[U-Boot] [PATCH v4 12/12] optee: Add CONFIG_OPTEE_LOAD_ADDR

[Bryan O'Donoghue]

CONFIG_OPTEE_LOAD_ADDR is used to tell u-boot where to load the OPTEE
binary into memory prior to handing off control to OPTEE.

We need to pull this value out of u-boot in order to produce an IMX IVT/CSF
signed pair for the purposes of secure boot. The best way to do that is to
have CONFIG_OPTEE_LOAD_ADDR appear in u-boot.cfg.

Adding new CONFIG entires to u-boot should be kconfig driven so this patch
does just that.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin at linaro.org>
---
 lib/optee/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/lib/optee/Kconfig b/lib/optee/Kconfig
index 9e9ef39..541f10a 100644
--- a/lib/optee/Kconfig
+++ b/lib/optee/Kconfig
@@ -6,6 +6,12 @@ config OPTEE
           OPTEE-specific checks before booting an OPTEE image created with
           mkimage.
 
+config OPTEE_LOAD_ADDR
+	hex "OPTEE load address"
+	default 0x00000000
+	help
+	  The load address of the bootable OPTEE binary.
+
 config OPTEE_TZDRAM_SIZE
 	hex "Amount of Trust-Zone RAM for the OPTEE image"
 	depends on OPTEE
-- 
2.7.4