[U-Boot] [PATCH v3] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Kever Yang
kever.yang at rock-chips.com
Fri Dec 14 01:37:12 UTC 2018
This is a sync with kernel mainline dts.
The U-Boot eMMC does not need to care about the power for Rockchip
SoCs, because if the board is using eMMC, the power will default on
(for bootrom), so the 'vmmc', 'vqmmc' is only useful for SD in U-Boot.
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---
Changes in v3:
- update commit message base on comments from Philipp and Tom.
Changes in v2:
- only update for rk3288-evb, remove change for other boards.
arch/arm/dts/rk3288-evb.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi
index ce75bd5d28..04902c0bd3 100644
--- a/arch/arm/dts/rk3288-evb.dtsi
+++ b/arch/arm/dts/rk3288-evb.dtsi
@@ -150,8 +150,6 @@
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vcc_flash>;
status = "okay";
};
--
2.18.0
More information about the U-Boot
mailing list