[U-Boot] [PATCH v2 0/2] SiFive UART support

Rick Chen rickchen36 at gmail.com
Mon Dec 17 05:49:14 UTC 2018


Hi Anup

Anup Patel <anup at brainfault.org> 於 2018年12月17日 週一 下午12:15寫道:
>
> On Mon, Dec 17, 2018 at 7:21 AM Rick Chen <rickchen36 at gmail.com> wrote:
> >
> > Hi Anup
> >
> > > > From: Anup Patel [mailto:anup at brainfault.org]
> > > > Sent: Friday, December 14, 2018 5:23 PM
> > > > To: Rick Jian-Zhi Chen(陳建志); Bin Meng; Lukas Auer
> > > > Cc: Alexander Graf; Palmer Dabbelt; Atish Patra; Christoph Hellwig; U-Boot
> > > > Mailing List
> > > > Subject: Re: [PATCH v2 0/2] SiFive UART support
> > > >
> > > > On Tue, Dec 11, 2018 at 8:32 PM Anup Patel <anup at brainfault.org> wrote:
> > > > >
> > > > > This patchset adds SiFive UART driver for SiFive UART found on SiFive
> > > > > boards.
> > > > >
> > > > > The driver is tested on QEMU sifive_u machine. In fact, with this
> > > > > patchset same U-Boot binary boots on QEMU virt machine and QEMU
> > > > > sifive_u machine in both M-mode and S-mode.
> > > > >
> > > > > The patches are based upon latest RISC-V UBoot tree
> > > > > (git://git.denx.de/u-boot-riscv.git) at commit id
> > > > > 48cbf6246052de10d35b616b5efb2f783904a49d
> > > > >
> > > > > Changes since v1:
> > > > >  - Fixed copyright header in SiFive UART driver
> > > > >  - Imply SIFIVE_SERIAL for QEMU emulation instead
> > > > >    of enabling it in defconfigs.
> > > > >
> > > > > Anup Patel (2):
> > > > >   drivers: serial: Add SiFive UART driver
> > > > >   riscv: qemu: Imply SIFIVE_SERIAL for emulation
> > > > >
> > > > >  board/emulation/qemu-riscv/Kconfig |   1 +
> > > > >  drivers/serial/Kconfig             |  13 ++
> > > > >  drivers/serial/Makefile            |   1 +
> > > > >  drivers/serial/serial_sifive.c     | 191 +++++++++++++++++++++++++++++
> > > > >  4 files changed, 206 insertions(+)
> > > > >  create mode 100644 drivers/serial/serial_sifive.c
> > > > >
> > > > > --
> > > > > 2.17.1
> > > > >
> > > >
> > > > Hi Rick,
> > > >
> > > > The required QEMU fix has been submitted by Alistair Francis on QEMU mailing
> > > > list.
> > > > (QEMU PATCH subject "sifive_u: Set 'clock-frequency' DT property for SiFive
> > > > UART")
> > > >
> > > > Can you please consider this series for U-Boot v2019.01?
> > > >
> >
> > OK
> > I will include yours in this PR.
>
> I have send v3 of this patch. Please include that.
>

Yes.
I fetch your v3 and apply to u-boot-riscv.git.
Travis is verifying.
Then I will send a PR later.

B.R
Rick

> Thanks,
> Anup


More information about the U-Boot mailing list