[U-Boot] [PATCH v3 0/3] ARM: omap3: beagle, evm: synchronize common setup

Derald D. Woods woods.technical at gmail.com
Mon Feb 26 23:52:56 UTC 2018


This short series is an attempt to make this set of boards use the same
default configuration items where possible. This was prompted by an
investigation into enabling SERIAL_SEARCH_ALL on omap3_evm. This feature
now works for omap3_evm after this series.

The series changes the default NAND layout of MTDPARTS_DEFAULT. More
detail is provided with the patches. As most things are configurable
now, this should not be an issue. I am trying to get simple defaults
that just boot and expose the common core features. This will make
future testing and maintenance a bit more predictable, as there will
be a very similar and comparable set of boards.

Derald D. Woods (3):
  ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
  ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND
    layout
  ARM: omap3: evm: Sync with omap3_beagle configuration

 board/ti/beagle/beagle.c       |   8 ++
 configs/omap3_beagle_defconfig |  25 ++++-
 configs/omap3_evm_defconfig    |  21 ++--
 include/configs/omap3_beagle.h | 239 +++++++++++++++++++++++------------------
 include/configs/omap3_evm.h    |  71 ++++++------
 5 files changed, 212 insertions(+), 152 deletions(-)

--

v3:
- Leave environment in NAND

v2:
- update cover letter and remove 'RFC' from series
- rebase and test on recent master

-- 
2.16.2



More information about the U-Boot mailing list