February 2018 Archives by author
Starting: Thu Feb 1 06:10:46 UTC 2018
Ending: Wed Feb 28 23:48:22 UTC 2018
Messages: 2372
- [U-Boot] [PATCH] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Faiz Abbas
- [U-Boot] [PATCH] configs: am335x_evm: Disable ISO and EFI partitions in SPL
Faiz Abbas
- [U-Boot] [PATCH] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Faiz Abbas
- [U-Boot] [PATCH v2] configs: am335x_evm: Disable ISO and EFI partitions in SPL
Faiz Abbas
- [U-Boot] [PATCH 0/2] Add DYNAMIC_CRC_TABLE to am335x_evm
Faiz Abbas
- [U-Boot] [PATCH 1/2] lib: Kconfig: Move DYNAMIC_CRC_TABLE to Kconfig
Faiz Abbas
- [U-Boot] [PATCH 2/2] configs: am335x_evm: Add DYNAMIC_CRC_TABLE
Faiz Abbas
- [U-Boot] [PATCH] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Faiz Abbas
- [U-Boot] [PATCH v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Faiz Abbas
- [U-Boot] [PATCH] mmc: Drop unnecessary case for mmc_probe()
Faiz Abbas
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Faiz Abbas
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Faiz Abbas
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Faiz Abbas
- [U-Boot] [PATCH] dfu: Limit dfu_mmc to non-SPL case
Faiz Abbas
- [U-Boot] [PATCH] dfu: Limit dfu_mmc to non-SPL case
Faiz Abbas
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Faiz Abbas
- [U-Boot] [PATCH] dfu: Build only RAM for DFU in SPL
Faiz Abbas
- [U-Boot] [PATCH v2] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Faiz Abbas
- [U-Boot] [PATCH] configs: am335x_evm_usbspl: Add CONFIG_SPL_NET_VCI_STRING
Faiz Abbas
- [U-Boot] [PATCH] spl: Kconfig: Rename SPL_USBETH_SUPPORT to SPL_USB_ETHER to match with the U-boot CONFIG
Faiz Abbas
- [U-Boot] [PATCH] mmc: Drop unnecessary case for mmc_probe()
Faiz Abbas
- [U-Boot] [PATCH v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Faiz Abbas
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Faiz Abbas
- [U-Boot] [PATCH v2 0/6] mtd: nand: mxs_nand: improve ECC support
Stefan Agner
- [U-Boot] [PATCH v2 1/6] Convert CONFIG_NAND_MXS to Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 2/6] mtd: nand: mxs_nand: use self init
Stefan Agner
- [U-Boot] [PATCH v2 3/6] mtd: nand: mxs_nand: allow to enable BBT support
Stefan Agner
- [U-Boot] [PATCH v2 4/6] mtd: nand: mxs_nand: use structure for BCH geometry
Stefan Agner
- [U-Boot] [PATCH v2 5/6] mtd: nand: mxs_nand: report correct ECC parameters
Stefan Agner
- [U-Boot] [PATCH v2 6/6] mtd: nand: mxs_nand: add minimal ECC support
Stefan Agner
- [U-Boot] [PATCH 0/4] arm: imx: convert MX23/28 and MXS NAND to Kconfig
Stefan Agner
- [U-Boot] [PATCH 1/4] arm: imx: mx23: Move MX23 selection to Kconfig
Stefan Agner
- [U-Boot] [PATCH 2/4] arm: imx: mx28: Move MX28 selection to Kconfig
Stefan Agner
- [U-Boot] [PATCH 3/4] spl: use ARCH_MX23/28 to specify SPL_LDSCRIPT
Stefan Agner
- [U-Boot] [PATCH 4/4] Convert CONFIG_NAND_MXS to Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 0/4] arm: imx: convert MX23/28 and MXS NAND to Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 1/4] arm: imx: mx23: Move MX23 selection to Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 2/4] arm: imx: mx28: Move MX28 selection to Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 3/4] spl: use ARCH_MX23/28 to specify SPL_LDSCRIPT
Stefan Agner
- [U-Boot] [PATCH v2 4/4] Convert CONFIG_NAND_MXS to Kconfig
Stefan Agner
- [U-Boot] [PATCH] Fix --noheader on fw_printenv
Stefan Agner
- [U-Boot] [PATCH 1/2] usb: gadget: sdp: add missing line breaks
Stefan Agner
- [U-Boot] [PATCH 1/2] mtd: nand: tegra: convert to driver model and live tree
Stefan Agner
- [U-Boot] [PATCH v3 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Artturi Alm
- [U-Boot] [PATCH] board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit
Stefano Babic
- [U-Boot] [PATCH V3 2/3] imx: mx7: psci: add system reset support
Stefano Babic
- [U-Boot] [PATCH V3 3/3] imx: mx7: psci: add system power off support
Stefano Babic
- [U-Boot] [PATCH 1/3] configs: enable spl support wrt env device
Stefano Babic
- [U-Boot] [PATCH 2/3] configs: icore: enable nand on mmc defconfig
Stefano Babic
- [U-Boot] [PATCH 3/3] i.MX: nand: add nandbcb update command
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PATCHv2 00/15] Updates / improvements to bx50v3 support
Stefano Babic
- [U-Boot] [PATCH v3 0/4] arm: imx53: remove usage of mx53_dram_size
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6memcal: launder through savedefconfig
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6memcal: enable SDP support
Stefano Babic
- [U-Boot] [PATCH] mx6memcal: fix comment in board header file
Stefano Babic
- [U-Boot] [PATCH V2 1/4] mmc: fsl_esdhc: add strobe and tuning entry
Stefano Babic
- [U-Boot] [PATCH V2 2/4] ARM: dts: add pinmux and tuning settings for HS200/SDR104
Stefano Babic
- [U-Boot] [PATCH V2 3/4] mmc: fsl_esdhc: support SDR104 and HS200
Stefano Babic
- [U-Boot] [PATCH V2 4/4] imx: mx7dsabresd: enable UHS and HS200
Stefano Babic
- [U-Boot] [PATCH] mx8mqevk: Update README with additional info
Stefano Babic
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Stefano Babic
- [U-Boot] [PATCH] board: tbs2910: add private imx config
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE
Stefano Babic
- [U-Boot] [PATCH v2] mx6sabresd: Add fastboot support
Stefano Babic
- [U-Boot] [PATCH] arm: dts: imx6ull: move input include to base device tree
Stefano Babic
- [U-Boot] [PATCH] doc: mxc_hab: Improve the config option list
Stefano Babic
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Stefano Babic
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] configs: imx6q_logic: Move CONFIG_MXC_UART to Kconfig
Stefano Babic
- [U-Boot] [PATCH] mx6: fix MAINTAINERS for Engicam i.CoreM6 1.5 MIPI
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Stefano Babic
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Stefano Babic
- [U-Boot] [PATCH] RPi: Add myself as board maintainer
Stefano Babic
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Stefano Babic
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
Stefano Babic
- [U-Boot] [PATCH] mx6sabresd: Select the CONFIG_EFI_PARTITION option
Stefano Babic
- [U-Boot] [PATCH] Revert "mx6: ddr: Allow changing REFSEL and REFR fields"
Stefano Babic
- [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)
Stefano Babic
- [U-Boot] [PATCH] bootcount: flush after storing the bootcounter
Stefano Babic
- [U-Boot] [PATCH] bootcount: flush after storing the bootcounter
Stefano Babic
- [U-Boot] [PATCH 1/5] imx: hab: Keep CAAM clock enabled after authenticating additional images
Stefano Babic
- [U-Boot] [PATCH 2/3] imx6: engicam: Drop SPL_EXT_SUPPORT
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPL
Stefano Babic
- [U-Boot] [PATCH v3] imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Stefano Babic
- [U-Boot] [PULL][Update] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 0/3] add inital SF tests
Liam Beguin
- [U-Boot] [PATCH 1/3] test/py: README: fix typo
Liam Beguin
- [U-Boot] [PATCH 2/3] test/py: README: add HOSTNAME to PYTHONPATH
Liam Beguin
- [U-Boot] [PATCH 3/3] test/py: add spi_flash tests
Liam Beguin
- [U-Boot] [PATCH 0/3] add inital SF tests
Liam Beguin
- [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation
Karl Beldan
- [U-Boot] [PATCH] arm64: show_regs: Dump the LRs HW values
Karl Beldan
- [U-Boot] [PATCH] sunxi: video: lcdc: fix HSYNC and VSYNC polarity
Giulio Benetti
- [U-Boot] [PATCH] sunxi: video: lcdc: fix HSYNC and VSYNC polarity
Giulio Benetti
- [U-Boot] [PATCH 0/3] Fix potential buffer overruns in TPM driver
Jeremy Boone
- [U-Boot] [PATCH 1/3] STMicro TPM: Fix potential buffer overruns
Jeremy Boone
- [U-Boot] [PATCH 2/3] Infineon TPM: Fix potential buffer overruns
Jeremy Boone
- [U-Boot] [PATCH 3/3] Atmel TPM: Fix potential buffer overruns
Jeremy Boone
- [U-Boot] [PATCH v2 05/20] spl: nand: sunxi: introduce the nand_wait_int() helper
Boris Brezillon
- [U-Boot] [PATCH v2 09/20] spl: nand: sunxi: ensure enough time has passed after changing the column
Boris Brezillon
- [U-Boot] [PATCH v2 00/20] Bring NAND support to Nintendo NES Classic
Boris Brezillon
- [U-Boot] [PATCH v2 00/20] Bring NAND support to Nintendo NES Classic
Boris Brezillon
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Boris Brezillon
- [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
Alexey Brodkin
- [U-Boot] [PATCH] Remove more checks for CONFIG_SYS_TEXT_BASE being set
Alexey Brodkin
- [U-Boot] [PATCH] board_f: Show only .text location in display_text_info()
Alexey Brodkin
- [U-Boot] [PATCH] usb: dwc2: Fix logic for setup of GUSBCFG->ULPI_UTMI_Sel bit
Alexey Brodkin
- [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
Alexey Brodkin
- [U-Boot] [PATCH] usb: dwc2: Fix logic for setup of GUSBCFG->ULPI_UTMI_Sel bit
Alexey Brodkin
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Alexey Brodkin
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Alexey Brodkin
- [U-Boot] [PATCH] arc: Fix final linkage with Elf32 tools
Alexey Brodkin
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH] board_f: Only reserve memory for U-Boot if we're going to relocate
Alexey Brodkin
- [U-Boot] [PATCH] arc: Introduce a possibility to not relocate U-boot
Alexey Brodkin
- [U-Boot] [PATCH] usb: dwc2: Reduce data buffer size to 16kB
Alexey Brodkin
- [U-Boot] [PATCH] Makefile: Don't mess with .text section location for selected arches
Alexey Brodkin
- [U-Boot] [PATCH] arc: Fine-tune implementation of memory barriers
Alexey Brodkin
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Alexey Brodkin
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Alexey Brodkin
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Alexey Brodkin
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Alexey Brodkin
- [U-Boot] [PATCH] usb: dwc2: Allow selection of data buffer size
Alexey Brodkin
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
Rick Bronson
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Curt Brune
- [U-Boot] [PATCH 1/8] mach-stm32: Add get_cpu_id support
Patrice CHOTARD
- [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs
Patrice CHOTARD
- [U-Boot] [PATCH 6/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()
Patrice CHOTARD
- [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs
Patrice CHOTARD
- [U-Boot] [PATCH v2 1/3] mach-stm32: Add set_env_soc_name support
Patrice CHOTARD
- [U-Boot] [PATCH v2 1/3] mach-stm32: Add set_env_soc_name support
Patrice CHOTARD
- [U-Boot] [PATCH v2 0/3] Add set_env_soc_name() for STM32 SoCs
Patrice CHOTARD
- [U-Boot] [PATCH] NET: designware: fix clock enable
Patrice CHOTARD
- [U-Boot] [PATCH 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/
Patrice CHOTARD
- [U-Boot] [PATCH 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/
Patrice CHOTARD
- [U-Boot] [RESEND PATCH 2/2] net: designware: add clock support
Patrice CHOTARD
- [U-Boot] [PATCH] ARM: dts: Add support for stm32f746-evaluation board support
Patrice CHOTARD
- [U-Boot] UDP packet sender
Gaëtan Carlier
- [U-Boot] [PATCH v7 2/3] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/3] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v8 0/4] Generic firmware loader
Chee, Tien Fong
- [U-Boot] [PATCH v8 0/4] Generic firmware loader
Chee, Tien Fong
- [U-Boot] [PATCH v8 3/4] cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v9 4/4] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH 0/2] Android and arm64 improvement
Bin Chen
- [U-Boot] [PATCH 0/2] Android and arm64 improvement
Bin Chen
- [U-Boot] [PATCH] ARM: image: indent with tab instead of 4 spaces
Bin Chen
- [U-Boot] [PATCH] cmd: booti: fix invalid image address in debug message
Bin Chen
- [U-Boot] [PATCH v2 4/9] mmc: reworked version lookup in mmc_startup_v4
Jaehoon Chung
- [U-Boot] [PATCH v1 1/2] mmc: Fix bug in sd_set_card_speed()
Jaehoon Chung
- [U-Boot] [PATCH 10/10] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Jaehoon Chung
- [U-Boot] [PATCH v1 2/2] mmc: fix bug in mmc_startup_v4()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: use pr_* log functions
Jaehoon Chung
- [U-Boot] [PATCH v3 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jaehoon Chung
- [U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Jaehoon Chung
- [U-Boot] [PATCH v1 1/2] mmc: Fix bug in sd_set_card_speed()
Jaehoon Chung
- [U-Boot] [PATCH v1 2/2] mmc: fix bug in mmc_startup_v4()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Fix uninitialised priv member
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Jaehoon Chung
- [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix eMMC v5.1 incorrect version detection
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: synchronize the sequence with enum bus_mode in mmc.h
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Drop unnecessary case for mmc_probe()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Jaehoon Chung
- [U-Boot] [PATCH v3 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Jaehoon Chung
- [U-Boot] [PATCH v1 3/4] mmc: omap_hsmmc: compile out ADMA support for am33xx and omap34xx
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Fix a compile error relevant to unused-function
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Fix a compile error relevant to unused-function
Jaehoon Chung
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Jaehoon Chung
- [U-Boot] [PATCH v2] mmc: uniphier-sd: Fix a compile error relevant to unused-function
Jaehoon Chung
- [U-Boot] [PATCH v2 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock
Jaehoon Chung
- [U-Boot] [UBOOT PATCH 2/2] mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
Jaehoon Chung
- [U-Boot] [PATCH v2 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Jaehoon Chung
- [U-Boot] [PATCH v2 2/4] mmc: omap_hsmmc: compile out write support if not needed
Jaehoon Chung
- [U-Boot] [PATCH v2 3/4] mmc: omap_hsmmc: make it possible to compile out ADMA support
Jaehoon Chung
- [U-Boot] [PATCH v2 4/4] mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
Jaehoon Chung
- [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1
Jaehoon Chung
- [U-Boot] UART
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] U-Boot
Mariano Coromac
- [U-Boot] [PATCH v2 1/3] mach-stm32: Add set_env_soc_name support
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig
Sriram Dash
- [U-Boot] [PATCH 2/2] drivers: i2c: mxc: Update support to 8 I2C controllers
Sriram Dash
- [U-Boot] [PATCH 1/3] ARM: Kconfig: Move TI_SECURE_DEVICE to a common area
Andrew F. Davis
- [U-Boot] [PATCH 2/3] env: Fix missed getenv_ulong to env_get_ulong conversion
Andrew F. Davis
- [U-Boot] [PATCH 3/3] defconfig: k2x_hs_evm: Re-enable TI_SECURE_DEVICE in HS K2x parts
Andrew F. Davis
- [U-Boot] [U-Boot PATCH 0/2] Adds support for secure boot on TCI6630K2L HS devices
Andrew F. Davis
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Andrew F. Davis
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Andrew F. Davis
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Andrew F. Davis
- [U-Boot] Where is the edge between a loader and (microkernel) OS?
Wolfgang Denk
- [U-Boot] PPC405EXr / PPC460EX user manuals
Wolfgang Denk
- [U-Boot] [PATCH] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Wolfgang Denk
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Wolfgang Denk
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Wolfgang Denk
- [U-Boot] [RFC] Make U-Boot log great again
Wolfgang Denk
- [U-Boot] [RFC] Make U-Boot log great again
Wolfgang Denk
- [U-Boot] [RFC] Make U-Boot log great again
Wolfgang Denk
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Wolfgang Denk
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Wolfgang Denk
- [U-Boot] [PATCH 1/3] Interface changes for adding TCP
Wolfgang Denk
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Wolfgang Denk
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Wolfgang Denk
- [U-Boot] [PATCH v2 11/20] sunxi: spl: deassert the NAND controller reset line
Wolfgang Denk
- [U-Boot] [PATCH] m68k: fix mcf5441x total interrupt number
Angelo Dureghello
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Angelo Dureghello
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Angelo Dureghello
- [U-Boot] FEC Clock
Fabio Estevam
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Fabio Estevam
- [U-Boot] [PATCH 1/4] arm: imx: mx23: Move MX23 selection to Kconfig
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] i.MX6: nand: add nandbcb update command
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command
Fabio Estevam
- [U-Boot] [PATCH] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Fabio Estevam
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Fabio Estevam
- [U-Boot] [PATCH v3] imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Fabio Estevam
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Fabio Estevam
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Fabio Estevam
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
Fabio Estevam
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
Fabio Estevam
- [U-Boot] [PATCH] mx6sabresd: Select the CONFIG_EFI_PARTITION option
Fabio Estevam
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
Fabio Estevam
- [U-Boot] [PATCH 1/5] imx: hab: Keep CAAM clock enabled after authenticating additional images
Fabio Estevam
- [U-Boot] [PATCH 2/5] imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB authenticate function.
Fabio Estevam
- [U-Boot] [PATCH 3/5] imx: hab: Check if CSF is valid before authenticating image
Fabio Estevam
- [U-Boot] [PATCH 4/5] imx: hab: Check if CSF contains deprecated commands
Fabio Estevam
- [U-Boot] [PATCH 5/5] arm: imx: hab: Define HAB_RVT_BASE according to the processor version
Fabio Estevam
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Fabio Estevam
- [U-Boot] [PATCH 1/2] doc: mxc_hab: Move HAB related info to the appropriate doc
Fabio Estevam
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Fabio Estevam
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Fabio Estevam
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Fabio Estevam
- [U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues
Kyle Evans
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Peng Fan
- [U-Boot] U-Boot
Nicolas Ferre
- [U-Boot] U-Boot
Nicolas Ferre
- [U-Boot] [PATCH 0/2] .travis.yml changes for building/testing xtensa port
Max Filippov
- [U-Boot] [PATCH 1/2] .travis.yml: download xtensa prebuilt toolchain
Max Filippov
- [U-Boot] [PATCH 2/2] .travis.yml: test xtensa xtfpga board in QEMU
Max Filippov
- [U-Boot] [PATCH v2 0/3] .travis.yml changes for building/testing xtensa port
Max Filippov
- [U-Boot] [PATCH v2 1/3] .travis.yml: download xtensa prebuilt toolchain
Max Filippov
- [U-Boot] [PATCH v2 2/3] xtfpga: enable hush parser
Max Filippov
- [U-Boot] [PATCH v2 3/3] .travis.yml: test xtensa xtfpga board in QEMU
Max Filippov
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Max Filippov
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Max Filippov
- [U-Boot] [PATCH 0/2] xtensa: clean up SYS_MONITOR_LEN/SYS_TEXT_ADDR
Max Filippov
- [U-Boot] [PATCH 1/2] board/cadence/xtfpga: move SYS_MONITOR_LEN to Kconfig
Max Filippov
- [U-Boot] [PATCH 2/2] xtensa: clean up CONFIG_SYS_TEXT_ADDR
Max Filippov
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
Adam Ford
- [U-Boot] [PATCH 2/2] Remove config_distro_defaults.h
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_APBH_DMA et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] configs: imx6q_logic: Move CONFIG_MXC_UART to Kconfig
Adam Ford
- [U-Boot] [PATCH] configs: imx6q_logic: Move CONFIG_PHY_SMSC to defconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_MXC_GPIO to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_APBH_DMA et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_APBH_DMA et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V2 2/2] Remove config_distro_defaults.h
Adam Ford
- [U-Boot] [PATCH V2 1/2] Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_APBH_DMA et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V3] Convert CONFIG_APBH_DMA et al to Kconfig
Adam Ford
- [U-Boot] Unused CONFIG_SYS_MAXARGS?
Adam Ford
- [U-Boot] CONFIG_CMD_KGDB unused?
Adam Ford
- [U-Boot] CONFIG_RANDOM_UUID and CONFIG_CMD_UUID unused?
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG LIB_HW_RAND to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert LIB_UUID to Kconfig
Adam Ford
- [U-Boot] [PATCH] Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig
Adam Ford
- [U-Boot] [PATCH] configs: Migrate CONFIG_SYS_TEXT_BASE
Adam Ford
- [U-Boot] [PATCH] configs: Migrate CONFIG_SYS_TEXT_BASE
Adam Ford
- [U-Boot] [PATCH v3 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Adam Ford
- [U-Boot] [PATCH v3 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Adam Ford
- [U-Boot] [PATCH v1 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock
Adam Ford
- [U-Boot] [PATCH] omap3_logic: Fix Environmental location
Adam Ford
- [U-Boot] [PATCH v2 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock
Adam Ford
- [U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues
kevans at FreeBSD.org
- [U-Boot] [PATCH 1/2] net: phy: Add PHY_RTL8211E_PINE64_GIGABIT_FIX for realtek phys
kevans at FreeBSD.org
- [U-Boot] [PATCH 2/2] Configs: Use the newly added PHY_RTL8211E_PINE64_GIGABIT_FIX
kevans at FreeBSD.org
- [U-Boot] Regression: gpio: pca953x_gpio: Make live-tree compatible
Martin Fuzzey
- [U-Boot] How to test new bootloaders on Jetson TX1?
Andreas Färber
- [U-Boot] How to test new bootloaders on Jetson TX1?
Andreas Färber
- [U-Boot] How to test new bootloaders on Jetson TX1?
Andreas Färber
- [U-Boot] How to test new bootloaders on Jetson TX1?
Andreas Färber
- [U-Boot] How to test new bootloaders on Jetson TX1? - ATF
Andreas Färber
- [U-Boot] How to test new bootloaders on Jetson TX1? - ATF
Andreas Färber
- [U-Boot] [PATCH 3/5] zynq: Support CPU info display
Ezequiel Garcia
- [U-Boot] [PATCH] board_f: Show only .text location in display_text_info()
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 1/2] sandbox: Correct dtc warning in /chosen node
Simon Glass
- [U-Boot] [PATCH 2/2] sandbox: Rename 'num-gpios' property to avoid dtc warning
Simon Glass
- [U-Boot] [PATCH v2] sandbox: Add 64-bit sandbox
Simon Glass
- [U-Boot] Please pull u-boot-dm (take 2)
Simon Glass
- [U-Boot] [PATCH v4 2/2] efi_selftest: provide a test for block io
Simon Glass
- [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation
Simon Glass
- [U-Boot] [PATCH v3 1/3] drivers/ddr/fsl: Fix DDR4 RDIMM support
Simon Glass
- [U-Boot] [PATCH 11/16] efi_loader: implement DisconnectController
Simon Glass
- [U-Boot] [PATCH 2/4] buildman: add option -E for treating compiler warnings as errors
Simon Glass
- [U-Boot] [PATCH 3/4] travis.yml: fix 'set +e' in build script
Simon Glass
- [U-Boot] [PATCH 4/4] travis.yml: run buildman with option -E
Simon Glass
- [U-Boot] [PATCH] board_f: Only reserve memory for U-Boot if we're going to relocate
Simon Glass
- [U-Boot] [PATCH] arc: Introduce a possibility to not relocate U-boot
Simon Glass
- [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang
Simon Glass
- [U-Boot] [PATCH v3 1/4] dm: video: show correct colors in graphical console
Simon Glass
- [U-Boot] [PATCH v3 2/4] dm: video: correctly clean background in 16bit mode
Simon Glass
- [U-Boot] [PATCH v3 3/4] dm: video: use constants to refer to colors
Simon Glass
- [U-Boot] [PATCH v3 4/4] dm: video: support increased intensity (bold)
Simon Glass
- [U-Boot] Uboot as x86_64 EFI payload
Simon Glass
- [U-Boot] About convert to LIVE DT
Simon Glass
- [U-Boot] Uboot as x86_64 EFI payload
Simon Glass
- [U-Boot] [PATCH v3 3/4] dm: video: use constants to refer to colors
Simon Glass
- [U-Boot] [PATCH v4 2/2] efi_selftest: provide a test for block io
Simon Glass
- [U-Boot] [PATCH v4 4/4] dm: video: support increased intensity (bold)
Simon Glass
- [U-Boot] About convert to LIVE DT
Simon Glass
- [U-Boot] [PATCH] core: add ofnode_get_by_phandle() api
Simon Glass
- [U-Boot] [PATCH v4 3/4] dm: video: use constants to refer to colors
Simon Glass
- [U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api
Simon Glass
- [U-Boot] [PATCH v1 2/2] mmc: fix bug in mmc_startup_v4()
Simon Glass
- [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi
Simon Glass
- [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi
Simon Glass
- [U-Boot] U-Boot
Simon Glass
- [U-Boot] U-Boot
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v3 00/21] efi: Enable basic sandbox support for EFI loader
Simon Glass
- [U-Boot] [PATCH v3 01/21] efi: Init the 'rows' and 'cols' variables
Simon Glass
- [U-Boot] [PATCH v3 02/21] efi: Update efi_smbios_register() to return error code
Simon Glass
- [U-Boot] [PATCH v3 03/21] efi: Move the init check inside efi_init_obj_list()
Simon Glass
- [U-Boot] [PATCH v3 04/21] efi: Add error checking for efi_init_obj_list()
Simon Glass
- [U-Boot] [PATCH v3 05/21] efi: Add a TODO to efi_init_obj_list()
Simon Glass
- [U-Boot] [PATCH v3 06/21] efi: Correct header order in efi_memory
Simon Glass
- [U-Boot] [PATCH v3 07/21] efi: sandbox: Adjust memory usage for sandbox
Simon Glass
- [U-Boot] [PATCH v3 08/21] sandbox: smbios: Update to support sandbox
Simon Glass
- [U-Boot] [PATCH v3 09/21] sandbox: Add a setjmp() implementation
Simon Glass
- [U-Boot] [PATCH v3 10/21] efi: sandbox: Add required linker sections
Simon Glass
- [U-Boot] [PATCH v3 11/21] efi: sandbox: Add distroboot support
Simon Glass
- [U-Boot] [PATCH v3 12/21] Define board_quiesce_devices() in a shared location
Simon Glass
- [U-Boot] [PATCH v3 13/21] Add a comment for board_quiesce_devices()
Simon Glass
- [U-Boot] [PATCH v3 14/21] efi: sandbox: Add relocation constants
Simon Glass
- [U-Boot] [PATCH v3 15/21] efi: Add a comment about duplicated ELF constants
Simon Glass
- [U-Boot] [PATCH v3 16/21] efi: sandbox: Enable EFI loader builder for sandbox
Simon Glass
- [U-Boot] [PATCH v3 17/21] efi: Split out test init/uninit into functions
Simon Glass
- [U-Boot] [PATCH v3 18/21] efi: sandbox: Add a simple 'bootefi test' command
Simon Glass
- [U-Boot] [PATCH v3 19/21] efi: Reorder code in do_bootefi_exec()
Simon Glass
- [U-Boot] [PATCH v3 20/21] efi: Create a function to set up for running EFI code
Simon Glass
- [U-Boot] [PATCH v3 21/21] efi: Rename bootefi_test_finish() to bootefi_run_finish()
Simon Glass
- [U-Boot] [PATCH v2 16/16] efi: sandbox: Add a simple 'bootefi test' command
Simon Glass
- [U-Boot] [PATCH v2 01/16] efi: Update efi_smbios_register() to return error code
Simon Glass
- [U-Boot] [PATCH v2 07/16] sandbox: smbios: Update to support sandbox
Simon Glass
- [U-Boot] [PATCH v3 00/21] efi: Enable basic sandbox support for EFI loader
Simon Glass
- [U-Boot] [RFC v2 02/15] dma: add channels support
Simon Glass
- [U-Boot] [RFC v2 01/15] dma: move dma_ops to dma-uclass.h
Simon Glass
- [U-Boot] [PATCH 1/2] mtd: nand: tegra: convert to driver model and live tree
Simon Glass
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Simon Glass
- [U-Boot] [RFC v3 01/15] dma: move dma_ops to dma-uclass.h
Simon Glass
- [U-Boot] [RFC v3 02/15] dma: add channels support
Simon Glass
- [U-Boot] [PATCH] arc: Introduce a possibility to not relocate U-boot
Simon Glass
- [U-Boot] [PATCH] board_f: Only reserve memory for U-Boot if we're going to relocate
Simon Glass
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Simon Glass
- [U-Boot] [PATCH 1/5] core: ofnode: add ofnode_get_parent function
Simon Glass
- [U-Boot] [PATCH v1 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Simon Glass
- [U-Boot] [PATCH 2/2] usb: kbd: implement special keys
Simon Glass
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Simon Glass
- [U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api
Simon Glass
- [U-Boot] [PATCH] rockchip: add text_offset to kernel_addr_r on aarch64 platforms
Klaus Goger
- [U-Boot] [PATCH] fpga: Simplify error path in fpga_add
Simon Goldschmidt
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Simon Goldschmidt
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Simon Goldschmidt
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Simon Goldschmidt
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Simon Goldschmidt
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] env: Fix env_load_location
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Simon Goldschmidt
- [U-Boot] [PATCH 0/2] arm: socfpga: Kconfig cleanups
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] arm: socfpga: use imply instead of select where applicable
Simon Goldschmidt
- [U-Boot] [PATCH v2] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Simon Goldschmidt
- [U-Boot] [PATCH] arm: update Kconfig help for ENABLE_ARM_SOC_BOOT0_HOOK
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] fix spelling of 'functions' in 2 places (was 'funtcions')
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Simon Goldschmidt
- [U-Boot] [PATCH v3] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] arm: socfpga: cyclone5: Ensure spi-flash in the compatible string
Simon Goldschmidt
- [U-Boot] [RFC] Make U-Boot log great again
Simon Goldschmidt
- [U-Boot] [RFC] Make U-Boot log great again
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
Simon Goldschmidt
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Alexander Graf
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Alexander Graf
- [U-Boot] [PATCH] serial: Make full device search optional
Alexander Graf
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: add missing runtime services stubs
Alexander Graf
- [U-Boot] [PATCH 1/1][for v2018.03] efi_loader: correct efi_disk_register
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi
Alexander Graf
- [U-Boot] [PULL] efi v2018.03 patch queue 2018-02-10
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi
Alexander Graf
- [U-Boot] [PATCH] RPi: Add myself as board maintainer
Alexander Graf
- [U-Boot] [PATCH] serial: Make full device search optional
Alexander Graf
- [U-Boot] [PATCH] RPi: Add myself as board maintainer
Alexander Graf
- [U-Boot] [PATCH] efi_stub: Fix GDT_NOTSYS check
Alexander Graf
- [U-Boot] [PATCH] serial: Make full device search optional
Alexander Graf
- [U-Boot] [PATCH 1/3] cmd: cbfs: fix reading the end_of_rom pointer for 64bit archs
Alexander Graf
- [U-Boot] [PATCH 2/3] fs: cbfs: fix locating the cbfs header
Alexander Graf
- [U-Boot] [PATCH 3/3] cbfs: add support for cbfs header components
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Fix partition offsets
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [PATCH v2 10/26] mmc: refactor SD startup to make it easier to support new modes
Jonathan Gray
- [U-Boot] [PATCH v3 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [PATCH v2 1/1] efi_loader: correct efi_disk_register
Jonathan Gray
- [U-Boot] [PATCH v1 1/2] mmc: Fix bug in sd_set_card_speed()
Jonathan Gray
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Jonathan Gray
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Jonathan Gray
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Jonathan Gray
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Jonathan Gray
- [U-Boot] Please fix ls1046ardb
Jonathan Gray
- [U-Boot] [RESEND PATCH 2/2] net: designware: add clock support
Jonathan Gray
- [U-Boot] [RESEND PATCH 2/2] net: designware: add clock support
Jonathan Gray
- [U-Boot] [PATCH] tools/kwbimage: fix LibreSSL build
Jonathan Gray
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Jonathan Gray
- [U-Boot] [RESEND PATCH v3 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Ruchika Gupta
- [U-Boot] [PATCH] armv8: sec_firmware: Remove JR3 from device tree node in all cases
Ruchika Gupta
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Anatolij Gustschin
- [U-Boot] [PATCH 1/5] core: ofnode: add ofnode_get_parent function
Anatolij Gustschin
- [U-Boot] [PATCH 3/5] rockchip: video: rk_hdmi: migrate to livetree
Anatolij Gustschin
- [U-Boot] [PATCH 4/5] rockchip: video: rk_vop: migrate to livetree
Anatolij Gustschin
- [U-Boot] [PATCH 5/5] rockchip: video: update MAINTAINERS
Anatolij Gustschin
- [U-Boot] [PATCH 0/5] rockchip: video: migrate RK3399 w/ HDMI to livetree
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] sunxi: video: lcdc: fix HSYNC and VSYNC polarity
Anatolij Gustschin
- [U-Boot] Where is the edge between a loader and (microkernel) OS
Duncan Hare
- [U-Boot] TCP & Overrrun
Duncan Hare
- [U-Boot] TCP & Overrrun
Duncan Hare
- [U-Boot] TCP & Overrrun
Duncan Hare
- [U-Boot] TCP Patch Set
Duncan Hare
- [U-Boot] [PATCH] arm/PSCI: support PSCI versions greater than 1.0
Andre Heider
- [U-Boot] [PATCH 1/2] usb: gadget: sdp: add missing line breaks
Andre Heider
- [U-Boot] [PATCH 2/2] usb: gadget: sdp: fix pointer casts for 64bit archs
Andre Heider
- [U-Boot] [PATCH 1/3] cmd: cbfs: fix reading the end_of_rom pointer for 64bit archs
Andre Heider
- [U-Boot] [PATCH 2/3] fs: cbfs: fix locating the cbfs header
Andre Heider
- [U-Boot] [PATCH 3/3] cbfs: add support for cbfs header components
Andre Heider
- [U-Boot] [PATCH 2/2] usb: gadget: sdp: fix pointer casts for 64bit archs
Andre Heider
- [U-Boot] [PATCH v2 2/2] usb: gadget: sdp: fix pointer cast warnings for 64bit archs
Andre Heider
- [U-Boot] UDP packet sender
Joe Hershberger
- [U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus
Joe Hershberger
- [U-Boot] [PATCH] NET: designware: fix clock enable
Joe Hershberger
- [U-Boot] [PATCH] Kconfig: net: phylib: Phylib should depends on NET
Joe Hershberger
- [U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus
Joe Hershberger
- [U-Boot] TCP & Overrrun
Joe Hershberger
- [U-Boot] TCP & Overrrun
Joe Hershberger
- [U-Boot] TCP & Overrrun
Joe Hershberger
- [U-Boot] [PATCH] net: ravb: Initialize PHY in probe() once
Joe Hershberger
- [U-Boot] [RESEND PATCH v2 5/7] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type
Joe Hershberger
- [U-Boot] [PATCH] net: ravb: Initialize PHY in probe() once
Joe Hershberger
- [U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus
Joe Hershberger
- [U-Boot] [PATCH] net: e1000: Fix e1000_igb semaphore handling
Joe Hershberger
- [U-Boot] [PATCH] net: Remove Xilinx ll_temac driver
Joe Hershberger
- [U-Boot] [PATCH] net: ravb: staticize ravb_start
Joe Hershberger
- [U-Boot] [PATCH 1/7] net: sh_eth: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2
Joe Hershberger
- [U-Boot] [PATCH 2/7] net: sh_eth: Pass sh_eth_dev around
Joe Hershberger
- [U-Boot] [PATCH 3/7] net: sh_eth: Split sh_eth_recv
Joe Hershberger
- [U-Boot] [PATCH 4/7] net: sh_eth: Separate out MAC address programming
Joe Hershberger
- [U-Boot] [PATCH 5/7] net: sh_eth: Split sh_eth_init
Joe Hershberger
- [U-Boot] [PATCH 6/7] net: sh_eth: Clump legacy functions together
Joe Hershberger
- [U-Boot] [PATCH 7/7] net: sh_eth: Add DM and DT support
Joe Hershberger
- [U-Boot] [Patch] for drivers/net/phy/smsc.c to support SMSC LAN8741
Joe Hershberger
- [U-Boot] [PATCH 3/5] net: sh_eth: Fix unused variable warnings
Joe Hershberger
- [U-Boot] [PATCH 1/4] net: sh_eth: Zap port variable
Joe Hershberger
- [U-Boot] [PATCH 2/4] net: sh_eth: Return directly from sh_eth_recv_start
Joe Hershberger
- [U-Boot] [PATCH 3/4] net: sh_eth: Fix checkpatch warning
Joe Hershberger
- [U-Boot] [PATCH 4/4] net: sh_eth: Fix DT base address fetching
Joe Hershberger
- [U-Boot] [PATCH] net: zynq_gem: Dont run any phy detection logic for GMII case
Joe Hershberger
- [U-Boot] TCP Patch Set
Joe Hershberger
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Joe Hershberger
- [U-Boot] [Patch] for drivers/net/phy/smsc.c to support SMSC LAN8741
Joe Hershberger
- [U-Boot] [PATCH 1/3] Interface changes for adding TCP
Joe Hershberger
- [U-Boot] [PATCH 1/3] Interface changes for adding TCP
Joe Hershberger
- [U-Boot] [PATCH 2/3] TCP code. All is new.
Joe Hershberger
- [U-Boot] [PATCH 3/3] wget.c, wget.h and modified tftp.c.
Joe Hershberger
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Joe Hershberger
- [U-Boot] [PATCH] board: freescale: ls1012a: fix RGMII TX-delay issue
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: phy: Add PHY_RTL8211E_PINE64_GIGABIT_FIX for realtek phys
Joe Hershberger
- [U-Boot] [PATCH 2/2] Configs: Use the newly added PHY_RTL8211E_PINE64_GIGABIT_FIX
Joe Hershberger
- [U-Boot] [PATCH v2 01/13] drivers: net: phy: Fix aquantia compilation with DM
Joe Hershberger
- [U-Boot] [PATCH v2 02/13] armv8: fsl-layerscape: Add support of GPIO structure
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH v2 03/13] drivers: net: pfe_eth: LS1012A PFE driver introduction
Joe Hershberger
- [U-Boot] [PATCH v2 04/13] drivers: net: pfe_eth: provide pfe commands
Joe Hershberger
- [U-Boot] [PATCH v2 05/13] drivers: net: pfe_eth: LS1012A PFE headers
Joe Hershberger
- [U-Boot] [PATCH v2 06/13] board: freescale: ls1012aqds: enable network support on ls1012aqds
Joe Hershberger
- [U-Boot] [PATCH v2 07/13] board: freescale: ls1012afrdm: enable network support on ls1012afrdm
Joe Hershberger
- [U-Boot] [PATCH v2 08/13] board: freescale: ls1012ardb: enable network support on ls1012ardb
Joe Hershberger
- [U-Boot] [PATCH v2 09/13] board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb
Joe Hershberger
- [U-Boot] [PATCH v2 10/13] armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure
Joe Hershberger
- [U-Boot] [PATCH v2 11/13] armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECC
Joe Hershberger
- [U-Boot] [PATCH v2 12/13] armv8: layerscape: csu: enable ns access to PFE registers
Joe Hershberger
- [U-Boot] [PATCH v2 13/13] configs: ls1012a: add pfe configuration for LS1012A
Joe Hershberger
- [U-Boot] [PATCH] net: sun8i_emac: Fix PHY initialization
Joe Hershberger
- [U-Boot] [PATCH v2 06/13] board: freescale: ls1012aqds: enable network support on ls1012aqds
Joe Hershberger
- [U-Boot] [PATCH v2 13/13] configs: ls1012a: add pfe configuration for LS1012A
Joe Hershberger
- [U-Boot] [PATCH v2 4/9] mmc: reworked version lookup in mmc_startup_v4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/2]
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/2] mmc: Fix bug in sd_set_card_speed()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/2] mmc: fix bug in mmc_startup_v4()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [ANN] U-Boot v2018.03-rc3 released
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/4] mmc: omap_hsmmc: compile out write support if not needed
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/4] mmc: omap_hsmmc: compile out ADMA support for am33xx and omap34xx
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 4/4] mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 2/4] mmc: omap_hsmmc: compile out write support if not needed
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/4] mmc: omap_hsmmc: make it possible to compile out ADMA support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 4/4] mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/4] mmc: omap_hsmmc: make it possible to compile out ADMA support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/4] DRA7x: add support for HS200 in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/4] ARM: dts: dra76x: create a common file with MMC/SD IOdelay data
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/4] ARM: dts: dra76-evm: shift to using common IOdelay data
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/4] configs: dra7xx_evm: Enable support for the HS200 mmc mode in the SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 4/4] ARM: dts: dra7x: Make pinctrl and IOdelays for MMC2 available in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 4/7] arm: dts: sunxi: update A64 to new EMAC binding
Samuel Holland
- [U-Boot] [PATCH] ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig
Zhiqiang Hou
- [U-Boot] How to test new bootloaders on Jetson TX1?
Jon Hunter
- [U-Boot] How to test new bootloaders on Jetson TX1?
Jon Hunter
- [U-Boot] How to test new bootloaders on Jetson TX1?
Jon Hunter
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Anji Jagarlmudi
- [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig
Calvin Johnson
- [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig
Calvin Johnson
- [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig
Calvin Johnson
- [U-Boot] [PATCH v1 2/4] Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig
Calvin Johnson
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Calvin Johnson
- [U-Boot] [PATCH v2 01/13] drivers: net: phy: Fix aquantia compilation with DM
Calvin Johnson
- [U-Boot] [PATCH v2 02/13] armv8: fsl-layerscape: Add support of GPIO structure
Calvin Johnson
- [U-Boot] [PATCH v2 03/13] drivers: net: pfe_eth: LS1012A PFE driver introduction
Calvin Johnson
- [U-Boot] [PATCH v2 04/13] drivers: net: pfe_eth: provide pfe commands
Calvin Johnson
- [U-Boot] [PATCH v2 05/13] drivers: net: pfe_eth: LS1012A PFE headers
Calvin Johnson
- [U-Boot] [PATCH v2 06/13] board: freescale: ls1012aqds: enable network support on ls1012aqds
Calvin Johnson
- [U-Boot] [PATCH v2 07/13] board: freescale: ls1012afrdm: enable network support on ls1012afrdm
Calvin Johnson
- [U-Boot] [PATCH v2 08/13] board: freescale: ls1012ardb: enable network support on ls1012ardb
Calvin Johnson
- [U-Boot] [PATCH v2 09/13] board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb
Calvin Johnson
- [U-Boot] [PATCH v2 10/13] armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure
Calvin Johnson
- [U-Boot] [PATCH v2 11/13] armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECC
Calvin Johnson
- [U-Boot] [PATCH v2 12/13] armv8: layerscape: csu: enable ns access to PFE registers
Calvin Johnson
- [U-Boot] [PATCH v2 13/13] configs: ls1012a: add pfe configuration for LS1012A
Calvin Johnson
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Calvin Johnson
- [U-Boot] [PATCH] usb: dwc2: Reduce data buffer size to 16kB
Calvin Johnson
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Calvin Johnson
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Calvin Johnson
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
Calvin Johnson
- [U-Boot] [PATCH] board: freescale: ls1012a: fix RGMII TX-delay issue
Calvin Johnson
- [U-Boot] I210 serdes fails to auto negotiate
John Kading
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Mark Kettenis
- [U-Boot] [PATCH 1/1][for V2018.03] efi_loader: do not use 2.0.5 as UEFI revision number
Mark Kettenis
- [U-Boot] [PATCH] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Alex Kiernan
- [U-Boot] [PATCH] Fix misaligned buffer in env_fat_save
Alex Kiernan
- [U-Boot] [PATCH] Fix --noheader on fw_printenv
Alex Kiernan
- [U-Boot] [PATCH] Fix --noheader on fw_printenv
Alex Kiernan
- [U-Boot] [PATCH] Fix --noheader on fw_printenv
Alex Kiernan
- [U-Boot] [PATCH] mmc: Fix uninitialised priv member
Alex Kiernan
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Alex Kiernan
- [U-Boot] [PATCH 2/8] Prepare for multiple bootcount drivers
Alex Kiernan
- [U-Boot] [PATCH 3/8] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 5/8] Convert CONFIG_BOOTCOUNT_RAM to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 6/8] Convert CONFIG_BOOTCOUNT_I2C to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 7/8] Integrate AT91 bootcount driver
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 0/8] Convert bootcount drivers to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2] Fix --noheader on fw_printenv
Alex Kiernan
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Alex Kiernan
- [U-Boot] [PATCH] script: Make the get_default_envs.sh script working with newest u-boot
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 00/13] Convert bootcount drivers to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 01/13] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Alex Kiernan
- [U-Boot] [PATCH v2 02/13] Prepare for multiple bootcount drivers
Alex Kiernan
- [U-Boot] [PATCH v2 03/13] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 04/13] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 05/13] Convert CONFIG_BOOTCOUNT_RAM to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 06/13] Convert CONFIG_BOOTCOUNT_I2C to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 07/13] Convert CONFIG_BOOTCOUNT_EXT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 08/13] Integrate AT91 bootcount driver
Alex Kiernan
- [U-Boot] [PATCH v2 09/13] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 10/13] Remove SYS_BOOTCOUNT_ADDR from Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 11/13] Rename CONFIG_SYS_BOOTCOUNT_ADDR to BOOTCOUNT_ADDR
Alex Kiernan
- [U-Boot] [PATCH v2 12/13] Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 13/13] Remove CONFIG_SYS_BOOTCOUNT_SINGLEWORD
Alex Kiernan
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 12/13] Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v2 11/13] Rename CONFIG_SYS_BOOTCOUNT_ADDR to BOOTCOUNT_ADDR
Alex Kiernan
- [U-Boot] [PATCH v3 00/11] Convert bootcount drivers to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 01/11] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Alex Kiernan
- [U-Boot] [PATCH v3 02/11] Prepare for multiple bootcount drivers
Alex Kiernan
- [U-Boot] [PATCH v3 03/11] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 04/11] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 05/11] Convert CONFIG_BOOTCOUNT_RAM to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 06/11] Convert CONFIG_BOOTCOUNT_I2C to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 07/11] Convert CONFIG_BOOTCOUNT_EXT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 08/11] Integrate AT91 bootcount driver
Alex Kiernan
- [U-Boot] [PATCH v3 09/11] Migrate generic bootcount to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 10/11] Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig
Alex Kiernan
- [U-Boot] [PATCH v3 11/11] Remove CONFIG_SYS_BOOTCOUNT_SINGLEWORD
Alex Kiernan
- [U-Boot] [ANN] U-Boot v2018.03-rc3 released
Alex Kiernan
- [U-Boot] [ANN] U-Boot v2018.03-rc3 released
Alex Kiernan
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Alex Kiernan
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Alex Kiernan
- [U-Boot] arm: mvebu: ClearFog: booting u-boot from ssd?
Florian Klink
- [U-Boot] arm: mvebu: ClearFog: booting u-boot from ssd?
Florian Klink
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Alexander Kochetkov
- [U-Boot] [PATCH] mmc: fix eMMC v5.1 incorrect version detection
Alexander Kochetkov
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Alexander Kochetkov
- [U-Boot] [PATCH] mmc: fix eMMC v5.1 incorrect version detection
Alexander Kochetkov
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Alexander Kochetkov
- [U-Boot] [PATCH] mmc: fix off-by-one bug in mmc_startup_v4()
Alexander Kochetkov
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Alexander Kochetkov
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Alexander Kochetkov
- [U-Boot] [PATCH] rockchip: clk: rk3188: update dpll settings to make EMAC work
Alexander Kochetkov
- [U-Boot] [PATCH] rockchip: rk3188: add rk_board_late_init() hook
Alexander Kochetkov
- [U-Boot] [PATCH 0/2] Move the iomux definitions into pinctrl-driver
Alexander Kochetkov
- [U-Boot] [PATCH 1/2] rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driver
Alexander Kochetkov
- [U-Boot] [PATCH 2/2] rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driver
Alexander Kochetkov
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Alexander Kochetkov
- [U-Boot] [PATCH v2] rockchip: i2c: enable new I2C controller for rk3066 and rk3188
Alexander Kochetkov
- [U-Boot] [PATCH v2] rockchip: i2c: enable new I2C controller for rk3066 and rk3188
Alexander Kochetkov
- [U-Boot] [PATCH 1/2] ARM: dts: imx6ul: add wdog3
Jörg Krause
- [U-Boot] [PATCH 2/2] ARM: dts: imx6ull: add wdog3
Jörg Krause
- [U-Boot] [PATCH v2 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry
Sergey Kubushyn
- [U-Boot] Crash observed while running U-Boot on LS1088 SD-boot
Ashish Kumar
- [U-Boot] Crash observed while running U-Boot on LS1088 SD-boot
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088qds: Remove CONFIG_ from local defines for FPGA
Ashish Kumar
- [U-Boot] [PATCH 1/2] armv8: ls1088a: Add clock related function in CONFIG_SPL_BUILD
Ashish Kumar
- [U-Boot] [PATCH 2/2] armv8: ls1088a: Add i2c_early_init() func for LS1088AQDS
Ashish Kumar
- [U-Boot] [PATCH v2] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
Ashish Kumar
- [U-Boot] [UBOOT PATCH 0/4] fpga: Moved fpga u-boot headers to the Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/4] fpga: Added Kconfig support for FPGA_SPARTAN3
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/4] fpga: Added CONFIG_FPGA_SPARTAN3 in the the respective defconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 3/4] arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL
Vipul Kumar
- [U-Boot] [UBOOT PATCH 4/4] arm: zynq: fpga: Added CONFIG_FPGA_ZYNQPL in the respective defconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 0/6] i2c: Moved i2c u-boot headers to Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/6] i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/6] i2c: Enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 3/6] i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE
Vipul Kumar
- [U-Boot] [UBOOT PATCH 4/6] i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED
Vipul Kumar
- [U-Boot] [UBOOT PATCH 5/6] i2c: Added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET
Vipul Kumar
- [U-Boot] [UBOOT PATCH 6/6] i2c: Added kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1
Vipul Kumar
- [U-Boot] [UBOOT PATCH 0/2] spi: Moved spi u-bbot headers to Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/2] qspi: Added Kconfig support for CONFIG_SYS_ZYNQ_QSPI_WAIT
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/2] spi: Added Kconfig support for SYS_ZYNQ_SPI_WAIT and XILINX_SPI_IDLE_VAL
Vipul Kumar
- [U-Boot] [UBOOT PATCH 0/2] microblaze: Moved U-boot headers to Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/2] microblaze: Added Kconfig support for CONFIG_XILINX_GPIO
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/2] microblaze: wdt: Added Kconfig support for CONFIG_XILINX_TB_WATCHDOG
Vipul Kumar
- [U-Boot] [UBOOT PATCH 0/2] arm64: zynqmp: mmc: Moved mmc u-boot headers to the Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI0
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1
Vipul Kumar
- [U-Boot] [UBOOT PATCH 0/2] mmc: Added Kconfig support to set minimum and maximum frequency of the mmc controller
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/2] mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/2] mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
Vipul Kumar
- [U-Boot] [UBOOT PATCH 0/2] eeprom: Moved eeprom u-boot headers to the Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH 1/2] eeprom: Added Kconfig support for ZYNQ_EEPROM
Vipul Kumar
- [U-Boot] [UBOOT PATCH 2/2] eeprom: Added Kconfig support for eeprom u-boot headers
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 0/2] spi: Moved spi u-bbot headers to Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 1/2] qspi: Added Kconfig support for CONFIG_SYS_ZYNQ_QSPI_WAIT
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 2/2] spi: Added Kconfig support for SYS_ZYNQ_SPI_WAIT and XILINX_SPI_IDLE_VAL
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 0/2] microblaze: Moved U-boot headers to Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 2/2] microblaze: wdt: Added Kconfig support for CONFIG_XILINX_TB_WATCHDOG
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 1/2] microblaze: Added Kconfig support for CONFIG_XILINX_GPIO
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 0/2] arm64: zynqmp: mmc: Moved mmc u-boot headers to the Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 1/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI0
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 0/2] eeprom: Moved eeprom u-boot headers to the Kconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 1/2] eeprom: Enabled eeprom u-boot headers in defconfig
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 2/2] eeprom: Added Kconfig support for eeprom u-boot headers
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 0/2] mmc: Added Kconfig support to set minimum and maximum frequency of the mmc controller
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 1/2] mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 2/2] mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
Vipul Kumar
- [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1
Vipul Kumar
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Alexander Kurtz
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Alexander Kurtz
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Prabhakar Kushwaha
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/5] imx: hab: Keep CAAM clock enabled after authenticating additional images
Breno Lima
- [U-Boot] [PATCH 2/5] imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB authenticate function.
Breno Lima
- [U-Boot] [PATCH 3/5] imx: hab: Check if CSF is valid before authenticating image
Breno Lima
- [U-Boot] [PATCH 4/5] imx: hab: Check if CSF contains deprecated commands
Breno Lima
- [U-Boot] [PATCH 5/5] arm: imx: hab: Define HAB_RVT_BASE according to the processor version
Breno Lima
- [U-Boot] [PATCH 1/2] doc: mxc_hab: Move HAB related info to the appropriate doc
Breno Lima
- [U-Boot] [PATCH 2/2] doc: mxc_hab: Update i.MX HAB documentation
Breno Lima
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Breno Matheus Lima
- [U-Boot] [PATCH v3] imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Breno Matheus Lima
- [U-Boot] Fwd: [PATCH v2 2/2][for v2018.03] efi_loader: provide new doc/README.efi
Leif Lindholm
- [U-Boot] Fwd: [PATCH v2 2/2][for v2018.03] efi_loader: provide new doc/README.efi
Leif Lindholm
- [U-Boot] [PATCH] ARM: dts: Add support for stm32f746-evaluation board support
Vikas MANOCHA
- [U-Boot] [PATCH] ARM: dts: Add support for stm32f746-evaluation board support
Vikas MANOCHA
- [U-Boot] [PATCH] dm: serial: Initialize serial console only when it wasn't already configured
Lukasz Majewski
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Lukasz Majewski
- [U-Boot] [PATCH] usb: dwc2: make casts of ep->dma_buf consistent
Lukasz Majewski
- [U-Boot] [PATCH] doc: watchdog: Remove Blackfin related documentation entry
Lukasz Majewski
- [U-Boot] [PATCH] Convert CONFIG LIB_HW_RAND to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v1 0/4] Convert Watchdog related defines to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v1 1/4] Convert CONFIG_IMX_WATCHDOG to Kconfig and remove HW_WATCHDOG
Lukasz Majewski
- [U-Boot] [PATCH v1 2/4] Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v1 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Lukasz Majewski
- [U-Boot] [PATCH v1 4/4] Convert CONFIG_HW_WATCHDOG to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 0/4] Convert Watchdog related defines to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 1/4] Convert CONFIG_IMX_WATCHDOG to Kconfig and remove HW_WATCHDOG
Lukasz Majewski
- [U-Boot] [PATCH v2 2/4] Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Lukasz Majewski
- [U-Boot] [PATCH v2 4/4] Convert CONFIG_HW_WATCHDOG to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v1 0/5] Provide SPL support for bootcount (in the case of using falcon boot mode)
Lukasz Majewski
- [U-Boot] [PATCH v1 1/5] bootcount: config: Make the SYS_BOOTCOUNT_ADDR available also for non EXT setups
Lukasz Majewski
- [U-Boot] [PATCH v1 2/5] bootcount: Add function wrappers to handle bootcount increment and error checking
Lukasz Majewski
- [U-Boot] [PATCH v1 3/5] spl: bootcount: Enable bootcount support in SPL
Lukasz Majewski
- [U-Boot] [PATCH v1 4/5] config: display5: Enable boot count feature in the display5 board
Lukasz Majewski
- [U-Boot] [PATCH v1 5/5] arm: display5: Extend SPL to support bootcount checking
Lukasz Majewski
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 5/8] Convert CONFIG_BOOTCOUNT_RAM to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 6/8] Convert CONFIG_BOOTCOUNT_I2C to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 7/8] Integrate AT91 bootcount driver
Lukasz Majewski
- [U-Boot] [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Lukasz Majewski
- [U-Boot] [PATCH 2/8] Prepare for multiple bootcount drivers
Lukasz Majewski
- [U-Boot] [PATCH 3/8] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Lukasz Majewski
- [U-Boot] [PATCH 2/2] arm: socfpga: use imply instead of select where applicable
Lukasz Majewski
- [U-Boot] [PATCH 0/2] arm: socfpga: Kconfig cleanups
Lukasz Majewski
- [U-Boot] [ANN] U-Boot v2018.03-rc2 released
Lukasz Majewski
- [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 1/1] fs: fat: avoid useless conversion when calling getcluster
Lukasz Majewski
- [U-Boot] [PATCH 1/1] fs: fat: avoid superfluous conversion calling set_cluster
Lukasz Majewski
- [U-Boot] [PATCH] script: Make the get_default_envs.sh script working with newest u-boot
Lukasz Majewski
- [U-Boot] [PATCH 1/2] dfu: Fix up the Kconfig mess
Lukasz Majewski
- [U-Boot] [PATCH] script: Make the get_default_envs.sh script working with newest u-boot
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2] script: Make the get_default_envs.sh script working with newest u-boot
Lukasz Majewski
- [U-Boot] [PATCH] script: Make the get_default_envs.sh script working with newest u-boot
Lukasz Majewski
- [U-Boot] [PATCH v3] script: Make the get_default_envs.sh script working with newest u-boot
Lukasz Majewski
- [U-Boot] [PATCH] dfu: Limit dfu_mmc to non-SPL case
Lukasz Majewski
- [U-Boot] [PATCH 8/8] Migrate generic bootcount to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 1/2] dfu: Fix up the Kconfig mess
Lukasz Majewski
- [U-Boot] [PATCH 2/2] usb: gadget: sdp: fix pointer casts for 64bit archs
Lukasz Majewski
- [U-Boot] [PATCH 1/2] usb: gadget: sdp: add missing line breaks
Lukasz Majewski
- [U-Boot] [PATCH 2/2] usb: gadget: sdp: fix pointer casts for 64bit archs
Lukasz Majewski
- [U-Boot] [PATCH 1/2] dfu: Fix up the Kconfig mess
Lukasz Majewski
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Lukasz Majewski
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Lukasz Majewski
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Lukasz Majewski
- [U-Boot] [PATCH v2 01/13] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Lukasz Majewski
- [U-Boot] [PATCH v2 10/13] Remove SYS_BOOTCOUNT_ADDR from Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 11/13] Rename CONFIG_SYS_BOOTCOUNT_ADDR to BOOTCOUNT_ADDR
Lukasz Majewski
- [U-Boot] [PATCH v2 12/13] Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (18.02.2018)
Lukasz Majewski
- [U-Boot] [PATCH V2 1/3] dfu: Fix up the Kconfig mess
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (19.02.2018)
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (20.02.2018)
Lukasz Majewski
- [U-Boot] [RFC] Make U-Boot log great again
Lukasz Majewski
- [U-Boot] [PATCH] bootcount: flush after storing the bootcounter
Lukasz Majewski
- [U-Boot] [PATCH] bootcount: flush after storing the bootcounter
Lukasz Majewski
- [U-Boot] [PATCH] bootcount: flush after storing the bootcounter
Lukasz Majewski
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Lukasz Majewski
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Lukasz Majewski
- [U-Boot] [PATCH v1 0/5] Provide SPL support for bootcount (in the case of using falcon boot mode)
Lukasz Majewski
- [U-Boot] [PATCH v1 1/5] bootcount: spl: Enable bootcount support in SPL
Lukasz Majewski
- [U-Boot] [PATCH v1 2/5] bootcount: Add function wrappers to handle bootcount increment and error checking
Lukasz Majewski
- [U-Boot] [PATCH v1 3/5] bootcount: u-boot: Do not increment bootcount if already done in SPL
Lukasz Majewski
- [U-Boot] [PATCH v1 4/5] bootcount: display5: spl: Extend SPL to support bootcount checking
Lukasz Majewski
- [U-Boot] [PATCH v1 5/5] bootcount: display5: config: Enable boot count feature in the display5 board
Lukasz Majewski
- [U-Boot] [PATCH v1 3/5] bootcount: u-boot: Do not increment bootcount if already done in SPL
Lukasz Majewski
- [U-Boot] [PATCH v1 3/5] bootcount: u-boot: Do not increment bootcount if already done in SPL
Lukasz Majewski
- [U-Boot] [PATCH v1 4/5] bootcount: display5: spl: Extend SPL to support bootcount checking
Lukasz Majewski
- [U-Boot] [PATCH v1 4/5] bootcount: display5: spl: Extend SPL to support bootcount checking
Lukasz Majewski
- [U-Boot] [PATCH v1 4/5] bootcount: display5: spl: Extend SPL to support bootcount checking
Lukasz Majewski
- [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support
Lukasz Majewski
- [U-Boot] [PATCH 1/2] omap: Fix AM335x build with enabled fastboot flash
Lukasz Majewski
- [U-Boot] [PATCH 2/2] configs: am335x_boneblack: Enable fastboot flash capability
Lukasz Majewski
- [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support
Lukasz Majewski
- [U-Boot] [PATCH v2 1/3] watchdog: Add Cadence watchdog driver
Lukasz Majewski
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Lukasz Majewski
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Lukasz Majewski
- [U-Boot] [PATCH 1/3] cmd: part: Allow passing partition name to start and size
Lukasz Majewski
- [U-Boot] [PATCH 2/3] cmd: part: Extract common code to separate function
Lukasz Majewski
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Lukasz Majewski
- [U-Boot] [PATCH v2 1/3] watchdog: Add Cadence watchdog driver
Lukasz Majewski
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Lukasz Majewski
- [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs
Vikas Manocha
- [U-Boot] [PATCH v2 1/3] mach-stm32: Add set_env_soc_name support
Vikas Manocha
- [U-Boot] [PATCH] configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIG
Vikas Manocha
- [U-Boot] [PATCH v2 1/3] mach-stm32: Add set_env_soc_name support
Vikas Manocha
- [U-Boot] [PATCH 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/
Vikas Manocha
- [U-Boot] [PATCH 3/5] arch-stm32: Factorize stm32.h for STM32F4 and F7
Vikas Manocha
- [U-Boot] [PATCH 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/
Vikas Manocha
- [U-Boot] [PATCH v2 0/5] STM32: Clean unused and factorize .h files in arch-stm32
Vikas Manocha
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Uri Mashiach
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Uri Mashiach
- [U-Boot] [PATCH v2] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Uri Mashiach
- [U-Boot] [PATCH 1/2] mx7_common: Fix SPL compilation with secure boot support enabled
Eran Matityahu
- [U-Boot] [PATCH 2/2] Makefile: Build firmware-ivt image type for HAB verification also for mx7
Eran Matityahu
- [U-Boot] [PATCH 1/3] sunxi: Add selective PHY address
Stefan Mavrodiev
- [U-Boot] [PATCH 2/3] sunxi: Add A20-SOM204-EVB board
Stefan Mavrodiev
- [U-Boot] [PATCH 3/3] sunxi: Add A20-SOM204-EVB-eMMC board
Stefan Mavrodiev
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH 1/3] Move CONFIG_PHY_ADDR to Kconfig
Stefan Mavrodiev
- [U-Boot] [PATCH 2/3] sunxi: Add A20-SOM204-EVB board
Stefan Mavrodiev
- [U-Boot] [PATCH 3/3] sunxi: Add A20-SOM204-EVB-eMMC board
Stefan Mavrodiev
- [U-Boot] [PATCH 3/3] sunxi: Add A20-SOM204-EVB-eMMC board
Stefan Mavrodiev
- [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig
Stefan Mavrodiev
- [U-Boot] [PATCH v2 2/3] sunxi: Add A20-SOM204-EVB board
Stefan Mavrodiev
- [U-Boot] [PATCH v2 3/3] sunxi: Add A20-SOM204-EVB-eMMC board
Stefan Mavrodiev
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v4 1/2] arm: sunxi: Allwinner A10 SPI driver
Stefan Mavrodiev
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] i2c: mvtwsi.c: Fix set speed
Stefan Mavrodiev
- [U-Boot] Minnowmax Turbot not supported
Bin Meng
- [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()
Bin Meng
- [U-Boot] [PATCH] efi_stub: Fix GDT_NOTSYS check
Bin Meng
- [U-Boot] [PATCH 1/3] video: ivybridge_igd: Fix compiler warning
Bin Meng
- [U-Boot] [PATCH 2/3] arm: omap2: Fix compiler warning
Bin Meng
- [U-Boot] [PATCH 3/3] microblaze: bootm: Fix compiler warning
Bin Meng
- [U-Boot] [PATCH 1/3] video: ivybridge_igd: Fix compiler warning
Bin Meng
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Bin Meng
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Alexander Merkle
- [U-Boot] [PATCH] net: e1000: Fix e1000_igb semaphore handling
Bernhard Messerklinger
- [U-Boot] [PATCH] pci: Fix decode regions for memory banks
Bernhard Messerklinger
- [U-Boot] [PATCH] ns16550: Fix mem mapped endian check
Bernhard Messerklinger
- [U-Boot] [PATCH] x86: mmc: Fix mapping of BAR memory
Bernhard Messerklinger
- [U-Boot] [PATCH] mmc: Fix uninitialised priv member
Robert Nelson
- [U-Boot] [RFC] Make U-Boot log great again
Robert Nelson
- [U-Boot] [PATCH] common: build ymodem and s_record only on need
Jun Nie
- [U-Boot] [PATCH] SPL: Add signature verification when loading image
Jun Nie
- [U-Boot] [PATCH] common: build ymodem and s_record only on need
Jun Nie
- [U-Boot] [PATCH] common: build ymodem only on need
Jun Nie
- [U-Boot] [PATCH] SPL: Add signature verification when loading image
Jun Nie
- [U-Boot] [PATCH] SPL: Add signature verification when loading image
Jun Nie
- [U-Boot] [PATCH] SPL: Add signature verification when loading image
Jun Nie
- [U-Boot] [PATCH v2] SPL: Add signature verification when loading image
Jun Nie
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Bryan O'Donoghue
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Bryan O'Donoghue
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Bryan O'Donoghue
- [U-Boot] [PATCH v4 00/12] Add new OPTEE bootm support to u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH v4 01/12] optee: Add lib entries for sharing OPTEE code across ports
Bryan O'Donoghue
- [U-Boot] [PATCH v4 02/12] optee: Add CONFIG_OPTEE_TZDRAM_SIZE
Bryan O'Donoghue
- [U-Boot] [PATCH v4 03/12] optee: Add CONFIG_OPTEE_TZDRAM_BASE
Bryan O'Donoghue
- [U-Boot] [PATCH v4 04/12] optee: Add optee_image_get_entry_point()
Bryan O'Donoghue
- [U-Boot] [PATCH v4 05/12] optee: Add optee_image_get_load_addr()
Bryan O'Donoghue
- [U-Boot] [PATCH v4 06/12] image: Update comment for IH_TYPE_TEE
Bryan O'Donoghue
- [U-Boot] [PATCH v4 07/12] tools: mkimage: add tee-bootable image type
Bryan O'Donoghue
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH v4 09/12] optee: Add optee_verify_bootm_image()
Bryan O'Donoghue
- [U-Boot] [PATCH v4 10/12] optee: Add error printout
Bryan O'Donoghue
- [U-Boot] [PATCH v4 11/12] bootm: optee: Add mechanism to validate a bootable TEE image
Bryan O'Donoghue
- [U-Boot] [PATCH v4 12/12] optee: Add CONFIG_OPTEE_LOAD_ADDR
Bryan O'Donoghue
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH] Revert "mx6: ddr: Allow changing REFSEL and REFR fields"
Maxim Yu. Osipov
- [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH] NET: designware: fix clock enable
Eugeniy Paltsev
- [U-Boot] [PATCH 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064
Eugeniy Paltsev
- [U-Boot] [PATCH 1/2] SPI Flash: add support of sst26wf* flash series
Eugeniy Paltsev
- [U-Boot] [PATCH 2/2] SF: add support for sst26wf016, sst26wf032, sst26wf064
Eugeniy Paltsev
- [U-Boot] [PATCH 00/18] ARC: cache subsystem improvement/refactoring
Eugeniy Paltsev
- [U-Boot] [PATCH 01/18] ARC: cache: move i$ entire operation to separate function
Eugeniy Paltsev
- [U-Boot] [PATCH 02/18] ARC: cache: remove per-line I$ operations as unused
Eugeniy Paltsev
- [U-Boot] [PATCH 03/18] ARC: cache: Add support of FLUSH_N_INV d$ operations
Eugeniy Paltsev
- [U-Boot] [PATCH 04/18] ARC: introduce is_isa_X functions
Eugeniy Paltsev
- [U-Boot] [PATCH 05/18] ARC: flush & invalidate D$ with a single command
Eugeniy Paltsev
- [U-Boot] [PATCH 06/18] ARC: cache: move IOC initialization to separate function
Eugeniy Paltsev
- [U-Boot] [PATCH 07/18] ARC: move BCR encodings to separate header file
Eugeniy Paltsev
- [U-Boot] [PATCH 08/18] ARC: cache: allways check dcache status before entire/line operations
Eugeniy Paltsev
- [U-Boot] [PATCH 09/18] ARC: cache: Use is_isa_arcv2() instead of CONFIG_ISA_ARCV2 ifdef
Eugeniy Paltsev
- [U-Boot] [PATCH 10/18] ARC: cache: move slc status check into slc_entire_op and slc_rgn_op
Eugeniy Paltsev
- [U-Boot] [PATCH 11/18] ARC: cache: get rid of [slc, pae, icache, dcache]_exists global variables
Eugeniy Paltsev
- [U-Boot] [PATCH 12/18] ARC: mode cache global variables to global data struct
Eugeniy Paltsev
- [U-Boot] [PATCH 13/18] ARC: move IOC enabling to compile time options
Eugeniy Paltsev
- [U-Boot] [PATCH 14/18] ARC: implement function to sync I/D caches before relocation
Eugeniy Paltsev
- [U-Boot] [PATCH 15/18] ARC: implement function to cleanup caches before linux
Eugeniy Paltsev
- [U-Boot] [PATCH 16/18] ARC: cache: move pae exists check into slc_upper_region_init
Eugeniy Paltsev
- [U-Boot] [PATCH 17/18] ARC: cache: don't invalidate SLC in invalidate_icache_all
Eugeniy Paltsev
- [U-Boot] [PATCH 18/18] ARC: cache: add missing cache cleanup before cache disable
Eugeniy Paltsev
- [U-Boot] [uboot-snps-arc] [PATCH 1/2] SPI Flash: add support of sst26wf* flash series
Eugeniy Paltsev
- [U-Boot] How to test new bootloaders on Jetson TX1?
Mikko Perttunen
- [U-Boot] How to test new bootloaders on Jetson TX1?
Mikko Perttunen
- [U-Boot] [PATCH V2 2/2] Remove config_distro_defaults.h
Eddy Petrișor
- [U-Boot] [PATCH v2] LS2088ARDB: Secure Boot: Fix fall back option failure
Vinitha V Pillai
- [U-Boot] Where is the edge between a loader and (microkernel) OS?
Dmitry Ponyatov
- [U-Boot] [PATCH] am335x_evm: Consolidate eMMC partitions with DFU info
Sam Protsenko
- [U-Boot] [PATCH v1 2/2] mmc: fix bug in mmc_startup_v4()
Sam Protsenko
- [U-Boot] [PATCH] am335x_evm: Consolidate eMMC partitions with DFU info
Sam Protsenko
- [U-Boot] [PATCH v1 2/2] mmc: fix bug in mmc_startup_v4()
Sam Protsenko
- [U-Boot] [PATCH] mmc: Fix uninitialised priv member
Sam Protsenko
- [U-Boot] [RFC] Make U-Boot log great again
Sam Protsenko
- [U-Boot] [RFC] Make U-Boot log great again
Sam Protsenko
- [U-Boot] [PATCH 0/3] Provide partition names to commands in environment
Sam Protsenko
- [U-Boot] [PATCH 1/3] cmd: part: Allow passing partition name to start and size
Sam Protsenko
- [U-Boot] [PATCH 2/3] cmd: part: Extract common code to separate function
Sam Protsenko
- [U-Boot] [PATCH 3/3] env: ti: boot: Get rid of magic numbers
Sam Protsenko
- [U-Boot] [PATCH] board: am335x: Set serial# variable
Sam Protsenko
- [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support
Sam Protsenko
- [U-Boot] [PATCH 1/2] omap: Fix AM335x build with enabled fastboot flash
Sam Protsenko
- [U-Boot] [PATCH 2/2] configs: am335x_boneblack: Enable fastboot flash capability
Sam Protsenko
- [U-Boot] [PATCH] board: am335x: Set serial# variable
Sam Protsenko
- [U-Boot] [PATCH v2 1/1] board: am335x: Set serial# variable
Sam Protsenko
- [U-Boot] [PATCH] board: am335x: Set serial# variable
Sam Protsenko
- [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support
Sam Protsenko
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Andre Przywara
- [U-Boot] [PATCH 1/1] efi_loader: fix building crt0 on arm
Andre Przywara
- [U-Boot] [PATCH v2 0/7] sunxi: sun8i-emac: Update DT bindings
Andre Przywara
- [U-Boot] [PATCH v2 1/7] sunxi: gpio: add missing compatible strings
Andre Przywara
- [U-Boot] [PATCH v2 2/7] net: sun8i-emac: support new pinctrl DT bindings
Andre Przywara
- [U-Boot] [PATCH v2 3/7] net: sun8i-emac: add support for new EMAC DT binding
Andre Przywara
- [U-Boot] [PATCH v2 4/7] arm: dts: sunxi: update A64 to new EMAC binding
Andre Przywara
- [U-Boot] [PATCH v2 5/7] arm: dts: sunxi: update H3 to new EMAC binding
Andre Przywara
- [U-Boot] [PATCH v2 6/7] arm: dts: sunxi: update H5 to new EMAC binding
Andre Przywara
- [U-Boot] [PATCH v2 7/7] net: sun8i-emac: remove support for old binding
Andre Przywara
- [U-Boot] [PATCH v2 1/7] sunxi: gpio: add missing compatible strings
Andre Przywara
- [U-Boot] Allwinner H5 builds broken in master
Andre Przywara
- [U-Boot] [RFC PATCH] net: mii command: disable build for 64-bit Allwinner boards
Andre Przywara
- [U-Boot] [PATCH] sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs
Andre Przywara
- [U-Boot] [PATCH for 2018.03] sunxi: README.sunxi64: Add hint about non-debug ATF
Andre Przywara
- [U-Boot] [PATCH for 2018.03] sunxi: README.sunxi64: Add hint about non-debug ATF
Andre Przywara
- [U-Boot] [PATCH] SPL: Add signature verification when loading image
Andre Przywara
- [U-Boot] [PATCH] SPL: Add signature verification when loading image
Andre Przywara
- [U-Boot] [PATCH 1/5] sunxi: map DRAM part with 3G size
André Przywara
- [U-Boot] [PATCH 2/5] sunxi: add Kconfig option for the maximum accessible DRAM
André Przywara
- [U-Boot] [PATCH 3/5] sunxi: add 3GiB DRAM detection support in main U-Boot
André Przywara
- [U-Boot] [PATCH 4/5] sunxi: let sunxi_dram_init return unsigned long long
André Przywara
- [U-Boot] [PATCH v2 4/7] arm: dts: sunxi: update A64 to new EMAC binding
André Przywara
- [U-Boot] [PATCH] common: build ymodem and s_record only on need
André Przywara
- [U-Boot] [RFC PATCH] net: mii command: disable build for 64-bit Allwinner boards
André Przywara
- [U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues
André Przywara
- [U-Boot] Port help for qca board
Clément Péron
- [U-Boot] Can't boot with initramfs but It's ok without
Clément Péron
- [U-Boot] Can't boot with initramfs but It's ok without
Clément Péron
- [U-Boot] [PATCH] PowerPC: phy: enable all phylib drivers when use phylib and tsec enet
Zhao Qiang
- [U-Boot] [RFC 01/14] dma: add dma channels support and improve uclass
Vignesh R
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c, db820c: update email.
Jorge Ramirez-Ortiz
- [U-Boot] EXT: Re: [PATCH 2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
Ray, Ian (GE Healthcare)
- [U-Boot] EXT: [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Ray, Ian (GE Healthcare)
- [U-Boot] EXT: [PATCH v1 1/5] bootcount: config: Make the SYS_BOOTCOUNT_ADDR available also for non EXT setups
Ray, Ian (GE Healthcare)
- [U-Boot] [PATCH v2 00/20] Bring NAND support to Nintendo NES Classic
Miquel Raynal
- [U-Boot] [PATCH v2 01/20] spl: fix binman_sym output check
Miquel Raynal
- [U-Boot] [PATCH v2 02/20] mtd: nand: sunxi: fix ECC strength choice
Miquel Raynal
- [U-Boot] [PATCH v2 03/20] spl: nand: sunxi: fix second case of modulo by zero error
Miquel Raynal
- [U-Boot] [PATCH v2 04/20] spl: nand: sunxi: fix typo on register name
Miquel Raynal
- [U-Boot] [PATCH v2 05/20] spl: nand: sunxi: introduce the nand_wait_int() helper
Miquel Raynal
- [U-Boot] [PATCH v2 06/20] spl: nand: sunxi: introduce the nand_wait_cmd_fifo_empty() helper
Miquel Raynal
- [U-Boot] [PATCH v2 07/20] spl: nand: sunxi: add missing status clear
Miquel Raynal
- [U-Boot] [PATCH v2 08/20] spl: nand: sunxi: create an helper to handle command execution
Miquel Raynal
- [U-Boot] [PATCH v2 09/20] spl: nand: sunxi: ensure enough time has passed after changing the column
Miquel Raynal
- [U-Boot] [PATCH v2 10/20] spl: nand: sunxi: make the reset column helper more generic
Miquel Raynal
- [U-Boot] [PATCH v2 11/20] sunxi: spl: deassert the NAND controller reset line
Miquel Raynal
- [U-Boot] [PATCH v2 12/20] spl: nand: sunxi: declare the ecc_bytes array globally
Miquel Raynal
- [U-Boot] [PATCH v2 13/20] spl: nand: sunxi: use PIO instead of DMA
Miquel Raynal
- [U-Boot] [PATCH v2 14/20] sunxi: spl: remove DMA related settings of the NAND controller
Miquel Raynal
- [U-Boot] [PATCH v2 15/20] sunxi: allow NAND support in SPL to be compiled for sun8i platforms
Miquel Raynal
- [U-Boot] [PATCH v2 16/20] sunxi: dts: enable NAND on NES classic
Miquel Raynal
- [U-Boot] [PATCH v2 17/20] sunxi: automatically select SPL_NAND_SUPPORT in Kconfig
Miquel Raynal
- [U-Boot] [PATCH v2 18/20] sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig
Miquel Raynal
- [U-Boot] [PATCH v2 19/20] sunxi: move the NAND parameters to Kconfig
Miquel Raynal
- [U-Boot] [PATCH v2 20/20] configs: add NAND support for NES Classic
Miquel Raynal
- [U-Boot] [PATCH v2 11/20] sunxi: spl: deassert the NAND controller reset line
Miquel Raynal
- [U-Boot] [PATCH v3 00/20] Bring NAND support to Nintendo NES Classic
Miquel Raynal
- [U-Boot] [PATCH v3 01/20] spl: fix binman_sym output check
Miquel Raynal
- [U-Boot] [PATCH v3 02/20] mtd: nand: sunxi: fix ECC strength choice
Miquel Raynal
- [U-Boot] [PATCH v3 03/20] spl: nand: sunxi: fix second case of modulo by zero error
Miquel Raynal
- [U-Boot] [PATCH v3 04/20] spl: nand: sunxi: fix typo on register name
Miquel Raynal
- [U-Boot] [PATCH v3 05/20] spl: nand: sunxi: introduce the nand_wait_int() helper
Miquel Raynal
- [U-Boot] [PATCH v3 06/20] spl: nand: sunxi: introduce the nand_wait_cmd_fifo_empty() helper
Miquel Raynal
- [U-Boot] [PATCH v3 07/20] spl: nand: sunxi: add missing status clear
Miquel Raynal
- [U-Boot] [PATCH v3 08/20] spl: nand: sunxi: create an helper to handle command execution
Miquel Raynal
- [U-Boot] [PATCH v3 09/20] spl: nand: sunxi: ensure enough time has passed after changing the column
Miquel Raynal
- [U-Boot] [PATCH v3 10/20] spl: nand: sunxi: make the reset column helper more generic
Miquel Raynal
- [U-Boot] [PATCH v3 11/20] sunxi: spl: deassert the NAND controller reset line
Miquel Raynal
- [U-Boot] [PATCH v3 12/20] spl: nand: sunxi: declare the ecc_bytes array globally
Miquel Raynal
- [U-Boot] [PATCH v3 13/20] spl: nand: sunxi: use PIO instead of DMA
Miquel Raynal
- [U-Boot] [PATCH v3 14/20] sunxi: spl: remove DMA related settings of the NAND controller
Miquel Raynal
- [U-Boot] [PATCH v3 15/20] sunxi: allow NAND support to be compiled for sun8i platforms
Miquel Raynal
- [U-Boot] [PATCH v3 16/20] sunxi: dts: enable NAND on NES classic
Miquel Raynal
- [U-Boot] [PATCH v3 17/20] sunxi: automatically select SPL_NAND_SUPPORT in Kconfig
Miquel Raynal
- [U-Boot] [PATCH v3 18/20] sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig
Miquel Raynal
- [U-Boot] [PATCH v3 19/20] sunxi: move the NAND parameters to Kconfig
Miquel Raynal
- [U-Boot] [PATCH v3 20/20] configs: add NAND support for NES Classic
Miquel Raynal
- [U-Boot] [PATCH v2] fdt: Fixup only valid memory banks
Thierry Reding
- [U-Boot] [PATCHv1] board: ge: ppd: Fix environment variable location
Sebastian Reichel
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
Sebastian Reichel
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] cmd: nvedit: env_get_f must check for env_get_char error codes
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] env: make env_import(_redund) return 0 on success, not 1
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] env: move more common code to env_import_redund
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] env: make env drivers propagate env_import return value
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] env: sf: use env_import_redund to simplify env_sf_load
Tom Rini
- [U-Boot] [PATCH] Remove more checks for CONFIG_SYS_TEXT_BASE being set
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: Update email address for Maxime Ripard
Tom Rini
- [U-Boot] [U-Boot, 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries
Tom Rini
- [U-Boot] [U-Boot, 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 4/4] usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command
Tom Rini
- [U-Boot] [U-Boot, 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
Tom Rini
- [U-Boot] Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget entries
Tom Rini
- [U-Boot] [PATCH] configs: Migrate CONFIG_SYS_TEXT_BASE
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 2)
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [PATCH] usb: dwc2: make casts of ep->dma_buf consistent
Tom Rini
- [U-Boot] [PATCH v2] configs: am335x_evm: Disable ISO and EFI partitions in SPL
Tom Rini
- [U-Boot] [PATCH 1/2] ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warning
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefine
Tom Rini
- [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig
Tom Rini
- [U-Boot] [PATCH v2] MAINTAINERS: Update email address for Maxime Ripard
Tom Rini
- [U-Boot] [PATCH] usb: dwc2: make casts of ep->dma_buf consistent
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] README: add doc for how to supply user specific compiler flags to Kbuild
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] buildman: add option -E for treating compiler warnings as errors
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] travis.yml: fix 'set +e' in build script
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] travis.yml: run buildman with option -E
Tom Rini
- [U-Boot] MAINTAINERS: board: qcom: db410c, db820c: update email.
Tom Rini
- [U-Boot] [PATCH 2/2] Remove config_distro_defaults.h
Tom Rini
- [U-Boot] [U-Boot, 1/2] fpga: Resync various CONFIG_FPGA_* symbols
Tom Rini
- [U-Boot] [U-Boot, 2/2] cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA
Tom Rini
- [U-Boot] Fix FreeBSD endian checks
Tom Rini
- [U-Boot] am335x, shc: kconfig: Fix misspelled choice default
Tom Rini
- [U-Boot] usb: ulpi: kconfig: Remove meaningless choice default
Tom Rini
- [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation
Tom Rini
- [U-Boot] [PATCH 0/2] Android and arm64 improvement
Tom Rini
- [U-Boot] [PATCH] Kconfig: Use imply for network commands in distro default
Tom Rini
- [U-Boot] [PATCH] spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guard
Tom Rini
- [U-Boot] [PATCH 1/2] configs: Drop unused CONFIG_SPL_MMC_MINIMAL
Tom Rini
- [U-Boot] [PATCH 2/2] configs: Migrate CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] CONFIG_CMD_KGDB unused?
Tom Rini
- [U-Boot] CONFIG_RANDOM_UUID and CONFIG_CMD_UUID unused?
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Pull request: u-boot-ubi/master
Tom Rini
- [U-Boot] [U-Boot,1/2] parse the second area of android image
Tom Rini
- [U-Boot] [U-Boot,2/2] move booti_setup to arch/arm/lig/image.c
Tom Rini
- [U-Boot] part: Allocate only one legacy_mbr buffer
Tom Rini
- [U-Boot] [U-Boot, 1/1] atcspi200: avoid possible NULL dereference
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: k2g: Add pinmux data for QSPI on K2G ICE
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: dts: keystone-k2g-ice: Add support for QSPI
Tom Rini
- [U-Boot] [U-Boot, v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warning
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefine
Tom Rini
- [U-Boot] doc: watchdog: Remove Blackfin related documentation entry
Tom Rini
- [U-Boot] [PATCH] am335x_evm: Consolidate eMMC partitions with DFU info
Tom Rini
- [U-Boot] configs: imx6q_logic: Move CONFIG_PHY_SMSC to defconfig
Tom Rini
- [U-Boot] Convert CONFIG_MXC_GPIO to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] arm: imx: mx23: Move MX23 selection to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] arm: imx: mx28: Move MX28 selection to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] spl: use ARCH_MX23/28 to specify SPL_LDSCRIPT
Tom Rini
- [U-Boot] [U-Boot,v2,4/4] Convert CONFIG_NAND_MXS to Kconfig
Tom Rini
- [U-Boot] configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIG
Tom Rini
- [U-Boot] Kconfig: net: phylib: Phylib should depends on NET
Tom Rini
- [U-Boot] [U-Boot, v2] Kconfig: Select networking commands only when NET is enabled
Tom Rini
- [U-Boot] [U-Boot,V3] Convert CONFIG_APBH_DMA et al to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG LIB_HW_RAND to Kconfig
Tom Rini
- [U-Boot] configs: imx6q_logic: Move CONFIG_MXC_UART to Kconfig
Tom Rini
- [U-Boot] omap4: sdp4430: Enable CONFIG_NET for this platform
Tom Rini
- [U-Boot] [PATCH] block: Migrate SystemACE chip to Kconfig
Tom Rini
- [U-Boot] [PATCH] video: ivybridge: FIx defined but not used warning
Tom Rini
- [U-Boot] [PATCH] block: Migrate SystemACE chip to Kconfig
Tom Rini
- [U-Boot] Convert LIB_UUID to Kconfig
Tom Rini
- [U-Boot] Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig
Tom Rini
- [U-Boot] [PATCH] buildman: support newer gcc versions from kernel.org
Tom Rini
- [U-Boot] [PATCH] buildman: support newer gcc versions from kernel.org
Tom Rini
- [U-Boot] [PATCH] configs: Re-sync with CONFIG_DISTRO_DEFAULTS
Tom Rini
- [U-Boot] [PATCH] configs: Re-sync with CONFIG_DISTRO_DEFAULTS
Tom Rini
- [U-Boot] [PULL] efi v2018.03 patch queue 2018-02-10
Tom Rini
- [U-Boot] configs: Migrate CONFIG_SYS_TEXT_BASE
Tom Rini
- [U-Boot] Remove more checks for CONFIG_SYS_TEXT_BASE being set
Tom Rini
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Tom Rini
- [U-Boot] [PATCH v2 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Tom Rini
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Tom Rini
- [U-Boot] [PATCH 1/3] video: ivybridge_igd: Fix compiler warning
Tom Rini
- [U-Boot] [PATCH 2/3] arm: omap2: Fix compiler warning
Tom Rini
- [U-Boot] [PATCH 3/3] microblaze: bootm: Fix compiler warning
Tom Rini
- [U-Boot] [PATCH] SystemACE: Remove
Tom Rini
- [U-Boot] [RFC PATCH] net: mii command: disable build for 64-bit Allwinner boards
Tom Rini
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Tom Rini
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Tom Rini
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Tom Rini
- [U-Boot] SPARC support
Tom Rini
- [U-Boot] SPARC support
Tom Rini
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] Fix misaligned buffer in env_fat_save
Tom Rini
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Tom Rini
- [U-Boot] [ANN] U-Boot v2018.03-rc2 released
Tom Rini
- [U-Boot] [PATCH] configs: Migrate CONFIG_SYS_TEXT_BASE
Tom Rini
- [U-Boot] [PULL] Please pull from u-boot-rockchip/master
Tom Rini
- [U-Boot] [U-Boot,1/3] cmd: fitupd: Convert CONFIG_CMD_FITUPD
Tom Rini
- [U-Boot] [U-Boot, 2/3] cmd: fitupd: Convert CONFIG_UPDATE_TFTP and co.
Tom Rini
- [U-Boot] [U-Boot, 3/3] tftp: update: Include missing cfi_flash.h header
Tom Rini
- [U-Boot] [U-Boot, 1/3] video: ivybridge_igd: Fix compiler warning
Tom Rini
- [U-Boot] [U-Boot,2/3] arm: omap2: Fix compiler warning
Tom Rini
- [U-Boot] [U-Boot,3/3] microblaze: bootm: Fix compiler warning
Tom Rini
- [U-Boot] [PATCH] dfu: Limit dfu_mmc to non-SPL case
Tom Rini
- [U-Boot] [PATCH] dfu: Limit dfu_mmc to non-SPL case
Tom Rini
- [U-Boot] [U-Boot,1/8] spi: Migrate CONFIG_SH_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot,2/8] spi: Migrate CONFIG_SH_QSPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot,3/8] spi: Migrate CONFIG_MXS_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot,4/8] spi: Migrate CONFIG_MXC_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 5/8] spi: Migrate CONFIG_MPC8XXX_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 6/8] spi: Migrate CONFIG_LPC32XX_SSP to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 7/8] spi: Migrate CONFIG_KIRKWOOD_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot,8/8] spi: Migrate CONFIG_CF_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] .travis.yml: download xtensa prebuilt toolchain
Tom Rini
- [U-Boot] [U-Boot,v2,2/3] xtfpga: enable hush parser
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] .travis.yml: test xtensa xtfpga board in QEMU
Tom Rini
- [U-Boot] [U-Boot,1/1] dm: core: fix typo in comment (device.h)
Tom Rini
- [U-Boot] [U-Boot, 1/1, for, v2018.03] efi_driver: comment struct efi_driver_ops
Tom Rini
- [U-Boot] SystemACE: Remove
Tom Rini
- [U-Boot] ARM: image: indent with tab instead of 4 spaces
Tom Rini
- [U-Boot] cmd: booti: fix invalid image address in debug message
Tom Rini
- [U-Boot] arm: update Kconfig help for ENABLE_ARM_SOC_BOOT0_HOOK
Tom Rini
- [U-Boot] [U-Boot, 2/2] fix spelling of 'functions' in 2 places (was 'funtcions')
Tom Rini
- [U-Boot] [U-Boot, RFC] Kconfig: cmd: Make networking command dependent on NET
Tom Rini
- [U-Boot] [U-Boot, v2] configs: am335x_evm: Disable ISO and EFI partitions in SPL
Tom Rini
- [U-Boot] [U-Boot, 1/2] lib: Kconfig: Move DYNAMIC_CRC_TABLE to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 2/2] configs: am335x_evm: Add DYNAMIC_CRC_TABLE
Tom Rini
- [U-Boot] [U-Boot, 1/2] configs: Drop unused CONFIG_SPL_MMC_MINIMAL
Tom Rini
- [U-Boot] [U-Boot,2/2] configs: Migrate CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] am335x_evm: Consolidate eMMC partitions with DFU info
Tom Rini
- [U-Boot] arm/PSCI: support PSCI versions greater than 1.0
Tom Rini
- [U-Boot] [U-Boot,v2] Fix --noheader on fw_printenv
Tom Rini
- [U-Boot] [U-Boot, v3] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Tom Rini
- [U-Boot] [U-Boot, 1/1] cmd: scsi: move CMD_SCSI to device access commands
Tom Rini
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Tom Rini
- [U-Boot] [PATCH] RPi: Add myself as board maintainer
Tom Rini
- [U-Boot] [U-Boot, 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
Tom Rini
- [U-Boot] [PATCH] RPi: Add myself as board maintainer
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] [PATCH] dfu: Build only RAM for DFU in SPL
Tom Rini
- [U-Boot] [PATCH] configs: am335x_evm_usbspl: Add CONFIG_SPL_NET_VCI_STRING
Tom Rini
- [U-Boot] [U-Boot,1/2] env: Fix env_load_location
Tom Rini
- [U-Boot] env: restore old env_get_char() behaviour
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PATCH 1/5] sh: Use -m2a-nofpu only
Tom Rini
- [U-Boot] [PATCH 2/5] travis-ci: Enable more SH to be tested
Tom Rini
- [U-Boot] [PATCH 3/5] net: sh_eth: Fix unused variable warnings
Tom Rini
- [U-Boot] [PATCH 4/5] sh: Do not provide strncmp
Tom Rini
- [U-Boot] [PATCH 5/5] sh7763rdp: Add correct MTDIDS/MTDPARTS
Tom Rini
- [U-Boot] [PATCH 2/5] travis-ci: Enable more SH to be tested
Tom Rini
- [U-Boot] [PATCH] vexpress: Sign up as maintainer
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Tom Rini
- [U-Boot] [GIT] Pull request: u-boot-dfu (19.02.2018)
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PATCH v2] vexpress: Sign up as maintainer
Tom Rini
- [U-Boot] Pull request: u-boot-ubi/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [ANN] v2018.03-rc3 delayed a day
Tom Rini
- [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Tom Rini
- [U-Boot] [U-Boot, v3] script: Make the get_default_envs.sh script working with newest u-boot
Tom Rini
- [U-Boot] [ANN] U-Boot v2018.03-rc3 released
Tom Rini
- [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
Tom Rini
- [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
Tom Rini
- [U-Boot] [RFC] Make U-Boot log great again
Tom Rini
- [U-Boot] [RFC] Make U-Boot log great again
Tom Rini
- [U-Boot] [RFC] Make U-Boot log great again
Tom Rini
- [U-Boot] [RFC] Make U-Boot log great again
Tom Rini
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Tom Rini
- [U-Boot] [PATCH v1 3/4] mmc: omap_hsmmc: compile out ADMA support for am33xx and omap34xx
Tom Rini
- [U-Boot] [PATCH v1 2/4] mmc: omap_hsmmc: compile out write support if not needed
Tom Rini
- [U-Boot] [PATCH v1 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Tom Rini
- [U-Boot] [PATCH v1 4/4] mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
Tom Rini
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Tom Rini
- [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs
Tom Rini
- [U-Boot] [PATCH v2 3/4] mmc: omap_hsmmc: make it possible to compile out ADMA support
Tom Rini
- [U-Boot] [PATCH v2 4/4] mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
Tom Rini
- [U-Boot] [PATCH v2 1/4] mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
Tom Rini
- [U-Boot] [PATCH v2 2/4] mmc: omap_hsmmc: compile out write support if not needed
Tom Rini
- [U-Boot] [PATCH v2 3/4] mmc: omap_hsmmc: make it possible to compile out ADMA support
Tom Rini
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] fs: fat: avoid superfluous conversion calling set_cluster
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] fs: fat: avoid useless conversion when calling get_cluster
Tom Rini
- [U-Boot] config_whitelist: remove false-positive CONFIG options
Tom Rini
- [U-Boot] configs: Re-sync with CONFIG_DISTRO_DEFAULTS
Tom Rini
- [U-Boot] [U-Boot,2/2] xtensa: clean up CONFIG_SYS_TEXT_ADDR
Tom Rini
- [U-Boot] [U-Boot, 1/3] ARM: Kconfig: Move TI_SECURE_DEVICE to a common area
Tom Rini
- [U-Boot] [U-Boot, 2/3] env: Fix missed getenv_ulong to env_get_ulong conversion
Tom Rini
- [U-Boot] [U-Boot, 3/3] defconfig: k2x_hs_evm: Re-enable TI_SECURE_DEVICE in HS K2x parts
Tom Rini
- [U-Boot] pci: Fix decode regions for memory banks
Tom Rini
- [U-Boot] ns16550: Fix mem mapped endian check
Tom Rini
- [U-Boot] [U-Boot,v2] fdt: Fixup only valid memory banks
Tom Rini
- [U-Boot] configs: am335x_evm_usbspl: Add CONFIG_SPL_NET_VCI_STRING
Tom Rini
- [U-Boot] [U-Boot,v2] net: Remove Xilinx ll_temac driver
Tom Rini
- [U-Boot] tools/kwbimage: fix LibreSSL build
Tom Rini
- [U-Boot] arm64: show_regs: Dump the LRs HW values
Tom Rini
- [U-Boot] Makefile: Don't mess with .text section location for selected arches
Tom Rini
- [U-Boot] sf: Add ISSI IS25LP256 entry
Tom Rini
- [U-Boot] omap3_logic: Fix Environmental location
Tom Rini
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PATCH 1/2] board/cadence/xtfpga: move SYS_MONITOR_LEN to Kconfig
Tom Rini
- [U-Boot] [U-Boot, V2, 1/2] Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
Tom Rini
- [U-Boot] [U-Boot,V2,2/2] Remove config_distro_defaults.h
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Tom Rini
- [U-Boot] [PATCH v3] imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Tom Rini
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Tom Rini
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-elf.srec if CONFIG_REMAKE_ELF is defined
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-elf.srec on Gen3
Tom Rini
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Tom Rini
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Tom Rini
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-elf.srec if CONFIG_REMAKE_ELF is defined
Tom Rini
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Tom Rini
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Tom Rini
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Tom Rini
- [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
Tom Rini
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Tom Rini
- [U-Boot] [U-Boot, v3, 01/11] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Tom Rini
- [U-Boot] [U-Boot, v3, 02/11] Prepare for multiple bootcount drivers
Tom Rini
- [U-Boot] [U-Boot, v3, 03/11] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 04/11] Convert CONFIG_BOOTCOUNT_ENV to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 05/11] Convert CONFIG_BOOTCOUNT_RAM to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 06/11] Convert CONFIG_BOOTCOUNT_I2C to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 07/11] Convert CONFIG_BOOTCOUNT_EXT to Kconfig
Tom Rini
- [U-Boot] [U-Boot,v3,08/11] Integrate AT91 bootcount driver
Tom Rini
- [U-Boot] [U-Boot, v3, 09/11] Migrate generic bootcount to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 10/11] Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 11/11] Remove CONFIG_SYS_BOOTCOUNT_SINGLEWORD
Tom Rini
- [U-Boot] [PATCH] bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] [PATCH v1 2/5] bootcount: Add function wrappers to handle bootcount increment and error checking
Tom Rini
- [U-Boot] [PATCH v1 3/5] bootcount: u-boot: Do not increment bootcount if already done in SPL
Tom Rini
- [U-Boot] [PATCH v4 07/12] tools: mkimage: add tee-bootable image type
Tom Rini
- [U-Boot] [PATCH v1 3/5] bootcount: u-boot: Do not increment bootcount if already done in SPL
Tom Rini
- [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [PATCH] spi: Zap mpc8xx_spi driver
Tom Rini
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Tom Rini
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-spl.srec target
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-spl.srec on Gen2
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-spl.srec on Gen2
Tom Rini
- [U-Boot] [PATCH] board: am335x: Set serial# variable
Tom Rini
- [U-Boot] [PATCH 1/2] omap: Fix AM335x build with enabled fastboot flash
Tom Rini
- [U-Boot] [PATCH 2/2] configs: am335x_boneblack: Enable fastboot flash capability
Tom Rini
- [U-Boot] [PATCH] board: am335x: Set serial# variable
Tom Rini
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Tom Rini
- [U-Boot] [PATCH v2 1/1] board: am335x: Set serial# variable
Tom Rini
- [U-Boot] [U-Boot PATCH 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
Tom Rini
- [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH v2 1/1] board: am335x: Set serial# variable
Tom Rini
- [U-Boot] [PATCH 0/3] add inital SF tests
Tom Rini
- [U-Boot] [U-Boot, 1/4] fpga: Added Kconfig support for FPGA_SPARTAN3
Tom Rini
- [U-Boot] [U-Boot, 3/4] arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL
Tom Rini
- [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET
Tom Rini
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [PATCH 1/3] sunxi: Add selective PHY address
Maxime Ripard
- [U-Boot] [PATCH 2/3] sunxi: Add A20-SOM204-EVB board
Maxime Ripard
- [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
Maxime Ripard
- [U-Boot] [PATCH 1/3] Move CONFIG_PHY_ADDR to Kconfig
Maxime Ripard
- [U-Boot] [PATCH 2/3] sunxi: Add A20-SOM204-EVB board
Maxime Ripard
- [U-Boot] [PATCH 3/3] sunxi: Add A20-SOM204-EVB-eMMC board
Maxime Ripard
- [U-Boot] [PATCH] MAINTAINERS: Update email address for Maxime Ripard
Maxime Ripard
- [U-Boot] [PATCH 3/3] sunxi: Add A20-SOM204-EVB-eMMC board
Maxime Ripard
- [U-Boot] [PATCH 1/1] mmc: sunxi: support cd-inverted
Maxime Ripard
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Maxime Ripard
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Maxime Ripard
- [U-Boot] [PATCH] MAINTAINERS: Update email address for Maxime Ripard
Maxime Ripard
- [U-Boot] [PATCH v2] MAINTAINERS: Update email address for Maxime Ripard
Maxime Ripard
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Maxime Ripard
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Maxime Ripard
- [U-Boot] [PATCH] sunxi: Add reg property for USB OTG node in sun8i-a83t.dtsi
Maxime Ripard
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Maxime Ripard
- [U-Boot] [PATCH v4 25/34] configs: bananapi-m64: Enable USB OTG peripheral mode
Maxime Ripard
- [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry
Maxime Ripard
- [U-Boot] [PATCH 05/11] sunxi: Add PMIC_SUNXI kconfig entry
Maxime Ripard
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Maxime Ripard
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Maxime Ripard
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH 1/2] env: Fix env_load_location
Maxime Ripard
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
Maxime Ripard
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Maxime Ripard
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Maxime Ripard
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
Maxime Ripard
- [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry
Maxime Ripard
- [U-Boot] [PATCH v2 0/7] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry
Maxime Ripard
- [U-Boot] [PATCH] env: restore old env_get_char() behaviour
Maxime Ripard
- [U-Boot] [PATCH] sunxi: video: lcdc: fix HSYNC and VSYNC polarity
Maxime Ripard
- [U-Boot] [PATCH] sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs
Maxime Ripard
- [U-Boot] [RFC] Make U-Boot log great again
Maxime Ripard
- [U-Boot] [RFC] Make U-Boot log great again
Maxime Ripard
- [U-Boot] [RFC] Make U-Boot log great again
Maxime Ripard
- [U-Boot] [PATCH for 2018.03] sunxi: README.sunxi64: Add hint about non-debug ATF
Maxime Ripard
- [U-Boot] [RFC] Make U-Boot log great again
Maxime Ripard
- [U-Boot] [PATCH v2 11/20] sunxi: spl: deassert the NAND controller reset line
Maxime Ripard
- [U-Boot] [PATCH v2 16/20] sunxi: dts: enable NAND on NES classic
Maxime Ripard
- [U-Boot] [PATCH v2 17/20] sunxi: automatically select SPL_NAND_SUPPORT in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 18/20] sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 19/20] sunxi: move the NAND parameters to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 20/20] configs: add NAND support for NES Classic
Maxime Ripard
- [U-Boot] [PATCH v2 15/20] sunxi: allow NAND support in SPL to be compiled for sun8i platforms
Maxime Ripard
- [U-Boot] [PATCH v2 01/20] spl: fix binman_sym output check
Maxime Ripard
- [U-Boot] [PATCH v2 11/20] sunxi: spl: deassert the NAND controller reset line
Maxime Ripard
- [U-Boot] [PATCH v2 11/20] sunxi: spl: deassert the NAND controller reset line
Maxime Ripard
- [U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues
Peter Robinson
- [U-Boot] [PATCH v3 01/21] efi: Init the 'rows' and 'cols' variables
Peter Robinson
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Stefan Roese
- [U-Boot] arm: mvebu: ClearFog: booting u-boot from ssd?
Stefan Roese
- [U-Boot] [PATCH] configs: clearfog: enable random random MAC address
Stefan Roese
- [U-Boot] arm: mvebu: ClearFog: booting u-boot from ssd?
Stefan Roese
- [U-Boot] [PATCH v1 4/5] bootcount: display5: spl: Extend SPL to support bootcount checking
Stefan Roese
- [U-Boot] [PATCH v1 4/5] bootcount: display5: spl: Extend SPL to support bootcount checking
Stefan Roese
- [U-Boot] [PATCH v2 0/3] mips: bmips: add BCM6362 SoC support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/3] dm: cpu: bmips: add BCM6362 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 2/3] MIPS: add support for Broadcom MIPS BCM6362 SoC family
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 3/3] MIPS: add BMIPS Netgear DGND3700v2 board
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2] mips: bmips: select OF_EMBED for all boards
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/3] mips: bmips: add support for bcm6348 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/3] mips: bmips: add ct-5361 usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/4] bmips: add support for bcm6358 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/4] phy: add support for bcm6358 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/4] mips: bmips: add support for bcm6358 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/4] mips: bmips: add hg556a usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 4/4] mips: bmips: add nb4-ser usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/9] bmips: add support for bcm6368 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/9] phy: add support for bcm6368 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/9] mips: bmips: add support for bcm6368 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/9] mips: bmips: add wap-5813n usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 4/9] mips: bmips: add support for bcm6328 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 5/9] mips: bmips: add ar-5387un usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 6/9] mips: bmips: add support for bcm6362 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 7/9] mips: bmips: add dgnd3700v2 usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 8/9] mips: bmips: add support for bcm63268 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 9/9] mips: bmips: add vr-3032u usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/3] bmips: add support for bcm6318 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/3] phy: add support for bcm6318 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/3] mips: bmips: add support for bcm6318 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/3] mips: bmips: add ar-5315 usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/9] phy: add support for bcm6368 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 0/9] bmips: add support for bcm6368 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/9] phy: add support for bcm6368 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 2/9] mips: bmips: add support for bcm6368 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 3/9] mips: bmips: add wap-5813n usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 4/9] mips: bmips: add support for bcm6328 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 5/9] mips: bmips: add ar-5387un usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 6/9] mips: bmips: add support for bcm6362 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 7/9] mips: bmips: add dgnd3700v2 usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 8/9] mips: bmips: add support for bcm63268 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 9/9] mips: bmips: add vr-3032u usb support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 0/3] bmips: add support for bcm6318 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/3] phy: add support for bcm6318 usbh phy
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 2/3] mips: bmips: add support for bcm6318 usb
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 3/3] mips: bmips: add ar-5315 usb support
Álvaro Fernández Rojas
- [U-Boot] [RFC 00/14] bmips: add bcm6348-enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC 01/14] dma: add dma channels support and improve uclass
Álvaro Fernández Rojas
- [U-Boot] [RFC 02/14] dma: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC 03/14] bmips: bcm6338: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC 04/14] bmips: bcm6348: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC 05/14] bmips: bcm6358: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC 06/14] phy: add support for internal phys
Álvaro Fernández Rojas
- [U-Boot] [RFC 07/14] net: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC 08/14] bmips: bcm6338: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC 09/14] bmips: enable f at st1704 enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC 10/14] bmips: bcm6348: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC 11/14] bmips: enable ct-5361 enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC 12/14] bmips: bcm6358: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC 13/14] bmips: enable hg556a enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC 14/14] bmips: enable nb4-ser enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC 00/14] bmips: add bcm6348-enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 00/15] bmips: add bcm6348-enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 01/15] dma: move dma_ops to dma-uclass.h
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 02/15] dma: add channels support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 03/15] dma: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 04/15] bmips: bcm6338: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 05/15] bmips: bcm6348: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 06/15] bmips: bcm6358: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 07/15] phy: add support for internal phys
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 08/15] net: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 09/15] bmips: bcm6338: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 10/15] bmips: enable f at st1704 enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 11/15] bmips: bcm6348: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 12/15] bmips: enable ct-5361 enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 13/15] bmips: bcm6358: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 14/15] bmips: enable hg556a enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 15/15] bmips: enable nb4-ser enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 01/15] dma: move dma_ops to dma-uclass.h
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 02/15] dma: add channels support
Álvaro Fernández Rojas
- [U-Boot] [RFC v2 02/15] dma: add channels support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 00/15] bmips: add bcm6348-enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 01/15] dma: move dma_ops to dma-uclass.h
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 02/15] dma: add channels support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 03/15] dma: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 04/15] bmips: bcm6338: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 05/15] bmips: bcm6348: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 06/15] bmips: bcm6358: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 07/15] phy: add support for internal phys
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 08/15] net: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 09/15] bmips: bcm6338: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 10/15] bmips: enable f at st1704 enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 11/15] bmips: bcm6348: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 12/15] bmips: enable ct-5361 enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 13/15] bmips: bcm6358: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 14/15] bmips: enable hg556a enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 15/15] bmips: enable nb4-ser enet support
Álvaro Fernández Rojas
- [U-Boot] [RFC v3 03/15] dma: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] Uboot as x86_64 EFI payload
Javier Santos Romo
- [U-Boot] U-Boot 2011.09, Kernel 3.0.30, Buildroot (rootfs) 2011.11 multi-image boot issue
Eldor Rødseth
- [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)
Zoran S
- [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)
Zoran S
- [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)
Zoran S
- [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command
Shyam Saini
- [U-Boot] [PATCH v3 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry
Shyam Saini
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Thomas Schaefer
- [U-Boot] Antwort: [PATCH 1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
Hannes Schmelzer
- [U-Boot] Antwort: [PATCH 3/8] Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig
Hannes Schmelzer
- [U-Boot] [PATCH] pci: Fix decode regions for memory banks
Hannes Schmelzer
- [U-Boot] Antwort: [PATCH] ns16550: Fix mem mapped endian check
Hannes Schmelzer
- [U-Boot] [PATCH] x86: mmc: Fix mapping of BAR memory
Hannes Schmelzer
- [U-Boot] Make display initialization more flexible
Christian Schnell
- [U-Boot] [RESEND PATCH v2 1/6] i2c: fsl_i2c: Fix style violations
Heiko Schocher
- [U-Boot] [RESEND PATCH v2 2/6] i2c: fsl_i2c: Remove inline declarations
Heiko Schocher
- [U-Boot] [RESEND PATCH v2 3/6] i2c: fsl_i2c: Make live-tree compatible
Heiko Schocher
- [U-Boot] [RESEND PATCH v2 4/6] i2c: ihs_i2c: Prepare DM conversion
Heiko Schocher
- [U-Boot] [RESEND PATCH v2 5/6] i2c: ihs_i2c: Make DM compatible
Heiko Schocher
- [U-Boot] [RESEND PATCH v2 6/6] i2c: ihs_i2c: Factor out send_buffer method
Heiko Schocher
- [U-Boot] [PATCH 1/1] i2c: mvtwsi.c: Avoid NULL dereference
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH v2] ubi: Ensure no fastmap flush after uif_close
Heiko Schocher
- [U-Boot] Pull request: u-boot-ubi/master
Heiko Schocher
- [U-Boot] [PATCH] mtd: ubi: Fix worker handling
Heiko Schocher
- [U-Boot] [PATCH v2 1/4] Convert CONFIG_IMX_WATCHDOG to Kconfig and remove HW_WATCHDOG
Heiko Schocher
- [U-Boot] [PATCH v2 2/4] Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig
Heiko Schocher
- [U-Boot] [PATCH v2 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Heiko Schocher
- [U-Boot] [ANN] U-Boot v2018.03-rc2 released
Heiko Schocher
- [U-Boot] [PATCH v2 4/4] Convert CONFIG_HW_WATCHDOG to Kconfig
Heiko Schocher
- [U-Boot] [PATCH 1/1] i2c: mvtwsi.c: Fix set speed
Heiko Schocher
- [U-Boot] [PATCH 1/1] i2c: mvtwsi.c: Fix set speed
Heiko Schocher
- [U-Boot] [PATCH] mtd: ubi: Fix worker handling
Heiko Schocher
- [U-Boot] Fwd: Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] Pull request: u-boot-ubi/master
Heiko Schocher
- [U-Boot] [UBOOT PATCH 1/6] i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ
Heiko Schocher
- [U-Boot] [PATCH] bootcount: flush after storing the bootcounter
Heiko Schocher
- [U-Boot] [PATCH 1/1] efi_driver: return type of efi_driver_init()
Heinrich Schuchardt
- [U-Boot] [U-Boot, v2, 10/15] dm: mmc: sunxi: Add support for driver model
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] mmc: sunxi: support cd-inverted
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: use correct compiler flags for miniapps
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add missing EFI_RESET_PLATFORM_SPECIFIC
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add missing runtime services stubs
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: check initialization of EFI subsystem is successful
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do_bootefi_exec should always return an EFI status code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for v2018.03] efi_loader: create stub for CreateEventEx
Heinrich Schuchardt
- [U-Boot] [PATCH v4 2/2] efi_selftest: provide a test for block io
Heinrich Schuchardt
- [U-Boot] [PATCH v3 3/4] dm: video: use constants to refer to colors
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for V2018.03] efi_loader: do not use 2.0.5 as UEFI revision number
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: show UEFI revision in helloworld
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: Initial EFI_DEVICE_PATH_UTILITIES_PROTOCOL
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: check initialization of EFI subsystem is successful
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do_bootefi_exec should always return an EFI status code
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: add missing EFI_RESET_PLATFORM_SPECIFIC
Heinrich Schuchardt
- [U-Boot] [PATCH v3 3/4] dm: video: use constants to refer to colors
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] efi_loader: implement missing bit blit operations in gop
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] efi_loader: implement missing bit blit operations in gop
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] efi_selftest: test gop bitblt
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/2] efi_loader: implement missing bit blit operations in gop
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] efi_loader: implement missing bit blit operations in gop
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/2] efi_selftest: test gop bitblt
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Heinrich Schuchardt
- [U-Boot] efi_loader: patches for v2018.03-rc2
Heinrich Schuchardt
- [U-Boot] [PATCH v4 0/4] dm: video: Correct color ANSI escape sequence support
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/4] dm: video: show correct colors in graphical console
Heinrich Schuchardt
- [U-Boot] [PATCH v4 2/4] dm: video: correctly clean background in 16bit mode
Heinrich Schuchardt
- [U-Boot] [PATCH v4 3/4] dm: video: use constants to refer to colors
Heinrich Schuchardt
- [U-Boot] [PATCH v4 4/4] dm: video: support increased intensity (bold)
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Heinrich Schuchardt
- [U-Boot] [PATCH v3 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for v2018.03] efi_loader: correct efi_disk_register
Heinrich Schuchardt
- [U-Boot] [PATCH v3 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: add missing runtime services stubs
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: correct efi_disk_register
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] dm: core: fix typo in comment (device.h)
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for v2018.03] efi_driver: comment struct efi_driver_ops
Heinrich Schuchardt
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] fs: fat: avoid useless conversion when calling getcluster
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] fs: fat: avoid superfluous conversion calling set_cluster
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: scsi: move CMD_SCSI to device access commands
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] fs: fat: avoid useless conversion when calling getcluster
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] fs: fat: avoid superfluous conversion calling set_cluster
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] fs: fat: avoid useless conversion when calling get_cluster
Heinrich Schuchardt
- [U-Boot] [PATCH v2 00/11] efi_loader: error handling cmd/bootefi.c
Heinrich Schuchardt
- [U-Boot] [PATCH v2 01/11] efi_loader: efi_smbios_register should have a return value
Heinrich Schuchardt
- [U-Boot] [PATCH v2 02/11] efi_loader: return efi_status_t from efi_gop_register
Heinrich Schuchardt
- [U-Boot] [PATCH v2 03/11] efi_loader: return efi_status_t from efi_net_register
Heinrich Schuchardt
- [U-Boot] [PATCH v2 04/11] efi_loader: consistently return efi_status_t efi_watchdog_register
Heinrich Schuchardt
- [U-Boot] [PATCH v2 05/11] efi_loader: simplify calling efi_init_obj_list
Heinrich Schuchardt
- [U-Boot] [PATCH v2 06/11] efi_loader: exit status for efi_reset_system_init
Heinrich Schuchardt
- [U-Boot] [PATCH v2 07/11] efi_loader: efi_get_time_init should return status code
Heinrich Schuchardt
- [U-Boot] [PATCH v2 08/11] efi_loader: do_bootefi_exec should always return an EFI status code
Heinrich Schuchardt
- [U-Boot] [PATCH v2 09/11] efi_loader: check initialization of EFI subsystem is successful
Heinrich Schuchardt
- [U-Boot] [PATCH v2 10/11] efi_loader: support device tree for bootefi selftest
Heinrich Schuchardt
- [U-Boot] [PATCH v2 11/11] efi_selftest: check installation of the device tree
Heinrich Schuchardt
- [U-Boot] [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/2][for v2018.03] efi_loader: provide new doc/README.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2][for v2018.03] efi_loader: delete doc/README.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/2][for v2018.03] efi_loader: provide new doc/README.efi
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for v2018.03] efi_loader: check parameter in InstallConfigurationTable
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for v2018.03] efi_loader: clear signaled state in CheckEvent
Heinrich Schuchardt
- [U-Boot] [PATCH v2 07/16] sandbox: smbios: Update to support sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH 0/5] efi_loader: implement event groups
Heinrich Schuchardt
- [U-Boot] [PATCH 1/5] efi_loader: fix formatting errors
Heinrich Schuchardt
- [U-Boot] [PATCH 2/5] efi_loader: manage events in a linked list
Heinrich Schuchardt
- [U-Boot] [PATCH 3/5] efi_loader: define GUIDS for event groups
Heinrich Schuchardt
- [U-Boot] [PATCH 4/5] efi_loader: implement event groups
Heinrich Schuchardt
- [U-Boot] [PATCH 5/5] efi_selftest: unit test for event groups
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1][for v2018.03] efi_loader: correct input of special keys
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1][for v2018.03] efi_loader: correct input of special keys
Heinrich Schuchardt
- [U-Boot] [PATCH v3 00/21] efi: Enable basic sandbox support for EFI loader
Heinrich Schuchardt
- [U-Boot] [PATCH v3 01/21] efi: Init the 'rows' and 'cols' variables
Heinrich Schuchardt
- [U-Boot] [PATCH v3 02/21] efi: Update efi_smbios_register() to return error code
Heinrich Schuchardt
- [U-Boot] [PATCH v3 03/21] efi: Move the init check inside efi_init_obj_list()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 18/21] efi: sandbox: Add a simple 'bootefi test' command
Heinrich Schuchardt
- [U-Boot] [PATCH v3 09/21] sandbox: Add a setjmp() implementation
Heinrich Schuchardt
- [U-Boot] [PATCH v3 08/21] sandbox: smbios: Update to support sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH v3 00/21] efi: Enable basic sandbox support for EFI loader
Heinrich Schuchardt
- [U-Boot] [PATCH v3 07/21] efi: sandbox: Adjust memory usage for sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] usb: kbd: select SYS_STDIO_DEREGISTER
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] usb: kbd: implement special keys
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] usb: kbd: implement special keys
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] usb: kbd: implement special keys
Heinrich Schuchardt
- [U-Boot] Fwd: [PATCH v2 2/2][for v2018.03] efi_loader: provide new doc/README.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET
Heinrich Schuchardt
- [U-Boot] [PATCH 1/9] phy: add support for bcm6368 usbh phy
Daniel Schwierzeck
- [U-Boot] [PATCH 1/3] phy: add support for bcm6318 usbh phy
Daniel Schwierzeck
- [U-Boot] [PATCH 1/4] phy: add support for bcm6358 usbh phy
Daniel Schwierzeck
- [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy
Daniel Schwierzeck
- [U-Boot] [PATCH] buildman: support newer gcc versions from kernel.org
Daniel Schwierzeck
- [U-Boot] [PATCH] buildman: support newer gcc versions from kernel.org
Daniel Schwierzeck
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Sebastien
- [U-Boot] [PATCH 2/2] arm: socfpga: cyclone5: Ensure spi-flash in the compatible string
See, Chin Liang
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
See, Chin Liang
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
See, Chin Liang
- [U-Boot] [PATCH] configs: clearfog: enable random random MAC address
Baruch Siach
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Michal Simek
- [U-Boot] [PATCH] fpga: Simplify error path in fpga_add
Michal Simek
- [U-Boot] [RFC PATCH 1/2] zynq: Rework FPGA initialization
Michal Simek
- [U-Boot] [RFC PATCH 2/2] zynq: board: Remove checkboard and enable DISPLAY_CPUINFO
Michal Simek
- [U-Boot] [PATCH 3/5] zynq: Support CPU info display
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Convert board to use zynqmp-clk driver
Michal Simek
- [U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus
Michal Simek
- [U-Boot] [PATCH] spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guard
Michal Simek
- [U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus
Michal Simek
- [U-Boot] [PATCH] Kconfig: Use imply for network commands in distro default
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Sync mini defconfigs with latest fpga changes
Michal Simek
- [U-Boot] [PATCH] Kconfig: net: phylib: Phylib should depends on NET
Michal Simek
- [U-Boot] [RFC PATCH] Kconfig: cmd: Make networking command dependent on NET
Michal Simek
- [U-Boot] [PATCH v2] Kconfig: Select networking commands only when NET is enabled
Michal Simek
- [U-Boot] [PATCH v2] Kconfig: Select networking commands only when NET is enabled
Michal Simek
- [U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus
Michal Simek
- [U-Boot] [PATCH] omap4: sdp4430: Enable CONFIG_NET for this platform
Michal Simek
- [U-Boot] [PATCH v2] Kconfig: Select networking commands only when NET is enabled
Michal Simek
- [U-Boot] [PATCH] block: Migrate SystemACE chip to Kconfig
Michal Simek
- [U-Boot] [PATCH] SystemACE: Remove
Michal Simek
- [U-Boot] [PATCH 3/3] microblaze: bootm: Fix compiler warning
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Changed scratch address used by the alternate memory test
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Add support to load an app at EL1
Michal Simek
- [U-Boot] [PATCH] net: Remove Xilinx ll_temac driver
Michal Simek
- [U-Boot] [PATCH] net: zynq_gem: Dont run any phy detection logic for GMII case
Michal Simek
- [U-Boot] [PATCH v2] net: Remove Xilinx ll_temac driver
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Enable newer pmufw versions
Michal Simek
- [U-Boot] [PATCH] clk: zynq: Show watchdog clock rate properly
Michal Simek
- [U-Boot] [PATCH 1/3] watchdog: Add Cadence watchdog driver
Michal Simek
- [U-Boot] [PATCH 2/3] arm: zynq: Wire watchdog internals
Michal Simek
- [U-Boot] [PATCH 3/3] arm: zynq: Enable cadence driver on zc706
Michal Simek
- [U-Boot] [PATCH v2 1/3] watchdog: Add Cadence watchdog driver
Michal Simek
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Michal Simek
- [U-Boot] [PATCH v2 3/3] arm: zynq: Enable cadence driver on zc706
Michal Simek
- [U-Boot] [UBOOT PATCH 1/2] qspi: Added Kconfig support for CONFIG_SYS_ZYNQ_QSPI_WAIT
Michal Simek
- [U-Boot] [UBOOT PATCH 2/2] spi: Added Kconfig support for SYS_ZYNQ_SPI_WAIT and XILINX_SPI_IDLE_VAL
Michal Simek
- [U-Boot] [UBOOT PATCH 0/4] fpga: Moved fpga u-boot headers to the Kconfig
Michal Simek
- [U-Boot] [UBOOT PATCH 1/2] microblaze: Added Kconfig support for CONFIG_XILINX_GPIO
Michal Simek
- [U-Boot] [UBOOT PATCH 2/2] microblaze: wdt: Added Kconfig support for CONFIG_XILINX_TB_WATCHDOG
Michal Simek
- [U-Boot] [UBOOT PATCH 1/6] i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ
Michal Simek
- [U-Boot] [UBOOT PATCH 6/6] i2c: Added kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1
Michal Simek
- [U-Boot] [UBOOT PATCH 0/6] i2c: Moved i2c u-boot headers to Kconfig
Michal Simek
- [U-Boot] [UBOOT PATCH 1/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI0
Michal Simek
- [U-Boot] [UBOOT PATCH 2/2] mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
Michal Simek
- [U-Boot] [UBOOT PATCH 1/2] eeprom: Added Kconfig support for ZYNQ_EEPROM
Michal Simek
- [U-Boot] [UBOOT PATCH 2/2] eeprom: Added Kconfig support for eeprom u-boot headers
Michal Simek
- [U-Boot] [UBOOT PATCH 2/2] eeprom: Added Kconfig support for eeprom u-boot headers
Michal Simek
- [U-Boot] [PATCH v2] arm64: zynqmp: Changed scratch address used by the alternate memory test
Michal Simek
- [U-Boot] [PATCH 1/2] arm: zynq: Setup the same bootcommand as for zc770 xm011 x8
Michal Simek
- [U-Boot] [PATCH 2/2] arm: zynq: Remove OF_EMBED configuration for zc770 xm011 x16
Michal Simek
- [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET
Michal Simek
- [U-Boot] [U-Boot, RFC] Kconfig: cmd: Make networking command dependent on NET
Michal Simek
- [U-Boot] [PATCH 3/3] test/py: add spi_flash tests
Michal Simek
- [U-Boot] [PATCH 0/3] add inital SF tests
Michal Simek
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Michal Simek
- [U-Boot] [PATCH v2 1/3] watchdog: Add Cadence watchdog driver
Michal Simek
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Michal Simek
- [U-Boot] [PATCH v2 1/3] watchdog: Add Cadence watchdog driver
Michal Simek
- [U-Boot] [PATCH v2 2/3] arm: zynq: Wire watchdog internals
Michal Simek
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Goldschmidt Simon
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Goldschmidt Simon
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Goldschmidt Simon
- [U-Boot] [PATCH] env: restore old env_get_char() behaviour
Goldschmidt Simon
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
Goldschmidt Simon
- [U-Boot] [PATCH v2 3/4] Convert socfpga: select CONFIG_HW_WATCHDOG support for ARCH_SOCFPGA
Goldschmidt Simon
- [U-Boot] [PATCH v3] sandbox: Add 64-bit sandbox
Mario Six
- [U-Boot] Port help for qca board
Ansuel Smith
- [U-Boot] malloc crash
Ansuel Smith
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Ira Snyder
- [U-Boot] [U-Boot PATCH 0/2] Adds support for secure boot on TCI6630K2L HS devices
Madan Srinivas
- [U-Boot] [U-Boot PATCH 1/2] configs: k2l: Updates u-boot env to install secure boot monitor
Madan Srinivas
- [U-Boot] [U-Boot PATCH 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
Madan Srinivas
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
Rajat Srivastava
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
Rajat Srivastava
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
Rajat Srivastava
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
Rajat Srivastava
- [U-Boot] [RFC v3 03/15] dma: add bcm6348-iudma support
Grygorii Strashko
- [U-Boot] [RFC v3 03/15] dma: add bcm6348-iudma support
Grygorii Strashko
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
York Sun
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
York Sun
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
York Sun
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
York Sun
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
York Sun
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
York Sun
- [U-Boot] [PATCH 1/2] env: Fix env_load_location
York Sun
- [U-Boot] [PATCH 2/2] env: Add back default action of get_char in env_get_char()
York Sun
- [U-Boot] [PATCH v3 1/3] drivers/ddr/fsl: Fix DDR4 RDIMM support
York Sun
- [U-Boot] [PATCH 1/2] env: Fix env_load_location
York Sun
- [U-Boot] [PATCH] env: restore old env_get_char() behaviour
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH] ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig
York Sun
- [U-Boot] [PATCH] ls1088a: qspi: Enable XIP mode above 16 MB addresses
York Sun
- [U-Boot] [PATCH v3] armv8: Remove dependency of SERDES for LSCH2 and LSCH3
York Sun
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support
York Sun
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
York Sun
- [U-Boot] [PATCH] PowerPC: phy: enable all phylib drivers when use phylib and tsec enet
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
York Sun
- [U-Boot] Please fix ls1046ardb
York Sun
- [U-Boot] Please fix ls1046ardb
York Sun
- [U-Boot] [PATCH v2 00/13] LS1012A PFE driver patch series
York Sun
- [U-Boot] Crash observed while running U-Boot on LS1088 SD-boot
York Sun
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
York Sun
- [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio
York Sun
- [U-Boot] [PATCH 3/3] Powerpc: pcie: Make pcie link state judgement more specific
York Sun
- [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio
York Sun
- [U-Boot] [PATCH] armv8: sec_firmware: Remove JR3 from device tree node in all cases
York Sun
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH 2/3] sunxi: Add A20-SOM204-EVB board
Jagan Teki
- [U-Boot] [PATCH] sunxi: Add reg property for USB OTG node in sun8i-a83t.dtsi
Jagan Teki
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Jagan Teki
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Jagan Teki
- [U-Boot] [PATCH v4 00/34] phy: sunxi: Add Allwinner sun4i USB PHY
Jagan Teki
- [U-Boot] [PATCH v4 01/34] usb: sunxi: Simplify ccm reg base code
Jagan Teki
- [U-Boot] [PATCH v4 02/34] musb: sunxi: Add proper macros instead of numericals
Jagan Teki
- [U-Boot] [PATCH v4 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata
Jagan Teki
- [U-Boot] [PATCH v4 04/34] musb: sunxi: Add fifo config
Jagan Teki
- [U-Boot] [PATCH v4 05/34] sunxi: clock: Fix clock gating for H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v4 06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5
Jagan Teki
- [U-Boot] [PATCH v4 07/34] sunxi: clock: Fix OHCI clock gating for H3/H5
Jagan Teki
- [U-Boot] [PATCH v4 08/34] musb: sunxi: Add support for H3/H5A64
Jagan Teki
- [U-Boot] [PATCH v4 09/34] phy: Add Allwinner A64 USB PHY driver
Jagan Teki
- [U-Boot] [PATCH v4 10/34] phy: sun4i-usb: Add id_detect and vbus_detect ops
Jagan Teki
- [U-Boot] [PATCH v4 11/34] phy: sun4i-usb: Add H3/H5 PHY config
Jagan Teki
- [U-Boot] [PATCH v4 12/34] phy: sun4i-usb: Add V3S PHY config
Jagan Teki
- [U-Boot] [PATCH v4 13/34] phy: sun4i-usb: Add A83T USB PHY config
Jagan Teki
- [U-Boot] [PATCH v4 14/34] phy: sun4i-usb: Add A10/A13/A20 PHY config
Jagan Teki
- [U-Boot] [PATCH v4 15/34] phy: sun4i-usb: Add A31 PHY config
Jagan Teki
- [U-Boot] [PATCH v4 16/34] phy: sun4i-usb: Add A33 USB PHY config
Jagan Teki
- [U-Boot] [PATCH v4 17/34] phy: sun4i-usb: Add A23 USB PHY config
Jagan Teki
- [U-Boot] [PATCH v4 18/34] device-tree-bindings: phy: Sync sun4i-usb-phy bindings
Jagan Teki
- [U-Boot] [PATCH v4 19/34] board: sunxi: Use generic-phy for board_usb_cable_connected
Jagan Teki
- [U-Boot] [PATCH v4 20/34] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
Jagan Teki
- [U-Boot] [PATCH v4 21/34] usb: sunxi: Switch to use generic-phy
Jagan Teki
- [U-Boot] [PATCH v4 22/34] sunxi: Drop legacy usb_phy.c
Jagan Teki
- [U-Boot] [PATCH v4 23/34] sunxi: h3: Sync OTG and HCI nodes from Linux DT
Jagan Teki
- [U-Boot] [PATCH v4 24/34] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux
Jagan Teki
- [U-Boot] [PATCH v4 25/34] configs: bananapi-m64: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v4 26/34] ARM: dts: sun8i: a83t: Sync usbphy node from Linux
Jagan Teki
- [U-Boot] [PATCH v4 27/34] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v4 28/34] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v4 29/34] configs: bananapi-m2-plus: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v4 30/34] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
Jagan Teki
- [U-Boot] [PATCH v4 31/34] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v4 32/34] configs: orangepi-pc2: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v4 33/34] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v4 34/34] configs: orangepi-prime: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH 00/11] arm: sunxi: Use proper and meaningful Kconfig entries
Jagan Teki
- [U-Boot] [PATCH 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
Jagan Teki
- [U-Boot] [PATCH 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry
Jagan Teki
- [U-Boot] [PATCH 03/11] sunxi: Use MFD_SUN6I_PRCM if used
Jagan Teki
- [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry
Jagan Teki
- [U-Boot] [PATCH 05/11] sunxi: Add PMIC_SUNXI kconfig entry
Jagan Teki
- [U-Boot] [PATCH 06/11] sunxi: add DRAM_SUN6I kconfig
Jagan Teki
- [U-Boot] [PATCH 07/11] sunxi: Add DRAM_SUN4I kconfig entry
Jagan Teki
- [U-Boot] [PATCH 08/11] sunxi: Add DRAM_SUN9I kconfig entry
Jagan Teki
- [U-Boot] [PATCH 09/11] sunxi: Add DRAM_SUN8I_A23 kconfig entry
Jagan Teki
- [U-Boot] [PATCH 10/11] sunxi: Add DRAM_SUN8I_A33 kconfig entry
Jagan Teki
- [U-Boot] [PATCH 11/11] sunxi: Add DRAM_SUN8I_A83T kconfig entry
Jagan Teki
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH] arm: sunxi: Move spl spi sunxi code to mach-sunxi
Jagan Teki
- [U-Boot] [PATCH v2 1/2] i.MX6: nand: add nandbcb update command
Jagan Teki
- [U-Boot] [PATCH v2 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry
Jagan Teki
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command
Jagan Teki
- [U-Boot] [PATCH v3 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry
Jagan Teki
- [U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Jagan Teki
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Jagan Teki
- [U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 1/7] sunxi: gpio: add missing compatible strings
Jagan Teki
- [U-Boot] Allwinner H5 builds broken in master
Jagan Teki
- [U-Boot] [PATCH v2 0/7] sunxi: sun8i-emac: Update DT bindings
Jagan Teki
- [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries
Jagan Teki
- [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 03/11] sunxi: Use MFD_SUN6I_PRCM if used
Jagan Teki
- [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 05/11] sunxi: Add PMIC_AXP kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 06/11] sunxi: add DRAM_SUN6I kconfig
Jagan Teki
- [U-Boot] [PATCH v2 07/11] sunxi: Add DRAM_SUN4I kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 08/11] sunxi: Add DRAM_SUN9I kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 09/11] sunxi: Add DRAM_SUN8I_A23 kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 10/11] sunxi: Add DRAM_SUN8I_A33 kconfig entry
Jagan Teki
- [U-Boot] [PATCH v2 11/11] sunxi: Add DRAM_SUN8I_A83T kconfig entry
Jagan Teki
- [U-Boot] [PATCH v4 01/34] usb: sunxi: Simplify ccm reg base code
Jagan Teki
- [U-Boot] [PATCH v4 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata
Jagan Teki
- [U-Boot] [PATCH v4 04/34] musb: sunxi: Add fifo config
Jagan Teki
- [U-Boot] rk3288: broken boot
Jagan Teki
- [U-Boot] rk3288: broken boot
Jagan Teki
- [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
Jagan Teki
- [U-Boot] rk3288: broken boot
Jagan Teki
- [U-Boot] [PATCH 1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Jagan Teki
- [U-Boot] [PATCH 2/2] rockchip: rk3288: Fix TPL_TEXT_BASE
Jagan Teki
- [U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions
Jagan Teki
- [U-Boot] [PATCH v2 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
Jagan Teki
- [U-Boot] [PATCH v2 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
Jagan Teki
- [U-Boot] [PATCH v2 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
Jagan Teki
- [U-Boot] [PATCH v2 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa
Jagan Teki
- [U-Boot] [PATCH v2 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
Jagan Teki
- [U-Boot] [PATCH v2 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support
Jagan Teki
- [U-Boot] [PATCH v2 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa
Jagan Teki
- [U-Boot] [PATCH v2 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa
Jagan Teki
- [U-Boot] [PATCH v2 9/9] rk3288: vyasa: Add eMMC boot support
Jagan Teki
- [U-Boot] [PATCH v4 1/2] arm: sunxi: Allwinner A10 SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command
Jagan Teki
- [U-Boot] [PATCH 1/3] imx6ul: engicam: Drop isiot-mmc defconfig
Jagan Teki
- [U-Boot] [PATCH 2/3] imx6: engicam: Drop SPL_EXT_SUPPORT
Jagan Teki
- [U-Boot] [PATCH 3/3] imx6q: engicam: Use SPL_LOAD_FIT for MMC boards
Jagan Teki
- [U-Boot] [U-Boot,1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Jagan Teki
- [U-Boot] [PATCH] ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPL
Jagan Teki
- [U-Boot] [PATCH for 2018.03] sunxi: README.sunxi64: Add hint about non-debug ATF
Jagan Teki
- [U-Boot] [PATCH 2/3] imx6: engicam: Drop SPL_EXT_SUPPORT
Jagan Teki
- [U-Boot] [PATCH v2 1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Jagan Teki
- [U-Boot] [PATCH v2 2/2] rockchip: rk3288: Fix wrong TPL_TEXT_BASE
Jagan Teki
- [U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions
Jagan Teki
- [U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions
Jagan Teki
- [U-Boot] [PATCH] ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPL
Jagan Teki
- [U-Boot] [PATCH] spi: Zap mpc8xx_spi driver
Jagan Teki
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Jagan Teki
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Jagan Teki
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Jagan Teki
- [U-Boot] [UBOOT PATCH v2 0/2] spi: Moved spi u-bbot headers to Kconfig
Jagan Teki
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Joakim Tjernlund
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Joakim Tjernlund
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Joakim Tjernlund
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Joakim Tjernlund
- [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio
Joakim Tjernlund
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Dr. Philipp Tomsich
- [U-Boot] [PATCH] spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guard
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: pwm: convert to use live dt
Dr. Philipp Tomsich
- [U-Boot] [RESENT PATCH 1/2] core: add uclass_get_device_by_phandle_id() api
Dr. Philipp Tomsich
- [U-Boot] rk3288: broken boot
Dr. Philipp Tomsich
- [U-Boot] About convert to LIVE DT
Dr. Philipp Tomsich
- [U-Boot] rk3288: broken boot
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull from u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] rk3288: broken boot
Dr. Philipp Tomsich
- [U-Boot] rk3288: broken boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: add text_offset to kernel_addr_r on aarch64 platforms
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Dr. Philipp Tomsich
- [U-Boot] [PATCH 0/5] rockchip: video: migrate RK3399 w/ HDMI to livetree
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH] core: do not fail in device_probe() when clk set default fail
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: i2c: enable I2C inside GRF for rk3066 and rk3188
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api
Dr. Philipp Tomsich
- [U-Boot] [PATCH] NET: designware: fix clock enable
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: clk: rk3188: update dpll settings to make EMAC work
Dr. Philipp Tomsich
- [U-Boot] Moving the rk_board_late_init() hook to a device-model based implementation.
Dr. Philipp Tomsich
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH v4 08/12] doc: TEE: Add documentation describing TEE in u-boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2] rockchip: i2c: enable new I2C controller for rk3066 and rk3188
Dr. Philipp Tomsich
- [U-Boot] [PATCH] spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guard
Philipp Tomsich
- [U-Boot] [U-Boot,1/1] rockchip: gpio: remove dead code
Philipp Tomsich
- [U-Boot] [U-Boot, 1/9] rockchip: rk3399-evb: defconfig: Disable SPL_OF_PLATDATA for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Philipp Tomsich
- [U-Boot] [U-Boot, 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
Philipp Tomsich
- [U-Boot] [U-Boot, 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
Philipp Tomsich
- [U-Boot] [U-Boot, 5/9] rk3288: chrome: defconfig: Disable SPL_OF_PLATDATA for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, 7/9] rockchip: defconfig: Clean the unused pinctrl config
Philipp Tomsich
- [U-Boot] [U-Boot, 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
Philipp Tomsich
- [U-Boot] [U-Boot, 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
Philipp Tomsich
- [U-Boot] pwm-backlight: make power-supply as option
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/2] core: add uclass_get_device_by_phandle_id() api
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/2] pinctrl-uclass: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
Philipp Tomsich
- [U-Boot] [U-Boot, 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
Philipp Tomsich
- [U-Boot] [U-Boot, 7/9] rockchip: defconfig: Clean the unused pinctrl config
Philipp Tomsich
- [U-Boot] [U-Boot, 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
Philipp Tomsich
- [U-Boot] [U-Boot, 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
Philipp Tomsich
- [U-Boot] [U-Boot,1/1] rockchip: gpio: remove dead code
Philipp Tomsich
- [U-Boot] [U-Boot,1/1] rockchip: gpio: remove dead code
Philipp Tomsich
- [U-Boot] spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guard
Philipp Tomsich
- [U-Boot] [PATCH 1/2] rockchip: clk: rk3399: handle clk_enable requests for GMAC
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: clk: rk3368: handle clk_enable requests for GMAC
Philipp Tomsich
- [U-Boot] [U-Boot,2/2] rockchip: rk3288: Fix TPL_TEXT_BASE
Philipp Tomsich
- [U-Boot] [U-Boot,1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Philipp Tomsich
- [U-Boot] [U-Boot, 1/6] rockchip: clk: rk3036: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 2/6] rockchip: clk: rk3188: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 3/6] rockchip: clk: rk322x: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 4/6] rockchip: clk: rk3288: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 5/6] rockchip: clk: rk3328: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 6/6] rockchip: clk: rk1108: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 01/14] net: rockchip: Separate rmii and rgmii speed setup
Philipp Tomsich
- [U-Boot] [U-Boot, 02/14] net: rockchip: Add rmii interface and rmii speed setup for rk3228 and rk3328
Philipp Tomsich
- [U-Boot] [U-Boot,03/14] net: rockchip: Add integrated phy ops
Philipp Tomsich
- [U-Boot] [U-Boot, 04/14] net: rockchip: Add integrated phy for rk3228 and rk3328
Philipp Tomsich
- [U-Boot] [U-Boot, 05/14] cllk: rockchip: Change the defined name for CONFIG_RESET_ROCKCHIP
Philipp Tomsich
- [U-Boot] [U-Boot, 06/14] clk: rockchip: fix the gmac selection of pll source for rk322x
Philipp Tomsich
- [U-Boot] [U-Boot, 07/14] clk: rockchip: Init CPLL 600M for rk322x
Philipp Tomsich
- [U-Boot] [U-Boot, 08/14] clk: rockchip: Add SCLK_MAC_SRC clock rate setup
Philipp Tomsich
- [U-Boot] [U-Boot, 09/14] ARM: dts: rockchip: Add integrated phy reset and clock for rk322x
Philipp Tomsich
- [U-Boot] [U-Boot, 10/14] ARM: dts: rockchip: Enable integrated phy support for rk3229-evb
Philipp Tomsich
- [U-Boot] [U-Boot, 11/14] clk: rk3328: Implement the gmac2phy clock assignment
Philipp Tomsich
- [U-Boot] [U-Boot, 12/14] ARM: dts: rockchip: Add gmac2phy dts node for rk3328
Philipp Tomsich
- [U-Boot] [U-Boot, 13/14] ARM: dts: rockchip: Enable gmac2phy feature for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, 14/14] rockchip: defconfig: Enable CONFIG_RESET_ROCKCHIP for rk3329-evb and rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, 1/6] rockchip: clk: rk3036: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 2/6] rockchip: clk: rk3188: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 3/6] rockchip: clk: rk322x: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 4/6] rockchip: clk: rk3288: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 5/6] rockchip: clk: rk3328: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 6/6] rockchip: clk: rk1108: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 06/14] clk: rockchip: fix the gmac selection of pll source for rk322x
Philipp Tomsich
- [U-Boot] [U-Boot, 08/14] clk: rockchip: Add SCLK_MAC_SRC clock rate setup
Philipp Tomsich
- [U-Boot] [U-Boot, 09/14] ARM: dts: rockchip: Add integrated phy reset and clock for rk322x
Philipp Tomsich
- [U-Boot] [U-Boot, 14/14] rockchip: defconfig: Enable CONFIG_RESET_ROCKCHIP for rk3329-evb and rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, 1/9] rockchip: rk3399-evb: defconfig: Disable SPL_OF_PLATDATA for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
Philipp Tomsich
- [U-Boot] [U-Boot, 5/9] rk3288: chrome: defconfig: Disable SPL_OF_PLATDATA for new pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot, 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Philipp Tomsich
- [U-Boot] [U-Boot,2/2] rockchip: rk3288: Fix TPL_TEXT_BASE
Philipp Tomsich
- [U-Boot] [U-Boot,1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Philipp Tomsich
- [U-Boot] [U-Boot, 01/14] net: rockchip: Separate rmii and rgmii speed setup
Philipp Tomsich
- [U-Boot] [U-Boot, 10/14] ARM: dts: rockchip: Enable integrated phy support for rk3229-evb
Philipp Tomsich
- [U-Boot] [U-Boot, 12/14] ARM: dts: rockchip: Add gmac2phy dts node for rk3328
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: clk: rk3399: handle clk_enable requests for GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: clk: rk3368: handle clk_enable requests for GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, 1/6] rockchip: clk: rk3036: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 2/6] rockchip: clk: rk3188: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 3/6] rockchip: clk: rk322x: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 4/6] rockchip: clk: rk3288: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 5/6] rockchip: clk: rk3328: convert to use live dt
Philipp Tomsich
- [U-Boot] [U-Boot, 6/6] rockchip: clk: rk1108: convert to use live dt
Philipp Tomsich
- [U-Boot] rockchip: pwm: convert to use live dt
Philipp Tomsich
- [U-Boot] rockchip: add text_offset to kernel_addr_r on aarch64 platforms
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: clk: rk3399: handle set_rate/get_rate for PLL_PPLL
Philipp Tomsich
- [U-Boot] [PATCH 0/5] rockchip: video: migrate RK3399 w/ HDMI to livetree
Philipp Tomsich
- [U-Boot] [PATCH 1/5] core: ofnode: add ofnode_get_parent function
Philipp Tomsich
- [U-Boot] [PATCH 2/5] core: add ofnode_get_by_phandle() api
Philipp Tomsich
- [U-Boot] [PATCH 3/5] rockchip: video: rk_hdmi: migrate to livetree
Philipp Tomsich
- [U-Boot] [PATCH 4/5] rockchip: video: rk_vop: migrate to livetree
Philipp Tomsich
- [U-Boot] [PATCH 5/5] rockchip: video: update MAINTAINERS
Philipp Tomsich
- [U-Boot] [U-Boot,v2,1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/2] rockchip: rk3288: Fix wrong TPL_TEXT_BASE
Philipp Tomsich
- [U-Boot] rockchip: clk: rk3399: handle set_rate/get_rate for PLL_PPLL
Philipp Tomsich
- [U-Boot] [U-Boot,v2,9/9] rk3288: vyasa: Add eMMC boot support
Philipp Tomsich
- [U-Boot] [U-Boot,v2,9/9] rk3288: vyasa: Add eMMC boot support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
Philipp Tomsich
- [U-Boot] [U-Boot,v2,9/9] rk3288: vyasa: Add eMMC boot support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa
Philipp Tomsich
- [U-Boot] rockchip: clk: rk3188: update dpll settings to make EMAC work
Philipp Tomsich
- [U-Boot] rockchip: rk3188: add rk_board_late_init() hook
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] rockchip: clk: rk3188: update dpll settings to make EMAC work
Philipp Tomsich
- [U-Boot] rockchip: rk3188: add rk_board_late_init() hook
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] FEC Clock
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] sunxi: Add reg property for USB OTG node in sun8i-a83t.dtsi
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: [PATCH 2/5] sunxi: add Kconfig option for the maximum accessible DRAM
Chen-Yu Tsai
- [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] [PATCH] sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs
Chen-Yu Tsai
- [U-Boot] [U-Boot, v2, 10/15] dm: mmc: sunxi: Add support for driver model
Tuomas Tynkkynen
- [U-Boot] [PATCH 0/8] Migrate SPI drivers to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/8] spi: Migrate CONFIG_SH_SPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/8] spi: Migrate CONFIG_SH_QSPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 3/8] spi: Migrate CONFIG_MXS_SPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 4/8] spi: Migrate CONFIG_MXC_SPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 5/8] spi: Migrate CONFIG_MPC8XXX_SPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 6/8] spi: Migrate CONFIG_LPC32XX_SSP to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 7/8] spi: Migrate CONFIG_KIRKWOOD_SPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 8/8] spi: Migrate CONFIG_CF_SPI to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/1] fs: fat: avoid useless conversion when calling getcluster
Tuomas Tynkkynen
- [U-Boot] [PATCH] script: Make the get_default_envs.sh script working with newest u-boot
Tuomas Tynkkynen
- [U-Boot] [PATCH] script: Make the get_default_envs.sh script working with newest u-boot
Tuomas Tynkkynen
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/1] Broadwell-DE Implementation
Peter Tyser
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Peter Tyser
- [U-Boot] [PATCH v7 3/3] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Fix logic for setup of GUSBCFG->ULPI_UTMI_Sel bit
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: make casts of ep->dma_buf consistent
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Fix logic for setup of GUSBCFG->ULPI_UTMI_Sel bit
Marek Vasut
- [U-Boot] [PATCH v4 01/34] usb: sunxi: Simplify ccm reg base code
Marek Vasut
- [U-Boot] [PATCH v4 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata
Marek Vasut
- [U-Boot] [PATCH v4 04/34] musb: sunxi: Add fifo config
Marek Vasut
- [U-Boot] [PATCH v4 06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5
Marek Vasut
- [U-Boot] [PATCH v4 08/34] musb: sunxi: Add support for H3/H5A64
Marek Vasut
- [U-Boot] [PATCH v4 09/34] phy: Add Allwinner A64 USB PHY driver
Marek Vasut
- [U-Boot] [PATCH v4 18/34] device-tree-bindings: phy: Sync sun4i-usb-phy bindings
Marek Vasut
- [U-Boot] [PATCH v4 21/34] usb: sunxi: Switch to use generic-phy
Marek Vasut
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Marek Vasut
- [U-Boot] [PATCH v2] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Marek Vasut
- [U-Boot] [PATCH 1/3] cmd: fitupd: Convert CONFIG_CMD_FITUPD
Marek Vasut
- [U-Boot] [PATCH 2/3] cmd: fitupd: Convert CONFIG_UPDATE_TFTP and co.
Marek Vasut
- [U-Boot] [PATCH 3/3] tftp: update: Include missing cfi_flash.h header
Marek Vasut
- [U-Boot] [PATCH v4 01/34] usb: sunxi: Simplify ccm reg base code
Marek Vasut
- [U-Boot] [PATCH v4 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata
Marek Vasut
- [U-Boot] [PATCH v4 04/34] musb: sunxi: Add fifo config
Marek Vasut
- [U-Boot] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] U-Boot
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] U-Boot
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: use imply instead of select for spi/mmc
Marek Vasut
- [U-Boot] [PATCH] net: ravb: Initialize PHY in probe() once
Marek Vasut
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Marek Vasut
- [U-Boot] [PATCH] net: ravb: Initialize PHY in probe() once
Marek Vasut
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Marek Vasut
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Marek Vasut
- [U-Boot] [PATCH 1/2] dfu: Fix up the Kconfig mess
Marek Vasut
- [U-Boot] [PATCH 2/2] dfu: tftp: Fix arm64 build warnings
Marek Vasut
- [U-Boot] [PATCH] drivers/ddr/fsl: Dual-license DDR driver
Marek Vasut
- [U-Boot] [PATCH 10/10] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Marek Vasut
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Marek Vasut
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Marek Vasut
- [U-Boot] [RFC] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
Marek Vasut
- [U-Boot] [PATCH 1/2] dfu: Fix up the Kconfig mess
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable DTO support on Gen3
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable autocompletion on Gen3
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Fix the memory map on Gen3
Marek Vasut
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Marek Vasut
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH v8 1/4] spl: Remove static declaration on spl_mmc_find_device function
Marek Vasut
- [U-Boot] [PATCH v8 2/4] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
Marek Vasut
- [U-Boot] [PATCH v8 3/4] cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()
Marek Vasut
- [U-Boot] [PATCH v2] Revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable autocompletion on Gen2
Marek Vasut
- [U-Boot] [PATCH 1/4] serial: Replace CONFIG_ with CONFIG_IS_ENABLED
Marek Vasut
- [U-Boot] [PATCH 2/4] ARM: dts: rmobile: Make scif0 available before reloc on Porter
Marek Vasut
- [U-Boot] [PATCH 3/4] ARM: dts: rmobile: Make PFC and RST available before reloc
Marek Vasut
- [U-Boot] [PATCH 4/4] ARM: rmobile: Convert Porter to SPL
Marek Vasut
- [U-Boot] [PATCH V2 1/3] dfu: Fix up the Kconfig mess
Marek Vasut
- [U-Boot] [PATCH 2/3] dfu: Rename _FUNCTION_DFU to DFU_OVER_
Marek Vasut
- [U-Boot] [PATCH 3/3] dfu: tftp: Fix arm64 build warnings
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: rmobile: Move the u-boot, dm-pre-reloc into u-boot DTS on porter
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Reset ethernet PHY
Marek Vasut
- [U-Boot] [PATCH 1/4] net: sh_eth: Zap port variable
Marek Vasut
- [U-Boot] [PATCH 2/4] net: sh_eth: Return directly from sh_eth_recv_start
Marek Vasut
- [U-Boot] [PATCH 3/4] net: sh_eth: Fix checkpatch warning
Marek Vasut
- [U-Boot] [PATCH 4/4] net: sh_eth: Fix DT base address fetching
Marek Vasut
- [U-Boot] [PATCH 7/7] net: sh_eth: Add DM and DT support
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable convenient commands on Porter
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable CONFIG_LOADADDR on Gen2
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Set FDT/initramfs limits on Porter
Marek Vasut
- [U-Boot] [PATCH 1/4] i2c: rcar_iic: Allow IIC on RCar Gen2
Marek Vasut
- [U-Boot] [PATCH 2/4] ARM: dts: rmobile: Enable I2C6 on Porter
Marek Vasut
- [U-Boot] [PATCH 3/4] ARM: rmobile: Replace SH I2C with IIC on Porter
Marek Vasut
- [U-Boot] [PATCH 4/4] ARM: rmobile: Fix broken reset code on Porter
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Zap CONFIG_DM_I2C_COMPAT on Porter
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (18.02.2018)
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH 3/5] net: sh_eth: Fix unused variable warnings
Marek Vasut
- [U-Boot] [PATCH 1/5] sh: Use -m2a-nofpu only
Marek Vasut
- [U-Boot] [PATCH 2/5] travis-ci: Enable more SH to be tested
Marek Vasut
- [U-Boot] [PATCH 4/5] sh: Do not provide strncmp
Marek Vasut
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Marek Vasut
- [U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (19.02.2018)
Marek Vasut
- [U-Boot] [PATCH 3/5] net: sh_eth: Fix unused variable warnings
Marek Vasut
- [U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: kbd: select SYS_STDIO_DEREGISTER
Marek Vasut
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Reduce data buffer size to 16kB
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (20.02.2018)
Marek Vasut
- [U-Boot] [PATCH] sf: Add ISSI IS25LP256 entry
Marek Vasut
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
Marek Vasut
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Marek Vasut
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
Marek Vasut
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Marek Vasut
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH 1/2] usb: kbd: allow multibyte sequences to be put into ring buffer
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [RFC][PATCH] cmd: fdt: Fix fdt address information after the movement
Marek Vasut
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-elf.srec if CONFIG_REMAKE_ELF is defined
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-elf.srec on Gen3
Marek Vasut
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-elf.srec if CONFIG_REMAKE_ELF is defined
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-elf.srec on Gen3
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Add new CycloneV SoC Devboards DBM-SoC1 board
Marek Vasut
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-spl.srec target
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-spl.srec on Gen2
Marek Vasut
- [U-Boot] [PATCH 1/2] Makefile: add u-boot-elf.srec target
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-elf.srec on Gen3
Marek Vasut
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: rmobile: Import proper DTS for H2 Stout
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-spl.srec on Gen2
Marek Vasut
- [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Build u-boot-spl.srec on Gen2
Marek Vasut
- [U-Boot] [PATCH v2] arm: socfpga: cyclone5: Enable Macronix flash support
Marek Vasut
- [U-Boot] [RFC PATCH] Allow providing default environment from file
Rasmus Villemoes
- [U-Boot] [PATCH 1/3] ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG
Petr Vorel
- [U-Boot] [PATCH 2/3] Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig
Petr Vorel
- [U-Boot] [PATCH 3/3] Convert CONFIG_UBI_SILENCE_MSG to Kconfig
Petr Vorel
- [U-Boot] [PATCH] configs: am335x_evm: Disable ISO and EFI partitions in SPL
Lokesh Vutla
- [U-Boot] [PATCH] am335x_evm: Consolidate eMMC partitions with DFU info
Lokesh Vutla
- [U-Boot] [PATCH v2] Kconfig: Select networking commands only when NET is enabled
Lokesh Vutla
- [U-Boot] [PATCH v2] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Lokesh Vutla
- [U-Boot] [PATCH v3] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Lokesh Vutla
- [U-Boot] [PATCH 1/3] ARM: Kconfig: Move TI_SECURE_DEVICE to a common area
Lokesh Vutla
- [U-Boot] [PATCH 2/3] env: Fix missed getenv_ulong to env_get_ulong conversion
Lokesh Vutla
- [U-Boot] [PATCH 3/3] defconfig: k2x_hs_evm: Re-enable TI_SECURE_DEVICE in HS K2x parts
Lokesh Vutla
- [U-Boot] [U-Boot PATCH 1/2] configs: k2l: Updates u-boot env to install secure boot monitor
Lokesh Vutla
- [U-Boot] [U-Boot PATCH 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
Lokesh Vutla
- [U-Boot] How to test new bootloaders on Jetson TX1?
Varun Wadekar
- [U-Boot] How to test new bootloaders on Jetson TX1? - ATF
Varun Wadekar
- [U-Boot] How to test new bootloaders on Jetson TX1? - ATF
Varun Wadekar
- [U-Boot] [PATCH] vexpress: Sign up as maintainer
Linus Walleij
- [U-Boot] [PATCH] vexpress: Sign up as maintainer
Linus Walleij
- [U-Boot] [PATCH v2] vexpress: Sign up as maintainer
Linus Walleij
- [U-Boot] Secure Boot on Jetson TK1 and TK1-SOM
Daniel (Xiaolong) Wang
- [U-Boot] How to test new bootloaders on Jetson TX1?
Stephen Warren
- [U-Boot] [PATCH 1/2] test/py: add MMC/SD block read test
Stephen Warren
- [U-Boot] [PATCH 2/2] test/py: highlight warnings in the log summary
Stephen Warren
- [U-Boot] Support of kernels > 16 MiB on Raspberry Pi
Stephen Warren
- [U-Boot] [PATCH 0/3] add inital SF tests
Stephen Warren
- [U-Boot] How to test new bootloaders on Jetson TX1?
Tom Warren
- [U-Boot] SPARC support
Travis Waters
- [U-Boot] SPARC support
Travis Waters
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
Lothar Waßmann
- [U-Boot] [PATCH v9 4/4] common: Generic firmware loader for file system
Lothar Waßmann
- [U-Boot] [PATCH] serial: Make full device search optional
Derald Woods
- [U-Boot] [PATCH] serial: Make full device search optional
Derald Woods
- [U-Boot] [PATCH] serial: Make full device search optional
Derald Woods
- [U-Boot] [PATCH] serial: Make full device search optional
Derald Woods
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Derald Woods
- [U-Boot] [PATCH 0/2] ARM: omap3: evm: Fix serial driver compiler warnings
Derald D. Woods
- [U-Boot] [PATCH 1/2] ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warning
Derald D. Woods
- [U-Boot] [PATCH 2/2] ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefine
Derald D. Woods
- [U-Boot] [RFC PATCH 0/3] ARM: omap3: beagle, evm: synchronize common setup
Derald D. Woods
- [U-Boot] [RFC PATCH 1/3] ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
Derald D. Woods
- [U-Boot] [RFC PATCH 2/3] ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
Derald D. Woods
- [U-Boot] [RFC PATCH 3/3] ARM: omap3: evm: Sync with omap3_beagle configuration
Derald D. Woods
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Derald D. Woods
- [U-Boot] [PATCH v2 1/3] ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
Derald D. Woods
- [U-Boot] [PATCH v2 2/3] ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
Derald D. Woods
- [U-Boot] [PATCH v2 3/3] ARM: omap3: evm: Sync with omap3_beagle configuration
Derald D. Woods
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Derald D. Woods
- [U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup
Derald D. Woods
- [U-Boot] [PATCH v3 0/3] ARM: omap3: beagle, evm: synchronize common setup
Derald D. Woods
- [U-Boot] [PATCH v3 1/3] ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
Derald D. Woods
- [U-Boot] [PATCH v3 2/3] ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
Derald D. Woods
- [U-Boot] [PATCH v3 3/3] ARM: omap3: evm: Sync with omap3_beagle configuration
Derald D. Woods
- [U-Boot] [PATCH 0/9] Add common pinctrl driver support for rockchip
David Wu
- [U-Boot] [PATCH 1/9] rockchip: rk3399-evb: defconfig: Disable SPL_OF_PLATDATA for new pinctrl driver
David Wu
- [U-Boot] [PATCH 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
David Wu
- [U-Boot] [PATCH 3/9] ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
David Wu
- [U-Boot] [PATCH 4/9] ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
David Wu
- [U-Boot] [PATCH 5/9] rk3288: chrome: defconfig: Disable SPL_OF_PLATDATA for new pinctrl driver
David Wu
- [U-Boot] [PATCH 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
David Wu
- [U-Boot] [PATCH 7/9] rockchip: defconfig: Clean the unused pinctrl config
David Wu
- [U-Boot] [PATCH 8/9] pinctrl: rockchip: Clean the unused rockchip pinctrl drivers
David Wu
- [U-Boot] [PATCH 9/9] ARM: dts: rk322x: Correct the uart2 default pin configuration
David Wu
- [U-Boot] [PATCH 00/14] Add integrated phy support for rk322x and rk3328
David Wu
- [U-Boot] [PATCH 01/14] net: rockchip: Separate rmii and rgmii speed setup
David Wu
- [U-Boot] [PATCH 02/14] net: rockchip: Add rmii interface and rmii speed setup for rk3228 and rk3328
David Wu
- [U-Boot] [PATCH 03/14] net: rockchip: Add integrated phy ops
David Wu
- [U-Boot] [PATCH 04/14] net: rockchip: Add integrated phy for rk3228 and rk3328
David Wu
- [U-Boot] [PATCH 05/14] cllk: rockchip: Change the defined name for CONFIG_RESET_ROCKCHIP
David Wu
- [U-Boot] [PATCH 06/14] clk: rockchip: fix the gmac selection of pll source for rk322x
David Wu
- [U-Boot] [PATCH 07/14] clk: rockchip: Init CPLL 600M for rk322x
David Wu
- [U-Boot] [PATCH 08/14] clk: rockchip: Add SCLK_MAC_SRC clock rate setup
David Wu
- [U-Boot] [PATCH 09/14] ARM: dts: rockchip: Add integrated phy reset and clock for rk322x
David Wu
- [U-Boot] [PATCH 10/14] ARM: dts: rockchip: Enable integrated phy support for rk3229-evb
David Wu
- [U-Boot] [PATCH 11/14] clk: rk3328: Implement the gmac2phy clock assignment
David Wu
- [U-Boot] [PATCH 12/14] ARM: dts: rockchip: Add gmac2phy dts node for rk3328
David Wu
- [U-Boot] [PATCH 13/14] ARM: dts: rockchip: Enable gmac2phy feature for rk3328-evb
David Wu
- [U-Boot] [PATCH 14/14] rockchip: defconfig: Enable CONFIG_RESET_ROCKCHIP for rk3329-evb and rk3328-evb
David Wu
- [U-Boot] [PATCH] uniphier: increase the firmware size in update command environment
Masahiro Yamada
- [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Masahiro Yamada
- [U-Boot] [PATCH 10/10] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Masahiro Yamada
- [U-Boot] [PATCH] ARM: image: indent with tab instead of 4 spaces
Masahiro Yamada
- [U-Boot] [PATCH] cmd: booti: fix invalid image address in debug message
Masahiro Yamada
- [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
Masahiro Yamada
- [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: change load addresses for bigger kernel image
Masahiro Yamada
- [U-Boot] [PATCH 1/2] mtd: nand: tegra: convert to driver model and live tree
Masahiro Yamada
- [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()
Miao Yan
- [U-Boot] About convert to LIVE DT
Kever Yang
- [U-Boot] [PATCH 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver
Kever Yang
- [U-Boot] About convert to LIVE DT
Kever Yang
- [U-Boot] [PATCH 1/2] parse the second area of android image
Kever Yang
- [U-Boot] [PATCH 1/2] core: add uclass_get_device_by_phandle_id() api
Kever Yang
- [U-Boot] [PATCH 2/2] pinctrl-uclass: convert to use live dt
Kever Yang
- [U-Boot] [RESENT PATCH 1/2] core: add uclass_get_device_by_phandle_id() api
Kever Yang
- [U-Boot] [RESENT PATCH 2/2] pinctrl-uclass: convert to use live dt
Kever Yang
- [U-Boot] [PATCH] rockchip: pwm: convert to use live dt
Kever Yang
- [U-Boot] [PATCH] core: add ofnode_get_by_phandle() api
Kever Yang
- [U-Boot] [PATCH] pwm-backlight: make power-supply as option
Kever Yang
- [U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api
Kever Yang
- [U-Boot] [PATCH v2 2/2] pinctrl-uclass: convert to use live dt
Kever Yang
- [U-Boot] [PATCH v2 1/2] disk: part: scan the disk if the part_type is unknown
Kever Yang
- [U-Boot] [PATCH v2 2/2] disk: part: use common api to lookup part driver
Kever Yang
- [U-Boot] [PATCH 1/6] rockchip: clk: rk3036: convert to use live dt
Kever Yang
- [U-Boot] [PATCH 2/6] rockchip: clk: rk3188: convert to use live dt
Kever Yang
- [U-Boot] [PATCH 3/6] rockchip: clk: rk322x: convert to use live dt
Kever Yang
- [U-Boot] [PATCH 4/6] rockchip: clk: rk3288: convert to use live dt
Kever Yang
- [U-Boot] [PATCH 5/6] rockchip: clk: rk3328: convert to use live dt
Kever Yang
- [U-Boot] [PATCH 6/6] rockchip: clk: rk1108: convert to use live dt
Kever Yang
- [U-Boot] About convert to LIVE DT
Kever Yang
- [U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api
Kever Yang
- [U-Boot] [PATCH] core: do not fail in device_probe() when clk set default fail
Kever Yang
- [U-Boot] [PATCH] core: do not fail in device_probe() when clk set default fail
Kever Yang
- [U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api
Kever Yang
- [U-Boot] [PATCH v2 1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Kever Yang
- [U-Boot] [PATCH v2 1/2] rockchip: rk3288: Add TPL_LDSCRIPT
Kever Yang
- [U-Boot] [PATCH 0/3] clk: at91: add usb and plladiv drivers
Wenyou Yang
- [U-Boot] [PATCH 1/3] clk: at91: add USB Host clock driver
Wenyou Yang
- [U-Boot] [PATCH 2/3] clk: at91: add PLLADIV driver
Wenyou Yang
- [U-Boot] [PATCH 3/3] clk: at91: clk-system: add set/get_rate operations
Wenyou Yang
- [U-Boot] U-Boot
Yang, Wenyou
- [U-Boot] U-Boot
Yang, Wenyou
- [U-Boot] [PATCH 0/5] Add 3GiB DRAM support to 64-bit Allwinner SoCs
Icenowy Zheng
- [U-Boot] [PATCH 1/5] sunxi: map DRAM part with 3G size
Icenowy Zheng
- [U-Boot] [PATCH 2/5] sunxi: add Kconfig option for the maximum accessible DRAM
Icenowy Zheng
- [U-Boot] [PATCH 3/5] sunxi: add 3GiB DRAM detection support in main U-Boot
Icenowy Zheng
- [U-Boot] [PATCH 4/5] sunxi: let sunxi_dram_init return unsigned long long
Icenowy Zheng
- [U-Boot] [PATCH 5/5] sunxi: restrict the ram_size to the accessible range in SPL
Icenowy Zheng
- [U-Boot] [linux-sunxi] Re: [PATCH 2/5] sunxi: add Kconfig option for the maximum accessible DRAM
Icenowy Zheng
- [U-Boot] [PATCH 4/5] sunxi: let sunxi_dram_init return unsigned long long
Icenowy Zheng
- [U-Boot] [linux-sunxi] Re: [PATCH 3/5] sunxi: add 3GiB DRAM detection support in main U-Boot
Icenowy Zheng
- [U-Boot] [linux-sunxi] Re: [PATCH 3/5] sunxi: add 3GiB DRAM detection support in main U-Boot
Icenowy Zheng
- [U-Boot] [PATCH 1/2] mtd: nand: tegra: convert to driver model and live tree
Marcel Ziswiler
- [U-Boot] [PATCH 2/2] configs: harmony: enable live tree, mtd and ubi
Marcel Ziswiler
- [U-Boot] PPC405EXr / PPC460EX user manuals
Zorg
- [U-Boot] [PATCH] Convert CONFIG_APBH_DMA et al to Kconfig
stefan at agner.ch
- [U-Boot] [PATCH V2] Convert CONFIG_APBH_DMA et al to Kconfig
stefan at agner.ch
- [U-Boot] [PATCH v2 1/6] Convert CONFIG_NAND_MXS to Kconfig
stefan at agner.ch
- [U-Boot] [PATCH V2] Convert CONFIG_APBH_DMA et al to Kconfig
stefan at agner.ch
- [U-Boot] [PATCH 1/4] arm: imx: mx23: Move MX23 selection to Kconfig
stefan at agner.ch
- [U-Boot] [PATCH V3] Convert CONFIG_APBH_DMA et al to Kconfig
stefan at agner.ch
- [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command
stefan at agner.ch
- [U-Boot] [PATCH] Fix --noheader on fw_printenv
stefan at agner.ch
- [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate
rick at efn.org
- [U-Boot] [PATCH] mx5: Add HAB boot support
andrej.rosano at f-secure.com
- [U-Boot] [PATCH v1 0/7] splash screen on the stm32f746 disco board
yannick fertre
- [U-Boot] [PATCH v1 1/7] video: stm32: stm32_ltdc: add reset
yannick fertre
- [U-Boot] [PATCH v1 2/7] video: stm32: stm32_ltdc: update file header & footer
yannick fertre
- [U-Boot] [PATCH v1 3/7] video: stm32: stm32_ltdc: set rate of the pixel clock
yannick fertre
- [U-Boot] [PATCH v1 4/7] video: stm32: stm32_ltdc: missing set of line interrupt position
yannick fertre
- [U-Boot] [PATCH v1 5/7] video: stm32: stm32_ltdc: set the blending factor
yannick fertre
- [U-Boot] [PATCH v1 6/7] arm: dts: stm32: add ltdc for STM32F746
yannick fertre
- [U-Boot] [PATCH v1 7/7] arm: dts: stm32: add display for STM32F746 disco board
yannick fertre
- [U-Boot] [PATCH v1 0/7] splash screen on the stm32f769 disco board
yannick fertre
- [U-Boot] [PATCH v1 1/7] video: stm32: stm32_ltdc: add bridge to display controller
yannick fertre
- [U-Boot] [PATCH v1 2/7] video: add support of MIPI DSI interface
yannick fertre
- [U-Boot] [PATCH v1 3/7] video: add support of panel OTM8009A
yannick fertre
- [U-Boot] [PATCH v1 4/7] video: add MIPI DSI host controller bridge
yannick fertre
- [U-Boot] [PATCH v1 5/7] video: add support of STM32 MIPI DSI controller driver
yannick fertre
- [U-Boot] [PATCH v1 6/7] arm: dts: stm32: add dsi for STM32F746
yannick fertre
- [U-Boot] [PATCH v1 7/7] arm: dts: stm32: add display for STM32F769 disco board
yannick fertre
- [U-Boot] [PATCH] CMD_PXE: Ramdisk does not pass to the kernel if FDT image does not specified
vlaomao at gmail.com
- [U-Boot] [PATCH 1/2] arm: socfpga: cyclone5: Enable Macronix flash support
chin.liang.see at intel.com
- [U-Boot] [PATCH 2/2] arm: socfpga: cyclone5: Ensure spi-flash in the compatible string
chin.liang.see at intel.com
- [U-Boot] [PATCH v2] arm: socfpga: cyclone5: Enable Macronix flash support
chin.liang.see at intel.com
- [U-Boot] [PATCH] arm: socfpga: gen5: Enabling cache and TLB maintenance broadcast
chin.liang.see at intel.com
- [U-Boot] [PATCH v8 0/4] Generic firmware loader
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 1/4] spl: Remove static declaration on spl_mmc_find_device function
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 2/4] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 3/4] cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 4/4] common: Generic firmware loader for file system
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 0/4] Generic firmware loader
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 1/4] spl: Remove static declaration on spl_mmc_find_device function
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 2/4] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 3/4] cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 4/4] common: Generic firmware loader for file system
tien.fong.chee at intel.com
- [U-Boot] [PATCH] dm: pcie: designware: add correct ATU handling
igall at marvell.com
- [U-Boot] [PATCH] Make cmd_get_data_size() a dependency of setexpr
qlb1234
- [U-Boot] [PATCH v2 0/3] Add set_env_soc_name() for STM32 SoCs
patrice.chotard at st.com
- [U-Boot] [PATCH v2 1/3] mach-stm32: Add set_env_soc_name support
patrice.chotard at st.com
- [U-Boot] [PATCH v2 2/3] mach-stm32: Move BOARD_LATE_INIT flag to mach-stm32 Kconfig
patrice.chotard at st.com
- [U-Boot] [PATCH v2 3/3] board: stm32: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH] configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIG
patrice.chotard at st.com
- [U-Boot] [PATCH 0/6] Add DM timer support for STM32 SoCs family
patrice.chotard at st.com
- [U-Boot] [PATCH 1/6] timer: stm32: Add timer support for STM32 SoCs family
patrice.chotard at st.com
- [U-Boot] [PATCH 2/6] clk: clk_stm32f: Fix stm32_clk_get_rate() for timer
patrice.chotard at st.com
- [U-Boot] [PATCH 3/6] clk: clk_stm32h7: Fix stm32_clk_get_rate() for timer
patrice.chotard at st.com
- [U-Boot] [PATCH 4/6] clk: clk_stm32h7: Fix prescaler for Domain 3
patrice.chotard at st.com
- [U-Boot] [PATCH 5/6] ARM: dts: stm32: Add timer support for STM32F7
patrice.chotard at st.com
- [U-Boot] [PATCH 6/6] board: stm32: switch to DM STM32 timer
patrice.chotard at st.com
- [U-Boot] [PATCH 0/5] STM32: Clean unused and factorize .h files in arch-stm32
patrice.chotard at st.com
- [U-Boot] [PATCH 1/5] arch-stm32f4: Remove fmc.h file
patrice.chotard at st.com
- [U-Boot] [PATCH 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/
patrice.chotard at st.com
- [U-Boot] [PATCH 3/5] arch-stm32: Factorize stm32.h for STM32F4 and F7
patrice.chotard at st.com
- [U-Boot] [PATCH 4/5] arch-stm32: Remove stm32_periph.h
patrice.chotard at st.com
- [U-Boot] [PATCH 5/5] arch-stm32: Clean arch-stm32f7/syscfg.h
patrice.chotard at st.com
- [U-Boot] [PATCH 0/2] stm32_sdmmc2 driver update
patrice.chotard at st.com
- [U-Boot] [PATCH 1/2] mmc: stm32: sdmmc2: add hardware flow control support
patrice.chotard at st.com
- [U-Boot] [PATCH 2/2] mmc: stm32: sdmmc2: add support for st, pin-ckinsdmmc_ckin
patrice.chotard at st.com
- [U-Boot] [PATCH 0/7] clk: clk_stm32f: update and fixes
patrice.chotard at st.com
- [U-Boot] [PATCH 1/7] clk: clk_stm32f: Fix stm32_clk_get_rate()
patrice.chotard at st.com
- [U-Boot] [PATCH 2/7] clk: clk_stm32f: Fix RCC_PLLSAICFGR mask defines
patrice.chotard at st.com
- [U-Boot] [PATCH 3/7] clk: clk_stm32f: No more need of 48Mhz from PLL_SAI
patrice.chotard at st.com
- [U-Boot] [PATCH 4/7] clk: clk_stm32f: Rework SDMMC stm32_clk_get_rate() part
patrice.chotard at st.com
- [U-Boot] [PATCH 5/7] clk: clk_stm32f: Configure SAI PLL to generate LTDC pixel clock
patrice.chotard at st.com
- [U-Boot] [PATCH 6/7] clk: clk_stm32f: Add set_rate for LTDC clock
patrice.chotard at st.com
- [U-Boot] [PATCH 7/7] clk: clk_stm32f: Add DSI clock support
patrice.chotard at st.com
- [U-Boot] [PATCH] ARM: dts: stm32: limit sdio frequency to 14Mhz for stm32f429i-eval
patrice.chotard at st.com
- [U-Boot] [PATCH v2 0/5] STM32: Clean unused and factorize .h files in arch-stm32
patrice.chotard at st.com
- [U-Boot] [PATCH v2 1/5] arch-stm32f4: Remove fmc.h file
patrice.chotard at st.com
- [U-Boot] [PATCH v2 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/
patrice.chotard at st.com
- [U-Boot] [PATCH v2 3/5] arch-stm32: Factorize stm32.h for STM32F4 and F7
patrice.chotard at st.com
- [U-Boot] [PATCH v2 4/5] arch-stm32: Remove stm32_periph.h
patrice.chotard at st.com
- [U-Boot] [PATCH v2 5/5] arch-stm32: Clean arch-stm32f7/syscfg.h
patrice.chotard at st.com
- [U-Boot] [PATCH] ARM: dts: Add support for stm32f746-evaluation board support
patrice.chotard at st.com
- [U-Boot] [PATCH] configs: stm32: Enable DOS_PARTITION for STM32F4/F7 boards
patrice.chotard at st.com
- [U-Boot] [PATCH] mach-stm32: Use default memory map as background region
patrice.chotard at st.com
- [U-Boot] [PATCH 1/3] Interface changes for adding TCP
DH at synoia.com
- [U-Boot] [PATCH 2/3] TCP code. All is new.
DH at synoia.com
- [U-Boot] [PATCH 3/3] wget.c, wget.h and modified tftp.c.
DH at synoia.com
- [U-Boot] [PATCH] This patch is the Interfaces changes for, net.h, net.c, ping.c files for introducing TCP and wget into u-boot.
DH at synoia.com
- [U-Boot] TCP & Overrrun
dh at synoia.com
- [U-Boot] Minnowmax Turbot not supported
vnktux
- [U-Boot] [PATCH 1/1] Broadwell-DE Implementation
vnktux
- [U-Boot] FEC Clock
Mehmet Ali İPİN
- [U-Boot] [PATCH] block: Migrate SystemACE chip to Kconfig
Алексей Бродкин
- [U-Boot] [U-Boot, v2, 01/12] riscv: cpu: Add nx25 to support RISC-V
陳建志
- [U-Boot] [U-Boot, v2, 01/12] riscv: cpu: Add nx25 to support RISC-V
陳建志
Last message date:
Wed Feb 28 23:48:22 UTC 2018
Archived on: Thu Mar 1 11:51:12 UTC 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).