[U-Boot] [PATCH v3 0/6] Update support for Helios4 board

Aditya Prayoga aditya at kobol.io
Tue Dec 4 16:57:19 UTC 2018


Hi everyone,

This series add some missing peripheral support and fixed that was
implemented on U-Boot 2013.01 Marvell version: 2015_T1.0p16
- helios4: mmc: move environment before 1M
- helios4: Enable I2C and IO Expander
- helios4: Reset uSOM onboard phy during board init

and added new peripheral support and improvement
- helios4: Enable mvebu GPIO
- helios4: Enable SPI flash support
- helios4: Reduce U-Boot image size

---
Notes
  checkpatch.pl emit "WARNING: added, moved or deleted file(s), does
    MAINTAINERS need updating?" on 0002-arm-mvebu-helios4-Enable-I2C-and-
    IO-Expander.patch due to new file, armada-388-helios4-u-boot.dtsi

---
Changes v1 -> v2:
  * Remove arm: mvebu: helios4: Update Load address patch.
  * Rearrange the patch, enabling I2C and convert I2C IO expander to DM
    should applied together.
  * Move u-boot specific properties into armada-388-helios4-u-boot.dtsi
    (Dennis Gilmore)
  * Use generic gpio_* API to do phy reset (Baruch Siach)
Changes v2 -> v3:
  * Use named gpios for PHY reset (Stefan Roese)
---
Aditya Prayoga (6):
  arm: mvebu: helios4: mmc: move environment before 1M
  arm: mvebu: helios4: Enable I2C and IO Expander
  arm: mvebu: helios4: Enable mvebu GPIO
  arm: mvebu: helios4: Reduce U-Boot image size
  arm: mvebu: helios4: Enable SPI flash support
  arm: mvebu: helios4: Reset uSOM onboard phy during board init

 arch/arm/dts/armada-388-helios4-u-boot.dtsi | 22 +++++++++++++
 board/kobol/helios4/helios4.c               | 32 -------------------
 configs/helios4_defconfig                   | 13 +++++---
 include/configs/helios4.h                   | 48 ++++++++++++++++++++---------
 4 files changed, 64 insertions(+), 51 deletions(-)
 create mode 100644 arch/arm/dts/armada-388-helios4-u-boot.dtsi

-- 
2.7.4



More information about the U-Boot mailing list