[U-Boot] [PATCH v2 5/6] mtd: nand: mxs_nand: report correct ECC parameters

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Report correct ECC parameters back to the stack. Do not report
bytes as we have it not immeaditly available and the Linux version
also does not report it. It seems to have no aversive effect.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

Changes in v2:
- Extend the patchset with "report correct ECC parameters" patch

 drivers/mtd/nand/mxs_nand.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 5b9398bd98..2d84bab717 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -1212,9 +1212,8 @@ void board_nand_init(void)
 
 	nand->ecc.layout	= &fake_ecc_layout;
 	nand->ecc.mode		= NAND_ECC_HW;
-	nand->ecc.bytes		= 9;
-	nand->ecc.size		= 512;
-	nand->ecc.strength	= 8;
+	nand->ecc.size		= nand_info->bch_geometry.ecc_chunk_size;
+	nand->ecc.strength	= nand_info->bch_geometry.ecc_strength;
 
 	/* second phase scan */
 	err = nand_scan_tail(mtd);
-- 
2.16.1