[U-Boot] [PATCH v2 05/13] drivers: net: pfe_eth: LS1012A PFE headers
Joe Hershberger
joe.hershberger at ni.com
Tue Feb 27 19:29:15 UTC 2018
On Thu, Feb 15, 2018 at 8:17 AM, Calvin Johnson <calvin.johnson at nxp.com> wrote:
> Contains all the pfe header files.
Looks good, but I'd like to move the files.
>
> Signed-off-by: Calvin Johnson <calvin.johnson at nxp.com>
> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi at nxp.com>
> ---
> Changes in v2:
> -Add pfe_rx_done to clear bd after packet processing
> -remove unused code under CONFIG_UTIL_PE_DISABLED
> -Used BIT and GENMASK macros wherever applicable
> -Removed generic definitions that pollutes namespace
> -File names pfe.h renamed to pfe_hw.h to be more clear as it contains
> low level functions that directly access pfe hardware block
> -Added pfe_dm_eth.h for new driver model
> ---
> include/dm/platform_data/pfe_dm_eth.h | 21 ++++
This is fine.
> include/pfe_eth/pfe/cbus.h | 77 +++++++++++++++
> include/pfe_eth/pfe/cbus/bmu.h | 40 ++++++++
> include/pfe_eth/pfe/cbus/class_csr.h | 180 ++++++++++++++++++++++++++++++++++
> include/pfe_eth/pfe/cbus/emac.h | 140 ++++++++++++++++++++++++++
> include/pfe_eth/pfe/cbus/gpi.h | 62 ++++++++++++
> include/pfe_eth/pfe/cbus/hif.h | 68 +++++++++++++
> include/pfe_eth/pfe/cbus/hif_nocpy.h | 40 ++++++++
> include/pfe_eth/pfe/cbus/tmu_csr.h | 148 ++++++++++++++++++++++++++++
> include/pfe_eth/pfe/cbus/util_csr.h | 47 +++++++++
> include/pfe_eth/pfe/pfe_hw.h | 163 ++++++++++++++++++++++++++++++
Please move these to include/net/pfe/*
> include/pfe_eth/pfe_driver.h | 59 +++++++++++
> include/pfe_eth/pfe_eth.h | 104 ++++++++++++++++++++
> include/pfe_eth/pfe_firmware.h | 17 ++++
> include/pfe_eth/pfe_mdio.h | 13 +++
Please move these to include/net/pfe/*
> 15 files changed, 1179 insertions(+)
> create mode 100644 include/dm/platform_data/pfe_dm_eth.h
> create mode 100644 include/pfe_eth/pfe/cbus.h
> create mode 100644 include/pfe_eth/pfe/cbus/bmu.h
> create mode 100644 include/pfe_eth/pfe/cbus/class_csr.h
> create mode 100644 include/pfe_eth/pfe/cbus/emac.h
> create mode 100644 include/pfe_eth/pfe/cbus/gpi.h
> create mode 100644 include/pfe_eth/pfe/cbus/hif.h
> create mode 100644 include/pfe_eth/pfe/cbus/hif_nocpy.h
> create mode 100644 include/pfe_eth/pfe/cbus/tmu_csr.h
> create mode 100644 include/pfe_eth/pfe/cbus/util_csr.h
> create mode 100644 include/pfe_eth/pfe/pfe_hw.h
> create mode 100644 include/pfe_eth/pfe_driver.h
> create mode 100644 include/pfe_eth/pfe_eth.h
> create mode 100644 include/pfe_eth/pfe_firmware.h
> create mode 100644 include/pfe_eth/pfe_mdio.h
>
Thanks,
-Joe
More information about the U-Boot
mailing list