[U-Boot] [PATCH 10/10] imx8qxp: mek: update README
Peng Fan
peng.fan at nxp.com
Wed Dec 19 13:31:16 UTC 2018
Update README after we switch to use SPL
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
board/freescale/imx8qxp_mek/README | 8 +++++---
include/configs/imx8qxp_mek.h | 2 +-
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README
index e91e193d11..f32290e3a2 100644
--- a/board/freescale/imx8qxp_mek/README
+++ b/board/freescale/imx8qxp_mek/README
@@ -39,16 +39,18 @@ $ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin .
Build U-Boot
============
-
+$ export ATF_LOAD_ADDR=0x80000000
+$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qxp_mek_defconfig
-$ make
+$ make flash.bin
+$ dd if=u-boot.itb of=flash.bin bs=512 seek=528
Flash the binary into the SD card
=================================
Burn the flash.bin binary to SD card offset 32KB:
-$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32
+$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
Boot
====
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 5372e7f95e..312e30dc6c 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -10,7 +10,7 @@
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_TEXT_BASE 0x100000
+#define CONFIG_SPL_TEXT_BASE 0x0
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
--
2.14.1
More information about the U-Boot
mailing list