[U-Boot] [PATCH 1/2] net: designware: fix tx packet length

[Marek Vasut]

On 12/09/2018 09:50 PM, Simon Goldschmidt wrote:
> Am 17.11.2018 um 17:02 schrieb Joe Hershberger:
>> On Sat, Nov 17, 2018 at 3:25 AM Simon Goldschmidt
>> <simon.k.r.goldschmidt at gmail.com> wrote:
>>>
>>> The designware driver has a bug in setting the tx length into the dma
>>> descriptor: it always or's the length into the descriptor without
>>> zeroing out the length mask before.
>>>
>>> This results in occasional packets being transmitted with a length
>>> greater than they should be (trailer). Due to the nature of Ethernet
>>> allowing such a trailer, most packets seem to be parsed fine by remote
>>> hosts, which is probably why this hasn't been noticed.
>>>
>>> Fix this by correctly clearing the size mask before setting the new
>>> length.
>>>
>>> Tested on socfpga gen5.
>>>
>>> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
>>
>> Acked-by: Joe Hershberger <joe.hershberger at ni.com>
>>
> 
> Marek, this and 2/2 is a assigned to you in patchwork, will you push
> them or is it Joe's code as u-boot-net maintainer?

This is net , so Joe should pick it .

-- 
Best regards,
Marek Vasut