[U-Boot] [PATCH v2 07/13] Convert CONFIG_BOOTCOUNT_EXT to Kconfig

[Alex Kiernan]

This converts the following to Kconfig:
  CONFIG_BOOTCOUNT_EXT

Signed-off-by: Alex Kiernan <alex.kiernan at gmail.com>
---

Changes in v2: None

 README                      | 7 -------
 configs/ge_b450v3_defconfig | 2 ++
 configs/ge_b650v3_defconfig | 2 ++
 configs/ge_b850v3_defconfig | 2 ++
 include/configs/ge_bx50v3.h | 4 ----
 5 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/README b/README
index 0157f0b..9eb4f5a 100644
--- a/README
+++ b/README
@@ -2309,13 +2309,6 @@ The following options need to be configured:
 - bootcount support:
 		CONFIG_AT91SAM9XE
 		enable special bootcounter support on at91sam9xe based boards.
-		CONFIG_BOOTCOUNT_EXT
-		enable support for the bootcounter in EXT filesystem
-			CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
-                                                    and write.
-			CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
-			CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
-			CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
 
 - Show boot progress:
 		CONFIG_SHOW_BOOT_PROGRESS
diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig
index a5beefe..32f07ab 100644
--- a/configs/ge_b450v3_defconfig
+++ b/configs/ge_b450v3_defconfig
@@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_NETDEVICES=y
diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig
index cbf83b1..188238e 100644
--- a/configs/ge_b650v3_defconfig
+++ b/configs/ge_b650v3_defconfig
@@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_NETDEVICES=y
diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig
index 953681f..96ac173 100644
--- a/configs/ge_b850v3_defconfig
+++ b/configs/ge_b850v3_defconfig
@@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_NETDEVICES=y
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 8dc0a7f..0a72b58 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -267,10 +267,6 @@
 
 #define CONFIG_BCH
 
-#define CONFIG_BOOTCOUNT_EXT
-#define CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE	"mmc"
-#define CONFIG_SYS_BOOTCOUNT_EXT_DEVPART	"1:5"
-#define CONFIG_SYS_BOOTCOUNT_EXT_NAME		"/boot/failures"
 #define CONFIG_SYS_BOOTCOUNT_ADDR		0x7000A000
 
 #endif	/* __GE_BX50V3_CONFIG_H */
-- 
2.7.4