000000
+DATA 0xd000150c 0x0ffffff5
+DATA 0xd0001514 0x00000000
+DATA 0xd000151c 0x00000000
+DATA 0xd0001494 0x84210000
+DATA 0xd0001498 0x00000000
+DATA 0xd000149c 0x0000f40f
+DATA 0xd0001480 0x00000001
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/configs/db-88f6281-bp-spi_defconfig b/configs/db-88f6281-bp-spi_defconfig
new file mode 100644
index 000000000000..93e125af5b2d
--- /dev/null
+++ b/configs/db-88f6281-bp-spi_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_DB_88F6281_BP=y
+CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP"
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_IDE=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_JFFS2=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
+CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281-spi"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_MVSATA_IDE=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_ETH=y
+CONFIG_MVGBE=y
+CONFIG_MII=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_MV=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
diff --git a/configs/db-88f6281-bp_defconfig b/configs/db-88f6281-bp_defconfig
new file mode 100644
index 000000000000..6360ef5e8280
--- /dev/null
+++ b/configs/db-88f6281-bp_defconfig
@@ -0,0 +1,53 @@
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_DB_88F6281_BP=y
+CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP"
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_IDE=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_JFFS2=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
+CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_MVSATA_IDE=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_ETH=y
+CONFIG_MVGBE=y
+CONFIG_MII=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_MV=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
diff --git a/include/configs/db-88f6281-bp.h b/include/configs/db-88f6281-bp.h
new file mode 100644
index 000000000000..e2da9fdacf29
--- /dev/null
+++ b/include/configs/db-88f6281-bp.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _CONFIG_DB_88F6281_BP_H
+#define _CONFIG_DB_88F6281_BP_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
+#define CONFIG_KW88F6281	1	/* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+#define CONFIG_SYS_TCLK		166666667
+#define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define CONFIG_BUILD_TARGET	"u-boot.kwb"
+
+/* additions for new ARM relocation support */
+#define CONFIG_SYS_SDRAM_BASE	0x00000000
+
+#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
+#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
+#define CONFIG_KIRKWOOD_GPIO	1
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
+
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
+
+/*
+ *  Environment variables configurations
+ */
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		20000000	/* 20Mhz */
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256K */
+#define CONFIG_ENV_SIZE			0x01000
+#define CONFIG_ENV_OFFSET		0xC0000
+
+/*
+ * U-Boot bootcode configuration
+ */
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for monitor */
+#define CONFIG_SYS_MALLOC_LEN		  (4 << 20)	/* Reserve 4.0 MB for malloc */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
+
+/* size in bytes reserved for initial data */
+
+#include <asm/arch/config.h>
+/* There is no PHY directly connected so don't ask it for link status */
+#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
+#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
+#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+
+/*
+ * SDIO/MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MVEBU_MMC
+#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
+#endif /* CONFIG_CMD_MMC */
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
+
+#define CONFIG_SYS_LOAD_ADDR  0x1000000      /* default location for tftp and bootm */
+
+#endif /* _CONFIG_DB_88F6281_BP_H */
-- 
2.19.2

More information about the U-Boot mailing list