[U-Boot] [v2] arm64: lx2160ardb: enable DM support for sata

[Peng Ma]

Enable related configs to support sata DM feature.

Signed-off-by: Peng Ma <peng.ma at nxp.com>
---
Changed for v2:
	- used moveconfig.py -s -d to sync lx2160ardb_tfa_SECURE_BOOT_defconfig

 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 72 ++++++++------------
 1 file changed, 27 insertions(+), 45 deletions(-)

diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index b7e3967ad9..fc92959080 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -1,16 +1,19 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LX2160ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
+CONFIG_EMC2305=y
+CONFIG_SYS_FSPI_AHB_INIT=y
+CONFIG_FSPI_AHB_EN_4BYTE=y
+CONFIG_TFABOOT=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
 CONFIG_NR_DRAM_BANKS=3
-CONFIG_DM=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_TFABOOT=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 # CONFIG_USE_BOOTCOMMAND is not set
@@ -24,63 +27,42 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
-CONFIG_ENV_IS_NOWHERE=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM_SERIAL=y
-CONFIG_SERIAL_PROBE_ALL=y
-CONFIG_CONS_INDEX=0
-CONFIG_FSL_CAAM=y
+CONFIG_DM=y
+CONFIG_SATA_CEVA=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_MICRON=y
-CONFIG_SPI_FLASH_USE_4K_SECTORS=n
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_NXP_FSPI=y
-CONFIG_FSPI_AHB_EN_4BYTE=y
-CONFIG_SYS_FSPI_AHB_INIT=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
-CONFIG_NETDEVICES=y
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_PHY_CORTINA=y
+CONFIG_PHY_INPHI=y
+CONFIG_INPHI_25G=y
 CONFIG_PHY_GIGE=y
-CONFIG_CMD_NET=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_PXE=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_EXT2=y
+CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LX=y
-CONFIG_E1000=y
-CONFIG_NET=y
-CONFIG_DM_MMC=y
-CONFIG_DM_MMC_OPS=n
-CONFIG_BLK=n
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SERIAL_PROBE_ALL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SCSI=y
-# CONFIG_SYS_FSL_DDR_PHY is not set
-CONFIG_SYS_GEN2_DDR_PHY=y
-CONFIG_SYS_MALLOC_F=y
-CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_AQUANTIA=y
-CONFIG_PHY_CORTINA=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_INPHI=y
-CONFIG_INPHI_25G=y
-CONFIG_HUSH_PARSER=y
-CONFIG_EMC2305=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
-- 
2.17.1