[U-Boot] [RESEND PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection.

[Heiko Schocher]

Hello Jean-Jacques,

Am 07.12.2018 um 14:50 schrieb Jean-Jacques Hiblot:
> The DRA7 platforms requires that the dtb used in the SPL really matches the
> platform  to have the best MMC performances.
> To detect the board type/version an I2C EEPROM is read. This requires that
> DM is initialized before the detection. As a consequence we must reset the
> DM after the board detection is a new dtb would better match the platform.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
> 
> ---
> 
> Changes in v3: None
> Changes in v2: None
> 
>   arch/arm/mach-omap2/hwinit-common.c | 20 ++++++++++++++++++++
>   configs/dra7xx_evm_defconfig        |  2 ++
>   2 files changed, 22 insertions(+)

Thanks for resending!

Reviewed-by: Heiko Schocher <hs at denx.de>

bye,
Heiko Schocher
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de