[U-Boot] [PATCH v3 0/7] ] Add support for the SoCs found in Microsemi switches
Gregory CLEMENT
gregory.clement at bootlin.com
Wed Dec 5 17:10:47 UTC 2018
Hello,
For the record this the third version of the series adding the
support of 2 SoCs: Ocelot and Luton from Microsemi. Both of them
belongs to the same family Vcore III.
We found them on various advanced switches product.
The support for Ocelot already have been submit to Linux, but not yet
the Luton support.
Since the v2, U-boot was continued to be tested internally and besides
the changes asked by Daniel, we also made several fixes and
improvements. Most of them come from Lars Povlsen and Horatiu Vultur.
I tried to address all the comment from Daniel and for the part I kept
more or less as is, I added comment explaining the rational for this
choice inside the code itself.
Gregory
Changelog:
v2 -> v3:
- Added n entry in the MAINTAINER file for the SoCs
- Fixup the last errors from checkpatch, the remaining ones are only
about volatile, long line and Kconfig, but each ones have good
reason to be here.
- Add SPI NAND flash support in device tree and configuration files,
the driver are already be merged in U-Boot.
- In order to improve boot time, setup the TLB to allow using cache
in the memory mapped to the SPI NOR.
- Removed all the macro REG_CFG to only keep direct access to memory.
- Put back the setting of the interrupt map as it is needed by
mainline kernel (without it the kernel doesn't finish to boot)
- During DDR training, prevent the compiler reordering the
instruction.
- Add early debug support to Ocelot (it was already done for Luton)
v1 -> v2:
- a big clean-up for indentation and some style issue
- usage of the clrsetbits family functions where it was possible
- split the patches for Ocelot and Luton
- add a new patch to introduce the icache_lock function which was in
the mscc directory in the first version
- remove more unused define in the platform header files
- use the automatic cache size detection instead of hard coding it
- reduce the tlb init to only two entries for the IO as needed by the
kernel
- remove the interrupt disabling
- fix the ddr init for luton
Gregory CLEMENT (7):
MIPS: move create_tlb() in an proper header: mipsregs.h
MIPS: Allow to prefetch and lock instructions into cache
MSCC: add support for Ocelot SoCs
MSCC: add support for Luton SoCs
MSCC: add board support for the Ocelots based evaluation boards
MSCC: add board support for the Luton based evaluation board
MIPS: bootm: Add support for Vcore III linux kernel
MAINTAINERS | 13 +
arch/mips/Kconfig | 6 +
arch/mips/Makefile | 1 +
arch/mips/cpu/cpu.c | 10 -
arch/mips/dts/luton_pcb091.dts | 35 +
arch/mips/dts/mscc,luton.dtsi | 87 ++
arch/mips/dts/mscc,ocelot.dtsi | 152 ++++
arch/mips/dts/mscc,ocelot_pcb.dtsi | 42 +
arch/mips/dts/ocelot_pcb120.dts | 12 +
arch/mips/dts/ocelot_pcb123.dts | 12 +
arch/mips/include/asm/cacheops.h | 19 +
arch/mips/include/asm/mipsregs.h | 11 +
arch/mips/lib/bootm.c | 78 +-
arch/mips/mach-mscc/Kconfig | 86 ++
arch/mips/mach-mscc/Makefile | 6 +
arch/mips/mach-mscc/cpu.c | 102 +++
arch/mips/mach-mscc/dram.c | 73 ++
arch/mips/mach-mscc/include/ioremap.h | 51 ++
arch/mips/mach-mscc/include/mach/common.h | 28 +
arch/mips/mach-mscc/include/mach/ddr.h | 798 ++++++++++++++++++
.../mips/mach-mscc/include/mach/luton/luton.h | 24 +
.../include/mach/luton/luton_devcpu_gcb.h | 14 +
.../include/mach/luton/luton_icpu_cfg.h | 245 ++++++
.../mach-mscc/include/mach/ocelot/ocelot.h | 24 +
.../include/mach/ocelot/ocelot_devcpu_gcb.h | 21 +
.../include/mach/ocelot/ocelot_icpu_cfg.h | 274 ++++++
arch/mips/mach-mscc/include/mach/tlb.h | 55 ++
arch/mips/mach-mscc/lowlevel_init.S | 30 +
arch/mips/mach-mscc/lowlevel_init_luton.S | 62 ++
arch/mips/mach-mscc/reset.c | 36 +
board/mscc/luton/Kconfig | 14 +
board/mscc/luton/Makefile | 3 +
board/mscc/luton/luton.c | 28 +
board/mscc/ocelot/Kconfig | 14 +
board/mscc/ocelot/Makefile | 4 +
board/mscc/ocelot/ocelot.c | 58 ++
configs/mscc_luton_defconfig | 66 ++
configs/mscc_ocelot_defconfig | 73 ++
configs/mscc_ocelot_pcb120_defconfig | 66 ++
include/configs/vcoreiii.h | 82 ++
40 files changed, 2785 insertions(+), 30 deletions(-)
create mode 100644 arch/mips/dts/luton_pcb091.dts
create mode 100644 arch/mips/dts/mscc,luton.dtsi
create mode 100644 arch/mips/dts/mscc,ocelot.dtsi
create mode 100644 arch/mips/dts/mscc,ocelot_pcb.dtsi
create mode 100644 arch/mips/dts/ocelot_pcb120.dts
create mode 100644 arch/mips/dts/ocelot_pcb123.dts
create mode 100644 arch/mips/mach-mscc/Kconfig
create mode 100644 arch/mips/mach-mscc/Makefile
create mode 100644 arch/mips/mach-mscc/cpu.c
create mode 100644 arch/mips/mach-mscc/dram.c
create mode 100644 arch/mips/mach-mscc/include/ioremap.h
create mode 100644 arch/mips/mach-mscc/include/mach/common.h
create mode 100644 arch/mips/mach-mscc/include/mach/ddr.h
create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton.h
create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_devcpu_gcb.h
create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_icpu_cfg.h
create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot.h
create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h
create mode 100644 arch/mips/mach-mscc/include/mach/tlb.h
create mode 100644 arch/mips/mach-mscc/lowlevel_init.S
create mode 100644 arch/mips/mach-mscc/lowlevel_init_luton.S
create mode 100644 arch/mips/mach-mscc/reset.c
create mode 100644 board/mscc/luton/Kconfig
create mode 100644 board/mscc/luton/Makefile
create mode 100644 board/mscc/luton/luton.c
create mode 100644 board/mscc/ocelot/Kconfig
create mode 100644 board/mscc/ocelot/Makefile
create mode 100644 board/mscc/ocelot/ocelot.c
create mode 100644 configs/mscc_luton_defconfig
create mode 100644 configs/mscc_ocelot_defconfig
create mode 100644 configs/mscc_ocelot_pcb120_defconfig
create mode 100644 include/configs/vcoreiii.h
--
2.19.2
More information about the U-Boot
mailing list