[U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx High Security EVM with UART/USB Boot support

[Lokesh Vutla]

On 05/12/18 3:07 AM, Andrew F. Davis wrote:
> On 12/2/18 11:24 PM, Lokesh Vutla wrote:
>>
>>
>> On 30/11/18 10:41 PM, Andrew F. Davis wrote:
>>> Add a new defconfig file for the AM57xx High Security EVM. This config
>>> is specific for the case of UART/USB booting.
>>
>> Can you share the steps on how you verified uart boot?
>>
> 
> All the verification for this defconfig was with USB boot for the first
> stage (ULO). UART cannot be tested with our DRA7xx EVMs as you pointed
> out and to test on AM57xx special scrips need to be used as the ROM UART
> loading protocol is not standard. UART loading of the second stage is
> possible after loading the first stage using some other boot media.

okay, drop uart support from dra7xx hs defconfig. We should not confuse anyone 
looking at the commit description or code.

Thanks and regards,
Lokesh

> 
> On HS, both USB and UART are special in their load address requirements,
> this patch set fixes that. The UART support on HS cannot work with the
> old defconfig.
> 
> Andrew
> 
>> Thanks and regards,
>> Lokesh
>>
>>>
>>> Signed-off-by: Andrew F. Davis <afd at ti.com>
>>> ---
>>>    MAINTAINERS                          |  1 +
>>>    configs/am57xx_hs_evm_uart_defconfig | 92 ++++++++++++++++++++++++++++
>>>    2 files changed, 93 insertions(+)
>>>    create mode 100644 configs/am57xx_hs_evm_uart_defconfig
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index d0c208b93d..b7366cfc0a 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -647,6 +647,7 @@ F:    configs/am335x_hs_evm_defconfig
>>>    F:    configs/am335x_hs_evm_uart_defconfig
>>>    F:    configs/am43xx_hs_evm_defconfig
>>>    F:    configs/am57xx_hs_evm_defconfig
>>> +F:    configs/am57xx_hs_evm_uart_defconfig
>>>    F:    configs/dra7xx_hs_evm_defconfig
>>>    F:    configs/dra7xx_hs_evm_uart_defconfig
>>>    F:    configs/k2hk_hs_evm_defconfig
>>> diff --git a/configs/am57xx_hs_evm_uart_defconfig
>>> b/configs/am57xx_hs_evm_uart_defconfig
>>> new file mode 100644
>>> index 0000000000..a0c42387ec
>>> --- /dev/null
>>> +++ b/configs/am57xx_hs_evm_uart_defconfig
>>> @@ -0,0 +1,92 @@
>>> +CONFIG_ARM=y
>>> +CONFIG_ARCH_OMAP2PLUS=y
>>> +CONFIG_TI_SECURE_DEVICE=y
>>> +CONFIG_TI_COMMON_CMD_OPTIONS=y
>>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>>> +CONFIG_OMAP54XX=y
>>> +CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
>>> +CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
>>> +CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
>>> +CONFIG_ISW_ENTRY_ADDR=0x40306d50
>>> +CONFIG_TARGET_AM57XX_EVM=y
>>> +CONFIG_SPL=y
>>> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
>>> +CONFIG_SPL_SPI_SUPPORT=y
>>> +CONFIG_ARMV7_LPAE=y
>>> +CONFIG_DISTRO_DEFAULTS=y
>>> +CONFIG_NR_DRAM_BANKS=2
>>> +CONFIG_FIT_IMAGE_POST_PROCESS=y
>>> +CONFIG_SPL_LOAD_FIT=y
>>> +CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
>>> +CONFIG_OF_BOARD_SETUP=y
>>> +CONFIG_USE_BOOTARGS=y
>>> +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200
>>> androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
>>> +# CONFIG_USE_BOOTCOMMAND is not set
>>> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
>>> +# CONFIG_MISC_INIT_R is not set
>>> +CONFIG_VERSION_VARIABLE=y
>>> +CONFIG_BOARD_EARLY_INIT_F=y
>>> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>>> +CONFIG_SPL_SEPARATE_BSS=y
>>> +CONFIG_SPL_DMA_SUPPORT=y
>>> +# CONFIG_SPL_NAND_SUPPORT is not set
>>> +CONFIG_SPL_RAM_SUPPORT=y
>>> +CONFIG_SPL_SPI_LOAD=y
>>> +CONFIG_SPL_USB_GADGET_SUPPORT=y
>>> +CONFIG_SPL_DFU=y
>>> +CONFIG_SPL_YMODEM_SUPPORT=y
>>> +# CONFIG_CMD_FLASH is not set
>>> +# CONFIG_CMD_SETEXPR is not set
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_SPL_OF_CONTROL=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
>>> +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1
>>> am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk"
>>> +CONFIG_ENV_IS_IN_MMC=y
>>> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
>>> +CONFIG_DM=y
>>> +CONFIG_SPL_DM=y
>>> +CONFIG_SCSI_AHCI=y
>>> +# CONFIG_BLK is not set
>>> +CONFIG_DFU_MMC=y
>>> +CONFIG_DFU_RAM=y
>>> +CONFIG_USB_FUNCTION_FASTBOOT=y
>>> +CONFIG_FASTBOOT_BUF_ADDR=0x82000000
>>> +CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
>>> +CONFIG_FASTBOOT_USB_DEV=1
>>> +CONFIG_FASTBOOT_FLASH=y
>>> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
>>> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
>>> +CONFIG_DM_GPIO=y
>>> +CONFIG_DM_I2C=y
>>> +CONFIG_DM_MMC=y
>>> +CONFIG_MMC_OMAP_HS=y
>>> +CONFIG_DM_SPI_FLASH=y
>>> +CONFIG_SPI_FLASH=y
>>> +CONFIG_SPI_FLASH_BAR=y
>>> +CONFIG_SPI_FLASH_SPANSION=y
>>> +CONFIG_PHY_MICREL=y
>>> +CONFIG_PHY_MICREL_KSZ90X1=y
>>> +CONFIG_DM_ETH=y
>>> +CONFIG_MII=y
>>> +CONFIG_DRIVER_TI_CPSW=y
>>> +CONFIG_DM_PMIC=y
>>> +CONFIG_PMIC_PALMAS=y
>>> +CONFIG_DM_REGULATOR=y
>>> +CONFIG_DM_REGULATOR_PALMAS=y
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_SPI=y
>>> +CONFIG_DM_SPI=y
>>> +CONFIG_TI_QSPI=y
>>> +CONFIG_USB=y
>>> +CONFIG_USB_XHCI_HCD=y
>>> +CONFIG_USB_XHCI_DWC3=y
>>> +CONFIG_USB_DWC3=y
>>> +CONFIG_USB_DWC3_GADGET=y
>>> +CONFIG_USB_DWC3_OMAP=y
>>> +CONFIG_USB_DWC3_PHY_OMAP=y
>>> +CONFIG_OMAP_USB_PHY=y
>>> +CONFIG_USB_STORAGE=y
>>> +CONFIG_USB_GADGET=y
>>> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
>>> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
>>> +CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
>>>