[U-Boot] [PATCH v2 9/9] rk3288: vyasa: Add eMMC boot support

[Jagan Teki]

RK3288 Vyasa has eMMC boot support, with JP4 open.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Note:
Linux patch for this support is in ML.

 arch/arm/dts/rk3288-vyasa-u-boot.dtsi     |  4 ++++
 arch/arm/dts/rk3288-vyasa.dts             | 11 +++++++++++
 board/amarula/vyasa-rk3288/vyasa-rk3288.c |  7 +++++++
 3 files changed, 22 insertions(+)

diff --git a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
index b3a56e9..6017ca2 100644
--- a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
@@ -20,6 +20,10 @@
 	u-boot,dm-pre-reloc;
 };
 
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
 &uart2 {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 70c433f..850aa25 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -155,6 +155,17 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>;
diff --git a/board/amarula/vyasa-rk3288/vyasa-rk3288.c b/board/amarula/vyasa-rk3288/vyasa-rk3288.c
index 7985671..82f8c4e 100644
--- a/board/amarula/vyasa-rk3288/vyasa-rk3288.c
+++ b/board/amarula/vyasa-rk3288/vyasa-rk3288.c
@@ -9,6 +9,13 @@
 #ifndef CONFIG_TPL_BUILD
 #include <spl.h>
 
+void board_boot_order(u32 *spl_boot_list)
+{
+	/* eMMC prior to sdcard. */
+	spl_boot_list[0] = BOOT_DEVICE_MMC2;
+	spl_boot_list[1] = BOOT_DEVICE_MMC1;
+}
+
 int spl_start_uboot(void)
 {
         /* break into full u-boot on 'c' */
-- 
2.7.4