[U-Boot] [PATCH v5 11/26] clk: sunxi: Implement UART clocks

Jagan Teki jagan at amarulasolutions.com
Mon Dec 31 16:59:12 UTC 2018


Implement UART clocks for all Allwinner SoC
clock drivers via ccu clock gate table.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 drivers/clk/sunxi/clk_a10.c  | 9 +++++++++
 drivers/clk/sunxi/clk_a10s.c | 5 +++++
 drivers/clk/sunxi/clk_a23.c  | 6 ++++++
 drivers/clk/sunxi/clk_a31.c  | 7 +++++++
 drivers/clk/sunxi/clk_a64.c  | 6 ++++++
 drivers/clk/sunxi/clk_a83t.c | 6 ++++++
 drivers/clk/sunxi/clk_h3.c   | 5 +++++
 drivers/clk/sunxi/clk_r40.c  | 9 +++++++++
 drivers/clk/sunxi/clk_v3s.c  | 4 ++++
 9 files changed, 57 insertions(+)

diff --git a/drivers/clk/sunxi/clk_a10.c b/drivers/clk/sunxi/clk_a10.c
index 59d9d90a19..1b074e3872 100644
--- a/drivers/clk/sunxi/clk_a10.c
+++ b/drivers/clk/sunxi/clk_a10.c
@@ -19,6 +19,15 @@ static struct ccu_clk_gate a10_gates[] = {
 	[CLK_AHB_EHCI1]		= GATE(0x060, BIT(3)),
 	[CLK_AHB_OHCI1]		= GATE(0x060, BIT(4)),
 
+	[CLK_APB1_UART0]	= GATE(0x06c, BIT(16)),
+	[CLK_APB1_UART1]	= GATE(0x06c, BIT(17)),
+	[CLK_APB1_UART2]	= GATE(0x06c, BIT(18)),
+	[CLK_APB1_UART3]	= GATE(0x06c, BIT(19)),
+	[CLK_APB1_UART4]	= GATE(0x06c, BIT(20)),
+	[CLK_APB1_UART5]	= GATE(0x06c, BIT(21)),
+	[CLK_APB1_UART6]	= GATE(0x06c, BIT(22)),
+	[CLK_APB1_UART7]	= GATE(0x06c, BIT(23)),
+
 	[CLK_USB_OHCI0]		= GATE(0x0cc, BIT(6)),
 	[CLK_USB_OHCI1]		= GATE(0x0cc, BIT(7)),
 	[CLK_USB_PHY]		= GATE(0x0cc, BIT(8)),
diff --git a/drivers/clk/sunxi/clk_a10s.c b/drivers/clk/sunxi/clk_a10s.c
index 474f37d607..a50c6e3f7f 100644
--- a/drivers/clk/sunxi/clk_a10s.c
+++ b/drivers/clk/sunxi/clk_a10s.c
@@ -17,6 +17,11 @@ static struct ccu_clk_gate a10s_gates[] = {
 	[CLK_AHB_EHCI]		= GATE(0x060, BIT(1)),
 	[CLK_AHB_OHCI]		= GATE(0x060, BIT(2)),
 
+	[CLK_APB1_UART0]	= GATE(0x06c, BIT(16)),
+	[CLK_APB1_UART1]	= GATE(0x06c, BIT(17)),
+	[CLK_APB1_UART2]	= GATE(0x06c, BIT(18)),
+	[CLK_APB1_UART3]	= GATE(0x06c, BIT(19)),
+
 	[CLK_USB_OHCI]		= GATE(0x0cc, BIT(6)),
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
diff --git a/drivers/clk/sunxi/clk_a23.c b/drivers/clk/sunxi/clk_a23.c
index 0fc8a5821c..63004b881d 100644
--- a/drivers/clk/sunxi/clk_a23.c
+++ b/drivers/clk/sunxi/clk_a23.c
@@ -17,6 +17,12 @@ static struct ccu_clk_gate a23_gates[] = {
 	[CLK_BUS_EHCI]		= GATE(0x060, BIT(26)),
 	[CLK_BUS_OHCI]		= GATE(0x060, BIT(29)),
 
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+	[CLK_BUS_UART3]		= GATE(0x06c, BIT(19)),
+	[CLK_BUS_UART4]		= GATE(0x06c, BIT(20)),
+
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
 	[CLK_USB_HSIC]		= GATE(0x0cc, BIT(10)),
diff --git a/drivers/clk/sunxi/clk_a31.c b/drivers/clk/sunxi/clk_a31.c
index 03dd9ae913..c01d2a3549 100644
--- a/drivers/clk/sunxi/clk_a31.c
+++ b/drivers/clk/sunxi/clk_a31.c
@@ -20,6 +20,13 @@ static struct ccu_clk_gate a31_gates[] = {
 	[CLK_AHB1_OHCI1]	= GATE(0x060, BIT(30)),
 	[CLK_AHB1_OHCI2]	= GATE(0x060, BIT(31)),
 
+	[CLK_APB2_UART0]	= GATE(0x06c, BIT(16)),
+	[CLK_APB2_UART1]	= GATE(0x06c, BIT(17)),
+	[CLK_APB2_UART2]	= GATE(0x06c, BIT(18)),
+	[CLK_APB2_UART3]	= GATE(0x06c, BIT(19)),
+	[CLK_APB2_UART4]	= GATE(0x06c, BIT(20)),
+	[CLK_APB2_UART5]	= GATE(0x06c, BIT(21)),
+
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
 	[CLK_USB_PHY2]		= GATE(0x0cc, BIT(10)),
diff --git a/drivers/clk/sunxi/clk_a64.c b/drivers/clk/sunxi/clk_a64.c
index 28bda1f497..b427e3adda 100644
--- a/drivers/clk/sunxi/clk_a64.c
+++ b/drivers/clk/sunxi/clk_a64.c
@@ -19,6 +19,12 @@ static const struct ccu_clk_gate a64_gates[] = {
 	[CLK_BUS_OHCI0]		= GATE(0x060, BIT(28)),
 	[CLK_BUS_OHCI1]		= GATE(0x060, BIT(29)),
 
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+	[CLK_BUS_UART3]		= GATE(0x06c, BIT(19)),
+	[CLK_BUS_UART4]		= GATE(0x06c, BIT(20)),
+
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
 	[CLK_USB_HSIC]		= GATE(0x0cc, BIT(10)),
diff --git a/drivers/clk/sunxi/clk_a83t.c b/drivers/clk/sunxi/clk_a83t.c
index 45faef2f11..fbffa3bf5f 100644
--- a/drivers/clk/sunxi/clk_a83t.c
+++ b/drivers/clk/sunxi/clk_a83t.c
@@ -18,6 +18,12 @@ static struct ccu_clk_gate a83t_gates[] = {
 	[CLK_BUS_EHCI1]		= GATE(0x060, BIT(27)),
 	[CLK_BUS_OHCI0]		= GATE(0x060, BIT(29)),
 
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+	[CLK_BUS_UART3]		= GATE(0x06c, BIT(19)),
+	[CLK_BUS_UART4]		= GATE(0x06c, BIT(20)),
+
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
 	[CLK_USB_HSIC]		= GATE(0x0cc, BIT(10)),
diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c
index 283fc31b01..f706e77dee 100644
--- a/drivers/clk/sunxi/clk_h3.c
+++ b/drivers/clk/sunxi/clk_h3.c
@@ -23,6 +23,11 @@ static struct ccu_clk_gate h3_gates[] = {
 	[CLK_BUS_OHCI2]		= GATE(0x060, BIT(30)),
 	[CLK_BUS_OHCI3]		= GATE(0x060, BIT(31)),
 
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+	[CLK_BUS_UART3]		= GATE(0x06c, BIT(19)),
+
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
 	[CLK_USB_PHY2]		= GATE(0x0cc, BIT(10)),
diff --git a/drivers/clk/sunxi/clk_r40.c b/drivers/clk/sunxi/clk_r40.c
index 2a6000f4dc..3405b39c46 100644
--- a/drivers/clk/sunxi/clk_r40.c
+++ b/drivers/clk/sunxi/clk_r40.c
@@ -21,6 +21,15 @@ static struct ccu_clk_gate r40_gates[] = {
 	[CLK_BUS_OHCI1]		= GATE(0x060, BIT(30)),
 	[CLK_BUS_OHCI2]		= GATE(0x060, BIT(31)),
 
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+	[CLK_BUS_UART3]		= GATE(0x06c, BIT(19)),
+	[CLK_BUS_UART4]		= GATE(0x06c, BIT(20)),
+	[CLK_BUS_UART5]		= GATE(0x06c, BIT(21)),
+	[CLK_BUS_UART6]		= GATE(0x06c, BIT(22)),
+	[CLK_BUS_UART7]		= GATE(0x06c, BIT(23)),
+
 	[CLK_USB_PHY0]		= GATE(0x0cc, BIT(8)),
 	[CLK_USB_PHY1]		= GATE(0x0cc, BIT(9)),
 	[CLK_USB_PHY2]		= GATE(0x0cc, BIT(10)),
diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c
index 0eeea84c1a..a662bc3e93 100644
--- a/drivers/clk/sunxi/clk_v3s.c
+++ b/drivers/clk/sunxi/clk_v3s.c
@@ -15,6 +15,10 @@
 static struct ccu_clk_gate v3s_gates[] = {
 	[CLK_BUS_OTG]		= GATE(0x060, BIT(24)),
 
+	[CLK_BUS_UART0]		= GATE(0x06c, BIT(16)),
+	[CLK_BUS_UART1]		= GATE(0x06c, BIT(17)),
+	[CLK_BUS_UART2]		= GATE(0x06c, BIT(18)),
+
 	[CLK_USB_PHY0]          = GATE(0x0cc, BIT(8)),
 };
 
-- 
2.18.0.321.gffc6fa0e3



More information about the U-Boot mailing list