[U-Boot] [PATCH] imx8mq_evk_defconfig: Move file system options to Kconfig

[Offouga Joris]

Hi Fabio, 

Joris Offouga

Le 29 déc. 2018 à 05:58, Peng Fan <peng.fan at nxp.com> a écrit :

>> -----Original Message-----
>> From: Fabio Estevam [mailto:festevam at gmail.com]
>> Sent: 2018年12月28日 3:14
>> To: sbabic at denx.de
>> Cc: dl-uboot-imx <uboot-imx at nxp.com>; u-boot at lists.denx.de;
>> spencercw at gmail.com; Fabio Estevam <festevam at gmail.com>
>> Subject: [PATCH] imx8mq_evk_defconfig: Move file system options to Kconfig
>> 
>> Chris Spencer reports that when enabling ext4 read support without also
>> enabling write support the following error is seen:
>> 
>> fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a function); did
>> you mean 'ext4_read_file'?
>>   .write = ext4_write_file,
>>            ^~~~~~~~~~~~~~~
>> Fix this problem by moving these options to Kconfig.
>> 
>> Reported-by: Chris Spencer <spencercw at gmail.com>
>> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> 
> Acked-by: Peng Fan <peng.fan at nxp.com>
> 
>> ---
>> configs/imx8mq_evk_defconfig | 5 +++++
>> include/configs/imx8mq_evk.h | 6 ------
>> 2 files changed, 5 insertions(+), 6 deletions(-)
>> 
>> diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
>> index f216d46a8f..b473fcd61b 100644
>> --- a/configs/imx8mq_evk_defconfig
>> +++ b/configs/imx8mq_evk_defconfig
>> @@ -15,6 +15,11 @@ CONFIG_SPL_LOAD_FIT=y  CONFIG_SPL=y
>> CONFIG_SPL_BOARD_INIT=y  CONFIG_HUSH_PARSER=y
>> +CONFIG_DOS_PARTITION=y
>> +CONFIG_CMD_EXT2=y
>> +CONFIG_CMD_EXT4=y
>> +CONFIG_CMD_EXT4_WRITE=y
>> +CONFIG_CMD_FAT=
You forgot "y" to this line, correct this in CONFIG_CMD_FAT=y 
>> CONFIG_CMD_GPIO=y
>> CONFIG_CMD_I2C=y
>> CONFIG_CMD_CACHE=y
>> diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
>> index 35f81152f2..f0430224cb 100644
>> --- a/include/configs/imx8mq_evk.h
>> +++ b/include/configs/imx8mq_evk.h
>> @@ -226,12 +226,6 @@
>> #define CONFIG_SYS_FSL_USDHC_NUM    2
>> #define CONFIG_SYS_FSL_ESDHC_ADDR       0
>> 
>> -#define CONFIG_DOS_PARTITION
>> -#define CONFIG_CMD_EXT2
>> -#define CONFIG_CMD_EXT4
>> -#define CONFIG_CMD_EXT4_WRITE
>> -#define CONFIG_CMD_FAT
>> -
>> #define CONFIG_SUPPORT_EMMC_BOOT    /* eMMC specific */
>> #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
>> 
>> --
>> 2.17.1
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot