[U-Boot] [PATCH v3 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry
Jagan Teki
jagannadh.teki at gmail.com
Wed Feb 7 16:03:22 UTC 2018
Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6
platform with NAND_MXS defined.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- Fixed Typo 'seprate'
Changes for v2:
- New patch
arch/arm/mach-imx/Kconfig | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3aec89d..1b9c275 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -71,6 +71,17 @@ config CMD_HDMIDETECT
This enables the 'hdmidet' command which detects if an HDMI monitor
is connected.
+config CMD_NANDBCB
+ bool "i.MX6 NAND Boot Control Block(BCB) command"
+ depends on NAND && CMD_MTDPARTS
+ default y if ARCH_MX6 && NAND_MXS
+ help
+ Unlike normal 'nand write/erase' commands, this command update
+ Boot Control Block(BCB) for i.MX6 platform NAND IP's.
+
+ This is similar to kobs-ng, which is used in Linux as separate
+ rootfs package.
+
config NXP_BOARD_REVISION
bool "Read NXP board revision from fuses"
depends on ARCH_MX6 || ARCH_MX7
--
2.7.4
More information about the U-Boot
mailing list