[U-Boot] [PATCH 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR

[Peng Fan]

Introduce BL33_BASE_ADDR, then we could reuse this script for i.MX8QXP.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/mkimage_fit_atf.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh
index 77f7143263..38c9858e84 100755
--- a/arch/arm/mach-imx/mkimage_fit_atf.sh
+++ b/arch/arm/mach-imx/mkimage_fit_atf.sh
@@ -9,6 +9,7 @@
 [ -z "$BL31" ] && BL31="bl31.bin"
 [ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000"
 [ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000"
+[ -z "$BL33_LOAD_ADDR" ] && BL33_LOAD_ADDR="0x40200000"
 
 if [ ! -f $BL31 ]; then
 	echo "ERROR: BL31 file $BL31 NOT found" >&2
@@ -58,7 +59,7 @@ cat << __HEADER_EOF
 			type = "standalone";
 			arch = "arm64";
 			compression = "none";
-			load = <0x40200000>;
+			load = <$BL33_LOAD_ADDR>;
 		};
 		atf at 1 {
 			description = "ARM Trusted Firmware";
-- 
2.14.1