[U-Boot] [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts

Lukasz Majewski lukma at denx.de
Thu Dec 6 14:42:17 UTC 2018


On Thu,  6 Dec 2018 14:57:09 +0100
Stefan Agner <stefan at agner.ch> wrote:

> From: Stefan Agner <stefan.agner at toradex.com>
> 
> Each ECC layout consumes about 2984 bytes in the .data section. Allow
> to disable the default ECC layouts if a driver is known to provide its
> own ECC layout.
> 
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
> ---
> 
>  drivers/mtd/nand/raw/Kconfig     | 7 +++++++
>  drivers/mtd/nand/raw/nand_base.c | 4 ++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/Kconfig
> b/drivers/mtd/nand/raw/Kconfig index 008f7b4b4b..b06c45788a 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -9,6 +9,12 @@ config SYS_NAND_SELF_INIT
>  	  This option, if enabled, provides more flexible and
> linux-like NAND initialization process.
>  
> +config SYS_NAND_DRIVER_ECC_LAYOUT
> +	bool
> +	help
> +	  Omit standard ECC layouts to safe space. Select this if
> your driver
> +	  is known to provide its own ECC layout.
> +
>  config NAND_ATMEL
>  	bool "Support Atmel NAND controller"
>  	imply SYS_NAND_USE_FLASH_BBT
> @@ -81,6 +87,7 @@ config NAND_OMAP_ELM
>  config NAND_VF610_NFC
>  	bool "Support for Freescale NFC for VF610"
>  	select SYS_NAND_SELF_INIT
> +	select SYS_NAND_DRIVER_ECC_LAYOUT
>  	imply CMD_NAND
>  	help
>  	  Enables support for NAND Flash Controller on some Freescale
> diff --git a/drivers/mtd/nand/raw/nand_base.c
> b/drivers/mtd/nand/raw/nand_base.c index 92daebe120..6d2ff58d86 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -47,6 +47,7 @@
>  #include <linux/errno.h>
>  
>  /* Define default oob placement schemes for large and small page
> devices */ +#ifdef CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
>  static struct nand_ecclayout nand_oob_8 = {
>  	.eccbytes = 3,
>  	.eccpos = {0, 1, 2},
> @@ -89,6 +90,7 @@ static struct nand_ecclayout nand_oob_128 = {
>  		{.offset = 2,
>  		 .length = 78} }
>  };
> +#endif
>  
>  static int nand_get_device(struct mtd_info *mtd, int new_state);
>  
> @@ -4339,6 +4341,7 @@ int nand_scan_tail(struct mtd_info *mtd)
>  	 */
>  	if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
>  		switch (mtd->oobsize) {
> +#ifdef CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
>  		case 8:
>  			ecc->layout = &nand_oob_8;
>  			break;
> @@ -4351,6 +4354,7 @@ int nand_scan_tail(struct mtd_info *mtd)
>  		case 128:
>  			ecc->layout = &nand_oob_128;
>  			break;
> +#endif
>  		default:
>  			pr_warn("No oob scheme defined for oobsize
> %d\n", mtd->oobsize);

Reviewed-by: Lukasz Majewski <lukma at denx.de>


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181206/50d72c8f/attachment.sig>


More information about the U-Boot mailing list