[U-Boot] [PATCH 3/5] omap3: igep00x0: Switch to using TI_COMMON_CMD_OPTION

[Enric Balletbo i Serra]

Enable TI_COMMON_CMD_OPTIONS and remove similar options
from the defconfig.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
---
 board/isee/igep00x0/Kconfig | 2 ++
 configs/igep00x0_defconfig  | 7 +------
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/board/isee/igep00x0/Kconfig b/board/isee/igep00x0/Kconfig
index aa46882b05..597d6d92cf 100644
--- a/board/isee/igep00x0/Kconfig
+++ b/board/isee/igep00x0/Kconfig
@@ -9,4 +9,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "omap3_igep00x0"
 
+source "board/ti/common/Kconfig"
+
 endif
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index ba32609eab..2c2da1e385 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_TARGET_OMAP3_IGEP00X0=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -16,17 +17,11 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_ONENAND_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_CMD_SPL=y
-CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_ONENAND=y
-CONFIG_CMD_SPI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
 # CONFIG_CMD_UBIFS is not set
-- 
2.19.2