[U-Boot] [PATCH V2] Convert CONFIG_APBH_DMA et al to Kconfig
Adam Ford
aford173 at gmail.com
Mon Feb 5 13:33:13 UTC 2018
This converts the following to Kconfig:
CONFIG_APBH_DMA
CONFIG_APBH_DMA_BURST
CONFIG_APBH_DMA_BURST8
Signed-off-by: Adam Ford <aford173 at gmail.com>
---
Changes in V2:
Rebase on [U-Boot,v2,1/6] Convert CONFIG_NAND_MXS to Kconfig
Make the NAND controller in MX6 MX7 autoselect the DMA options
configs/bg0900_defconfig | 1 +
configs/mx23_olinuxino_defconfig | 1 +
configs/mx23evk_defconfig | 1 +
configs/mx28evk_auart_console_defconfig | 3 +--
configs/mx28evk_defconfig | 3 +--
configs/mx28evk_spi_defconfig | 3 +--
configs/sansa_fuze_plus_defconfig | 1 +
configs/sc_sps_1_defconfig | 1 +
configs/ts4600_defconfig | 1 +
configs/xfi3_defconfig | 1 +
drivers/dma/Kconfig | 14 ++++++++++++++
drivers/mtd/nand/Kconfig | 3 +++
include/configs/aristainetos-common.h | 3 ---
include/configs/cm_fx6.h | 3 ---
include/configs/colibri_imx7.h | 3 ---
include/configs/gw_ventana.h | 3 ---
include/configs/imx6-engicam.h | 4 ----
include/configs/imx6_logic.h | 3 ---
include/configs/mx6sabreauto.h | 3 ---
include/configs/mx6sxsabreauto.h | 3 ---
include/configs/mx7dsabresd.h | 3 ---
include/configs/mxs.h | 1 -
include/configs/pcm058.h | 3 ---
include/configs/pfla02.h | 3 ---
include/configs/platinum.h | 3 ---
include/configs/titanium.h | 3 ---
scripts/config_whitelist.txt | 3 ---
27 files changed, 27 insertions(+), 50 deletions(-)
diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig
index 72616ae..7314eff 100644
--- a/configs/bg0900_defconfig
+++ b/configs/bg0900_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_DOS_PARTITION=y
+CONFIG_APBH_DMA=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig
index 628c11d..2c80c3b 100644
--- a/configs/mx23_olinuxino_defconfig
+++ b/configs/mx23_olinuxino_defconfig
@@ -20,6 +20,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_APBH_DMA=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig
index 6ad7f2c..09f3611 100644
--- a/configs/mx23evk_defconfig
+++ b/configs/mx23evk_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig
index 0927333..7bdb905 100644
--- a/configs/mx28evk_auart_console_defconfig
+++ b/configs/mx28evk_auart_console_defconfig
@@ -16,7 +16,6 @@ CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -34,9 +33,9 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
-CONFIG_NAND_MXS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SST=y
CONFIG_USB=y
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index 21d01bc..d36ad0e 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -16,7 +16,6 @@ CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -34,9 +33,9 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
-CONFIG_NAND_MXS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SST=y
CONFIG_USB=y
diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig
index dab5394..7bf1d6e 100644
--- a/configs/mx28evk_spi_defconfig
+++ b/configs/mx28evk_spi_defconfig
@@ -15,7 +15,6 @@ CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -33,9 +32,9 @@ CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
-CONFIG_NAND_MXS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SST=y
CONFIG_USB=y
diff --git a/configs/sansa_fuze_plus_defconfig b/configs/sansa_fuze_plus_defconfig
index f2e61c7..d7ec119 100644
--- a/configs/sansa_fuze_plus_defconfig
+++ b/configs/sansa_fuze_plus_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/sc_sps_1_defconfig b/configs/sc_sps_1_defconfig
index faebc04..792d39d 100644
--- a/configs/sc_sps_1_defconfig
+++ b/configs/sc_sps_1_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_PHYLIB=y
CONFIG_USB=y
diff --git a/configs/ts4600_defconfig b/configs/ts4600_defconfig
index aab0737..45b872b 100644
--- a/configs/ts4600_defconfig
+++ b/configs/ts4600_defconfig
@@ -17,5 +17,6 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig
index 6cdea5e..e335407 100644
--- a/configs/xfi3_defconfig
+++ b/configs/xfi3_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_APBH_DMA=y
CONFIG_MMC_MXS=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 1b92c77..a95d4ce 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -19,4 +19,18 @@ config TI_EDMA3
This driver support data transfer between memory
regions.
+config APBH_DMA
+ bool "Support APBH DMA"
+ help
+ Enable APBH DMA driver.
+
+if APBH_DMA
+config APBH_DMA_BURST
+ bool "Enable DMA BURST"
+
+config APBH_DMA_BURST8
+ bool "Enable DMA BURST8"
+
+endif
+
endmenu # menu "DMA Support"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 97ec6cf..4453688 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -142,6 +142,9 @@ config NAND_MXS
bool "MXS NAND support"
depends on MX6 || MX7
imply CMD_NAND
+ select APBH_DMA
+ select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
+ select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
help
This enables NAND driver for the NAND flash controller on the
MXS processors.
diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index 9b1a39d..69de44a 100644
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -182,9 +182,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 90cf024..39d166a 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -184,9 +184,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* APBH DMA is required for NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
#endif
/* Ethernet */
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index d4aaff6..5d9b212 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -170,9 +170,6 @@
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 517ad08..6e994b5 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -73,9 +73,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
- #define CONFIG_APBH_DMA
- #define CONFIG_APBH_DMA_BURST
- #define CONFIG_APBH_DMA_BURST8
#endif
#endif /* CONFIG_SPI_FLASH */
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 5f43dfb..246a636 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -161,10 +161,6 @@
/* MTD device */
# define CONFIG_MTD_DEVICE
# define CONFIG_MTD_PARTITIONS
-
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
#endif
/* Ethernet */
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index f0ff5b2..8b91a53 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -156,9 +156,6 @@
# define CONFIG_MTD_PARTITIONS
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* EEPROM contains serial no, MAC addr and other Logic PD info */
#define CONFIG_I2C_EEPROM
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 9982685..bba15a7 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -72,9 +72,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* PMIC */
#define CONFIG_POWER
diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 02d6acf..06e416b 100644
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -125,9 +125,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Network */
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index fd39f22..3a9eaf9 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -197,9 +197,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
#endif
#define CONFIG_ENV_OFFSET (12 * SZ_64K)
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 21e51fc..c3e3f59 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -99,7 +99,6 @@
*/
/* APBH DMA */
-#define CONFIG_APBH_DMA
/* GPIO */
#define CONFIG_MXS_GPIO
diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h
index 6c0902a..ec74ed7 100644
--- a/include/configs/pcm058.h
+++ b/include/configs/pcm058.h
@@ -65,9 +65,6 @@
#endif
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Filesystem support */
#define CONFIG_MTD_PARTITIONS
diff --git a/include/configs/pfla02.h b/include/configs/pfla02.h
index 83198a1..2001d5d 100644
--- a/include/configs/pfla02.h
+++ b/include/configs/pfla02.h
@@ -64,9 +64,6 @@
#endif
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Filesystem support */
#define CONFIG_MTD_PARTITIONS
diff --git a/include/configs/platinum.h b/include/configs/platinum.h
index 24c8de9..339ff91 100644
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -75,9 +75,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA config, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Environment in NAND */
#define CONFIG_ENV_OFFSET (16 << 20)
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index ea18cb6..0fe40ee 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -148,9 +148,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
/* Environment in NAND */
#define CONFIG_ENV_OFFSET (16 << 20)
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index ef83c00..bc097db 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -31,9 +31,6 @@ CONFIG_AM335X_USB1_MODE
CONFIG_AM437X_USB2PHY2_HOST
CONFIG_ANDES_PCU
CONFIG_ANDES_PCU_BASE
-CONFIG_APBH_DMA
-CONFIG_APBH_DMA_BURST
-CONFIG_APBH_DMA_BURST8
CONFIG_APER_0_BASE
CONFIG_APER_1_BASE
CONFIG_APER_SIZE
--
2.7.4
More information about the U-Boot
mailing list