[U-Boot] [PATCH 11/16] configs: Remove SF_DUAL_FLASH
Vignesh R
vigneshr at ti.com
Wed Dec 12 17:32:23 UTC 2018
SF_DUAL_FLASH claims to enable support for SF_DUAL_STACKED_FLASH and
SF_DUAL_PARALLEL_FLASH. But, in current U-Boot code, grepping for above
enums yield no user and therefore support seems to be incomplete. Remove
these configs so as to avoid confusion.
Signed-off-by: Vignesh R <vigneshr at ti.com>
---
configs/topic_miamilite_defconfig | 1 -
configs/topic_miamiplus_defconfig | 1 -
configs/xilinx_zynqmp_mini_qspi_defconfig | 1 -
configs/xilinx_zynqmp_zc1232_revA_defconfig | 1 -
configs/xilinx_zynqmp_zc1254_revA_defconfig | 1 -
configs/xilinx_zynqmp_zc1275_revA_defconfig | 1 -
configs/xilinx_zynqmp_zc1275_revB_defconfig | 1 -
configs/xilinx_zynqmp_zcu104_revA_defconfig | 1 -
configs/xilinx_zynqmp_zcu104_revC_defconfig | 1 -
configs/xilinx_zynqmp_zcu106_revA_defconfig | 1 -
doc/SPI/README.dual-flash | 92 ---------------------
drivers/mtd/spi/Kconfig | 6 --
include/configs/socfpga_stratix10_socdk.h | 1 -
13 files changed, 109 deletions(-)
delete mode 100644 doc/SPI/README.dual-flash
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig
index fe27239c94bf..8e912d8586d2 100644
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@@ -40,7 +40,6 @@ CONFIG_ZYNQ_I2C1=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_DEBUG_UART_ZYNQ=y
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
index 4b7ff3ae1815..371b2ad91571 100644
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@@ -39,7 +39,6 @@ CONFIG_ZYNQ_I2C1=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
# CONFIG_NETDEVICES is not set
diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig
index e6e024a8098e..9f2a2f59f6ea 100644
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@@ -55,7 +55,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig
index 1e8529098f74..06247a0628fb 100644
--- a/configs/xilinx_zynqmp_zc1232_revA_defconfig
+++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig
@@ -37,7 +37,6 @@ CONFIG_FPGA_ZYNQMPPL=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig
index f883f8ecc692..5bc1aaba696b 100644
--- a/configs/xilinx_zynqmp_zc1254_revA_defconfig
+++ b/configs/xilinx_zynqmp_zc1254_revA_defconfig
@@ -37,7 +37,6 @@ CONFIG_FPGA_ZYNQMPPL=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zc1275_revA_defconfig b/configs/xilinx_zynqmp_zc1275_revA_defconfig
index 2aa71b3fbc1c..d0b0a19caf93 100644
--- a/configs/xilinx_zynqmp_zc1275_revA_defconfig
+++ b/configs/xilinx_zynqmp_zc1275_revA_defconfig
@@ -37,7 +37,6 @@ CONFIG_FPGA_ZYNQMPPL=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zc1275_revB_defconfig b/configs/xilinx_zynqmp_zc1275_revB_defconfig
index debb23739bfd..6bc3b6af9a67 100644
--- a/configs/xilinx_zynqmp_zc1275_revB_defconfig
+++ b/configs/xilinx_zynqmp_zc1275_revB_defconfig
@@ -40,7 +40,6 @@ CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig
index 4a24d5d9cfe0..28e18ae1252e 100644
--- a/configs/xilinx_zynqmp_zcu104_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig
@@ -57,7 +57,6 @@ CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig
index a3f4c7f36614..3ddd63181603 100644
--- a/configs/xilinx_zynqmp_zcu104_revC_defconfig
+++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig
@@ -58,7 +58,6 @@ CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig
index 157bbce7fd2b..a6da8976317c 100644
--- a/configs/xilinx_zynqmp_zcu106_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig
@@ -66,7 +66,6 @@ CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
-CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/doc/SPI/README.dual-flash b/doc/SPI/README.dual-flash
deleted file mode 100644
index 6c88d65dd49f..000000000000
--- a/doc/SPI/README.dual-flash
+++ /dev/null
@@ -1,92 +0,0 @@
-SPI/QSPI Dual flash connection modes:
-=====================================
-
-This describes how SPI/QSPI flash memories are connected to a given
-controller in a single chip select line.
-
-Current spi_flash framework supports, single flash memory connected
-to a given controller with single chip select line, but there are some
-hw logics(ex: xilinx zynq qspi) that describes two/dual memories are
-connected with a single chip select line from a controller.
-
-"dual_flash" from include/spi.h describes these types of connection mode
-
-Possible connections:
---------------------
-SF_SINGLE_FLASH:
- - single spi flash memory connected with single chip select line.
-
- +------------+ CS +---------------+
- | |----------------------->| |
- | Controller | I0[3:0] | Flash memory |
- | SPI/QSPI |<======================>| (SPI/QSPI) |
- | | CLK | |
- | |----------------------->| |
- +------------+ +---------------+
-
-SF_DUAL_STACKED_FLASH:
- - dual spi/qspi flash memories are connected with a single chipselect
- line and these two memories are operating stacked fasion with shared buses.
- - xilinx zynq qspi controller has implemented this feature [1]
-
- +------------+ CS +---------------+
- | |---------------------->| |
- | | I0[3:0] | Upper Flash |
- | | +=========>| memory |
- | | | CLK | (SPI/QSPI) |
- | | | +---->| |
- | Controller | CS | | +---------------+
- | SPI/QSPI |------------|----|---->| |
- | | I0[3:0] | | | Lower Flash |
- | |<===========+====|====>| memory |
- | | CLK | | (SPI/QSPI) |
- | |-----------------+---->| |
- +------------+ +---------------+
-
- - two memory flash devices should has same hw part attributes (like size,
- vendor..etc)
- - Configurations:
- on LQSPI_CFG register, Enable TWO_MEM[BIT:30] on LQSPI_CFG
- Enable U_PAGE[BIT:28] if U_PAGE flag set - upper memory
- Disable U_PAGE[BIT:28] if U_PAGE flag unset - lower memory
- - Operation:
- accessing memories serially like one after another.
- by default, if U_PAGE is unset lower memory should accessible,
- once user wants to access upper memory need to set U_PAGE.
-
-SPI_FLASH_CONN_DUALPARALLEL:
- - dual spi/qspi flash memories are connected with a single chipselect
- line and these two memories are operating parallel with separate buses.
- - xilinx zynq qspi controller has implemented this feature [1]
-
- +-------------+ CS +---------------+
- | |---------------------->| |
- | | I0[3:0] | Upper Flash |
- | |<=====================>| memory |
- | | CLK | (SPI/QSPI) |
- | |---------------------->| |
- | Controller | CS +---------------+
- | SPI/QSPI |---------------------->| |
- | | I0[3:0] | Lower Flash |
- | |<=====================>| memory |
- | | CLK | (SPI/QSPI) |
- | |---------------------->| |
- +-------------+ +---------------+
-
- - two memory flash devices should has same hw part attributes (like size,
- vendor..etc)
- - Configurations:
- Need to enable SEP_BUS[BIT:29],TWO_MEM[BIT:30] on LQSPI_CFG register.
- - Operation:
- Even bits, i.e. bit 0, 2, 4 ., of a data word is located in the lower memory
- and odd bits, i.e. bit 1, 3, 5, ., of a data word is located in the upper memory.
-
-Note: Technically there is only one CS line from the controller, but
-zynq qspi controller has an internal hw logic to enable additional CS
-when controller is configured for dual memories.
-
-[1] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
-
---
-Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
-05-01-2014.
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 6afaaa8731cb..b552704ee285 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -45,12 +45,6 @@ config SPI_FLASH_SFDP_SUPPORT
SPI NOR flashes using Serial Flash Discoverable Parameters (SFDP)
tables as per JESD216 standard.
-config SF_DUAL_FLASH
- bool "SPI DUAL flash memory support"
- help
- Enable this option to support two flash memories connected to a single
- controller. Currently Xilinx Zynq qspi supports this.
-
config SPI_FLASH_ATMEL
bool "Atmel SPI flash support"
help
diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h
index e190b3d9889d..0b705e6adb80 100644
--- a/include/configs/socfpga_stratix10_socdk.h
+++ b/include/configs/socfpga_stratix10_socdk.h
@@ -57,7 +57,6 @@
*/
#ifdef CONFIG_CADENCE_QSPI
/* Enable it if you want to use dual-stacked mode */
-#undef CONFIG_SF_DUAL_FLASH
/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/
/* Flash device info */
--
2.19.2
More information about the U-Boot
mailing list