[U-Boot] [PATCH v3 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry

[Shyam Saini]

> Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6
> platform with NAND_MXS defined.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Changes for v3:
> - Fixed Typo 'seprate'
> Changes for v2:
> - New patch
>
>  arch/arm/mach-imx/Kconfig | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 3aec89d..1b9c275 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -71,6 +71,17 @@ config CMD_HDMIDETECT
>           This enables the 'hdmidet' command which detects if an HDMI monitor
>           is connected.
>
> +config CMD_NANDBCB
> +       bool "i.MX6 NAND Boot Control Block(BCB) command"
> +       depends on NAND && CMD_MTDPARTS
> +       default y if ARCH_MX6 && NAND_MXS
> +       help
> +         Unlike normal 'nand write/erase' commands, this command update
> +         Boot Control Block(BCB) for i.MX6 platform NAND IP's.
> +
> +         This is similar to kobs-ng, which is used in Linux as separate
> +         rootfs package.
> +
>  config NXP_BOARD_REVISION
>         bool "Read NXP board revision from fuses"
>         depends on ARCH_MX6 || ARCH_MX7

Tested By : Shyam Saini <shyam at amarulasolutions.com>