[U-Boot] [PATCH v2 3/9] mips: bmips: add wap-5813n usb support
Álvaro Fernández Rojas
noltari at gmail.com
Sun Feb 4 20:10:15 UTC 2018
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
v2: use correct phy driver
arch/mips/dts/comtrend,wap-5813n.dts | 12 ++++++++++++
configs/comtrend_wap5813n_ram_defconfig | 9 +++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/mips/dts/comtrend,wap-5813n.dts b/arch/mips/dts/comtrend,wap-5813n.dts
index 29386e2662..f1f5430b42 100644
--- a/arch/mips/dts/comtrend,wap-5813n.dts
+++ b/arch/mips/dts/comtrend,wap-5813n.dts
@@ -51,10 +51,18 @@
};
};
+&ehci {
+ status = "okay";
+};
+
&gpio0 {
status = "okay";
};
+&ohci {
+ status = "okay";
+};
+
&pflash {
status = "okay";
};
@@ -63,3 +71,7 @@
u-boot,dm-pre-reloc;
status = "okay";
};
+
+&usbh {
+ status = "okay";
+};
diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig
index 985bd3cc25..32cecc7e8b 100644
--- a/configs/comtrend_wap5813n_ram_defconfig
+++ b/configs/comtrend_wap5813n_ram_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_LICENSE=y
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set
@@ -37,8 +38,16 @@ CONFIG_LED_GPIO=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CFI_FLASH=y
+CONFIG_PHY=y
+CONFIG_BCM6368_USBH_PHY=y
CONFIG_DM_RESET=y
CONFIG_RESET_BCM6345=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SERIAL=y
CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
--
2.11.0
More information about the U-Boot
mailing list