[U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"

[Michael Nazzareno Trimarchi]

Hi Karl

On Tue, Dec 18, 2018 at 7:12 PM Karl Palsson <karlp at tweak.net.au> wrote:
>
>
> Jagan Teki <jagan at amarulasolutions.com> wrote:
> > It's 4 days before, "U-Boot] sunxi: regression in dram init for
> > h3 board"
> >
> > 7 days is not 4-days :)
>
> True, it was last week, not a week ago.
>
> > I would expect some debugging on this during these days and
> > find the real root cause.
>
> Just so there's no unmet expectations here, I'm not doing any
> _debugging_ of this. (Nor do I have any planned) Given that this
> is a regression in working devices, I would _presume_ (quite
> likely wrongly) that the honus of debugging this would be on the
> people who suggested this patch, not people affected by it. I'm
> happy to test things, but I have zero experience with dram init,
> (only marginally greater than zero experience with uboot overall)
> and no sane methods for debugging this further, nor enough
> devices to give any test confidence that any debugging I could do
> would be useful.
>

Do you have error after relocation or before relocation? Does it go
outside and print DRAM size?

Michael

> Sincerely,
> Karl P_______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |