[U-Boot] [RESEND PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms

[Simon Glass]

Hi Tom,

On Fri, 7 Dec 2018 at 07:23, Tom Rini <trini at konsulko.com> wrote:
>
> On Fri, Dec 07, 2018 at 02:50:36PM +0100, Jean-Jacques Hiblot wrote:
>
> > This series remove the usage of the DM_I2C_COMPAT option for all the ti
> > platforms. It also takes this opportunity to not disable DM_I2C in the SPL.
> >
> > There are a couples of issues to fix:
> > - CMD_EEPROM does not support the DM API. Fixed by removing this option
> >   when DM_I2C is used without DM_I2C_COMPAT
> > - i2c_get_chip_for_busnum() does not work when OF_CONTROL is not used
> >   (as is the case with am33xx SPL).
> > - The I2C driver do not support DM_I2C without OF_CONTROL.
> > - Most of the PMIC drivers do not support the I2C DM API.
> > - Board detection is done prior DM initialization. Fixed by moving it after
> >   DM is initialized. That move breaks the DRA7 platforms (The fixes for
> >   that are at the last 5 patches this series)
> >
> > When all this is taken care of DM_I2C_COMPAT can be removed and DM_I2C
> > enabled in the SPL.
> >
> > This has been tested with the following boards:
> > - am437x SK
> > - am335x SK
> > - am335x beaglebone (both DM and non-DM config)
> > - dra76 evm
> > - am572 evm
> > - k2g evm
> >
> > The following targets may be impacted by the changes related to
> > SPL_OF_CONTROL and SPL_OF_PLATDATA:
> > - am3517_evm_defconfig
> > - omap3_logic_defconfig
> > - chromebit_mickey_defconfig
> > - chromebook_jerry_defconfig
> > - chromebook_minnie_defconfig
> > - evb-rk3399_defconfig
> > - rock_defconfig
> >
> > It would be nice it some of you could try to boot them.
>
> So I've just reviewed-by all of the TI parts.  Heiko, do you want this
> via the I2C tree?  Simon, do you want this via the DM tree?  Do both of
> you just want me to grab it instead?  The window on applying this for
> this release is closing quickly but this has been around for long enough
> that I'd like to see it go in.  Thanks!

Agreed. I am happy to take it, or you can. Please let me know.

Regards,
Simon